i stumbled accross the following website: URL...As you can see, the site is driven using a hd video. the user can interact with the site by performing little actions with the mouse. I guess this is simply accomplished by seeking through the video using the mousemovements as offset.What i would like to know is, how are videos like this encoded ? How big is the video behind a site like this ? Is the HD content streamed from the server ? What compression would you recommend for similar quality ? Do you guys know a tutorial/article that deals with constructing "video driven" websites like the one above ?
i did a flashsite feeded by xml with text etc. html formatted etc.i am wondering if there is any possibility to use a backoffice system with a login to make my clients modify the xml files... something with an integrated html editor o.e.i could set up typo3 to make a backoffice to edit online xml files, but there must be something better for this.
Recently i have visited so many video enriched flash site like this one [URL] Most of them shows video in full size. I downloaded the video using FF plugin. Video framesize is very small compared to the stage size. When i tried to add video and resize the video acoording to the page size , it slows the browser. I tried to embed the flv inside an swf and loaded the swf using normal loader and plyed it.. but the quallity and performance comapred to these site is very low..
I read an Adobe article which demonstrated H.264 video playback support in Flash Player. Would video encoded in this format be more compressed than typical FLV videos? Should I be using this format for video I place on websites from now on?
use Flash's StageVideo object through the example ActionScript file in this page [URL] the problem is it's just showing up a black screen (no video) for live streams which are not using the H264 codec?and also it is not even throwing up a StageVideoEvent.RENDER_STATE event to say that it cannot play the stream. Actually it can seem to play the stream because I can hear audio but it is just unable to show up any video, anybody encountered this scenario before?Someone commented on some other sites to check if the "Enable Hardware Acceleration" in the Flash settings is checked, and I can confirm that it is checked, again this is only happening whenever I'm viewing a non-H264 stream
Right now I am working on an AIR 3.2 application which lets you stream a video to a Flash Media Server and saves it on a hard drive.This sequence works fine with the standard Sorenson codec but I want to use H.264 for my videos. I found lots example c ode and implemented it in my code, but when I record a video of myself I am unable to re-watch it afterwards.I found how to implement a H.264 encoding in a realeyes blog post here. My code is here.It saves the video as a .f4v file, but my browser (I've tried the latest versions of both Chrome and Firefox, with the latest Flash) and also VLC are unable to load the video. I also used a program called Movie Player which is able to open the file but can only show the first frame and the audio. Neither am I able to upload the video to YouTube because they do not support the file extension.Here is an example video file it saved: H264Test1.f4v.My question is: How do I stream and save the movie with a file extension that I am able to re-watch while using the H.264 codec?
I�m building an iPad 2 app with Flash with ActionScript 3 (Adobe CS5.5), what I want to do is to wrap my two sections of the video (h264) inside the final app? I do not want to stream the video or load it external, "I need it to be included in the app locally" (inside the final package)!I need it to be in one application, to upload to the iTunes Store/Google market�
PS like to do the same with Android, the package (apk) no stream video.
Recently i have visited so many video enriched flash site like this one[url]...
Most of them shows video in full size . I downloaded the video using FF plugin.Video framesize is very small compared to the stage size. When i tried to add video and resize the video acoording to the page size , it slows the browser. I tried to embed the flv inside an swf and loaded the swf using normal loader and plyed it.. but the quallity and performance comapred to these site is very low..
Can someone put some light on how to make video enriched flash site?
Setup: an online tv channel with "youtube" like clips and categories our own flash video player which can be embeded into other remote sites as2 flash player Goal: To track who's embeding my videos, at least with basic statistics per domain.
Since it's AS2, it's harder to do this. My ideea is that I can create a php page which should be opened each time the player loads on any website; than the flash player can do a "geturl" of the php file which has Google Analytics code or some other decent tracker.
The geturl command could contain a variable like the Video Title which already is included in the player; and this title would pass on with GET to the php file and setup a dynamic page title which can be tracked very well. Problem: how to i use the GETURL function without have user's browser open a new tab or window. Is there any hidden way to do it?
I'm trying to publish video streaming over internet. I want to use the h264 codec in FMS for that. Is there any in built property or setting to use h264 or have to use library for that. And also want to know among VP6, sorenson and 264 which is better to use.
I stream some h264 videos to my application in FMS3.5， the videos can be played in FMS, but don't work in the local playback, <s:VideoPlayer source="test.f4v" x="31" y="18" width="402" height="206"/>. I get some h264 videos from FMS application "vod", they work well.
I'm building an iPad 2 app with Flash with ActionScript 3 (Adobe CS5.5), what I want to do is to wrap my two sections of the video (h264) inside the final app?To clarify, I do not want to stream the video or load it external, "I need it to be included in the app locally" (inside the final package)!I need it to be in one application, to upload to the iTunes Store/Google market...PS like to do the same with Android, the package (apk) no stream video.
I'm trying to use Flash's StageVideo object through the example ActionScript file in this page(http:url....), the problem is it's just showing up a black screen (no video) for live streams which are not using the H264 codec? and also it is not even throwing up a StageVideoEvent.RENDER_STATE event to say that it cannot play the stream. Actually it can seem to play the stream because I can hear audio but it is just unable to show up any video.
Someone commented on some other sites to check if the "Enable Hardware Acceleration" in the Flash settings is checked, and I can confirm that it is checked, again this is only happening whenever I'm viewing a non-H264 stream.Can the StageVideo be used to view live stream using screenshare codec (SVC2)? I have tried viewing H263 stream and it plays fine, only when viewing live stream using screenshare codec that I'm encountering this problem
I bought a flash site template that loads xml driven swfs inside the main swf as different menu items are clicked. The modules that come with the template work fine, but I don't know how to add a third party xml driven swf, so that it shows up properly. While the third party swf works fine as a standalone, the embedded version loads just an empty movie.
I have created an swf where I can record the webcam picture as H264 video to a FMS 4.5 (I am using the developer version).My code is looking like this:
var h264Settings = new H264VideoStreamSettings(); h264Settings.setProfileLevel("baseline", "1.2");[code]....
I can then replay the video from FMS just fine, but if I try to copy the video from the FMS application directory into a local project and try to play the video with the FLVPlayback component, or with the Adobe Media Player, it is not playing at all.Is this to be expected? Can't I record a webcam video with FMS in H264 and use that video later without FMS?
Same file streamed from FMS4 (same on 3.5) with rtmp protocol has very poor quality compared to real file quality. Is there some low level configuration to do on Flash Server? Is the streaming server making some kind of transcoding before sending the stream? Or it can be Flash Player? Tried unchecking "hardware acceleration" but nothing changes. I am on a local gigabit network, so no network bottlenecks. Video seems very pixelated on the edges (not soft/antialiased). These are the file details:
On our own website, it's easy to protect against direct links to our video content by grabbing a token through AJAX and verifying the token through PHP before the file download is started.
However I'm also researching how I could provide an embed feature, like YouTube or vimeo etc., without compromising this security feature.
The problem is that the embed code I want to provide should look something like <object>...<embed>...</embed></object> -- but I don't know how to grab and append the token to the filename. I mean, I guess I could attach a script that did some gnarly JNOP business, but that's too dirty.I'm using JW Player for the actual video container.
I'm building a website that will allow 2 different users to meet in a secure, private video conference. Wondering if our develpoers can use the Flash Media Server to integrate this functionality into our site? Here are requirements that we need to support:Scheduled video conferences:* User1 an click "start video session" link and are put into a video conference room* If someone who is not the user1 or user2 clicks link, throw "You don't have access to this chat" error
I have put together a XML Driven Video Player with auto thumbnail detection but there is a problem.The Video plays but, The thumbs will not show. I think my thumbnail function is not reaching the correct node in my XML.Can someone take a look at my Actionscript Please? The Action Script is below. The XML is at the bottom of this post. The top half of the code is the video playing code the bottom is for the thumbs.
var nc:NetConnection = new NetConnection(); nc.connect(null); var ns:NetStream = new NetStream(nc); ns.setNufferTime(30);
I am trying to create a dynamic xml driven video playlist, that will display the thumbnail, title and time duration of the video (quite similar to the one on youtube). But I don't know where to begin and I have been googling for some helpful tutorials but cant find anything resourceful.if I shall use the Flash component for scrolling purpose or I shall learn to develop my own scroller with scrollbar.
I´m having problems with h.264 in Flash. streaming a h.264 video from Red5 to a Flash client with ActionScript 3 or 4. The original code supports streaming video in .flv format with Sorensen and I would like to support .flv format with h.264 encoding. Does someone know something about? This is my original code:
play_btn.play_symbol_txt.background = false; stop(); isPaused = true; var nc:NetConnection = new NetConnection();
I'm toying with an Adobe Air app that plays quite large movies. I want to run it on a 1920x1080 display connected to a Mac. Unfortunately, the movies tend to stutter and I'm betting that happens because I'm not using HW GPU acceleration for H264 playback.
Most of the player code is ported (aka copied) from a web player I built and which runs very smooth on the Flash Player from the browser. So the code shouldn't be the problem.
In the Flash Player, to use GPU acceleration in a fullscreen mode, you have to set the Stage.fullscreenSourceRect property. However, this doesn't seem to work in Adobe Air...
Is there any command line tools to move an h264/mp4 index to the beginning so that flash will start playing the file quicker over the net? I am aware of the tool QTIndexSwapper however it is not command line.
Alternatively is there an ffmpeg command to place the index at the front during an encoding?
Probably this feature is in the next generation of FMS 4.5 However, it is said this can be achieved with some manipulation of files with current FMS. Can we do a 2-way live video session.
UserA(in webpage flashplayerV11 beta: encode using H264) -> Flash Media Server -> UserB at iPhone(either HTML5 or others to play the live video in RTMP/RTMFP)
Next step will be the reverse:UserA(in webpage flashplayerV11 beta: decode using H264) <- Flash Media Server <- UserB at iPhone(either HTML5 or others to publish the live video in RTMP/ RTMFP)Better to use UDP based.Seems the HTTP live streaming incurs huge delay 4-8sec; not really working for live video chat sessions.. So how Skype handle this on iOS? with its own encoding/decoding?
I am using the new Flash Player 11 ability to encode H264 video within the Flash Player. I am streaming the webcam via RTMP to a FMS. I am using the following settings:H.264 BaselineLevel 5.1Keyframe freq. 5 seconds25 FPSInput size: 1280 x 720 (720p)Output size: 1280 x 720 (720p)Bit Rate: 1000KbpsWhen I am using these settings with FMLE 3.2, the final stream plays very fluent with a good amount of FPS. If I am using Flash Player 11 for the encoding job instead, the final video is not as fluent as before and achieves less FPS (maybe 5 FPS).So the question is: is Flash Player 11 not as good as FMLE 3.2 or am I missing some configuration?
how to view macromedia flash sites i have vista firefox and adobe flash player 10 but i still cant use the site [URL] can i install macromedia flash player over my adobe flash player without errors
i would like to hear some feedback on how to seo flash sites using deep linking. I am using swfAddress and swfObject but the urls generated by swfAdress with # anchors are not really seo friendly, google just ignores enything behind the "#" and this could be end in cloaking.
