I have a text input field. When I press on it I'd like something to happen. But it doesn't seem like I can target the input field like this.
myTextInputFieldName.onPress = function {
do something
}
I tried putting it inside another movieclip (which I can target), but then the text input cursor goes away and I can no longer access the input text box. I know there is probably a simple solution but I can't figure it out.
I have 4 dynamic text boxes which duplicates the text from a main input text box. How do I write a code to make visible only the dynamic text box I want when clicked it's check box.What is the CODE to make each "DYNAMIC TEXTBOX" visible when clicked on it's checkbox?
View 6 RepliesI need to have an outline for the text typed in my input text boxes. How do I achieve this?
View 5 RepliesI have: Input text box Dynamic text box What's the code and where do i put it, so when entering a value to the input text, the dynamic will show the amount multiplied by 20?
View 1 RepliesI have a INPUT TEXT inside a mc called "txt mc" and DYNAMIC TEXT in the main time line.I'm trying to display what's typed in the INPUT TEXT (my_Input_Txt) in the DYNAMIC TEXT boxes (my_Dyn_Txt1, my_Dyn_Txt2, my_Dyn_Txt3).Here's the code. But it won't simply work perhaps because the INPUT TEXT is inside a MC. I need to have the INPUT TEXT INSIDE THAT MC while having the DYNAMIC TEXT boxes out in the main time line.
my_Input_Txt.onChanged = function() {
my_Dyn_Txt1.text = my_Input_Txt.text;
my_Dyn_Txt2.text = my_Input_Txt.text;
my_Dyn_Txt3.text = my_Input_Txt.text;
};
I have a problem with Input Text boxes within an exported swf. The font (Arial Narrow) has been embedded via Text > Font Embedding (Uppercase, Lowercase, Numerals, and Puncuation checked); but, upon export, certain characters do not register (specifically j, q. u, z, 8, and 9) or automatically take one case or the other (B, M, W, and X are always Uppercase; while k always appears as Lowercase).
View 1 RepliesSetting variables. Have a look at the file. Current height and width are both set at 200. I dont think i got the scripting right, or it may be in the wrong place.
View 4 RepliesI need some input text to read the same in both a dynamic and input text field, but I need the input text field to be left-aligned with a smaller font size than the dynamic text field. I tried left-aligining the input text field in Flash, and it just converted it back when I tested the movie. I have given both fields the same variable. How can I accomplish this?
View 11 RepliesI have four text input boxes, and I need to be able to script it so that when the "Done" button is pushed each of the boxes are checked for the right input. I've tried two different methods, neither of which work or the answer is automatically correct.
View 3 Repliesi was hoping that someone might have an answer to my question. is there ANY way to dynamically change the kerning of an input box? i'd like to give users the ability to modify the kerning of my .swf file. i know flash allows you to change properties like font size, colour, alignment, etc., but i can't find a way to change the kerning property. i don't even think one exists for them. so is there any kind of work around to this?also, is there any reason why i can't use negative values for leading for the input box? it only allows me to use positive numbers when i try to change it dynamically.
View 1 RepliesSetting variables. Have a look at the file. Current height and width are both set at 200. I dont think i got the scripting right, or it may be in the wrong place.
View 4 RepliesHow do you change the TAB order of text input boxes. I want to tell it what box to go to next depending on which one it is on now making a login form ..
View 2 Replieshow do you change the TAB order of text input boxes i want to tell it what box to go to next depending on which one it is on now making a login form ..
View 2 RepliesI am willing to use Macromedia Flash this year to make my physics project. Well, its going to be force resultant calculator. for ones dont know how it gets counted.
Well, I'll make 4 input text boxes, and a button in the middle. 1 text boxin the north, (power effect the body from the north) one on the south, one on the east and one on the west.(I've done that part).
Then, ill need it to subtract the north - south and east - west on(release), and display that on a dynamic box called Fx (east - west) and another called FY (north - south) Finally, I'll need it fethagorth the Fx and FY to give me the final force resultant. I've done the 4 input boxes and a button, I'll still need someone gimme the action script for subtraction and fethagorth (or atleast teach me how to do it).
I want to be able to add the sum of 3 input text boxes and have the total be displayed in another text box. figure I set a variable and do something along the lines of: Number = "_root.input1 + _root.input2 + _root.input3";Or do I have to do this another way?Also where should I put the code? In a button? Or can I stick it in the frame to save complications of users clicking on a button.
View 5 RepliesWhat is auto-kern, and why has it stopped me from using vars in my input text boxes?
View 3 RepliesI've had a site running for a few months that takes fourinput text boxes (name, e-mail, subject and message) and posts thevalues to an ASP page which composes an e-mail with a CDO.Messagecommand. For some reason (nothing has been changed in the files or onthe server), it stopped working and I've traced it down to Flashpassing Input Text Box Formatting information along WITH theariable.Can anyone explain what's happened and how to correct it?For example, in my form I've set all the name, e-mail andmessage to static text and let the Subject variable be passed andin the e-mail subject line, I get this:
<TEXTFORMAT LEADING="2"><P
ALIGN="JUSTIFY"><FONT FACE="American Typewriter" SIZE="12"
COLOR="#000000" LETTERSPACING="0"
[code]......
I have two questions the first being how could i restrict a text input area to allow it only to recieve entries 1 - 49 I have tried
I1.restrict = "0-9";I1.maxChars = 2;
The second being how could i restrict the inputfields to not allow duplicate numbers?
There are 6 of them as follows:
[Code]...
I am new to writing ActionScript and I'm designing a customer form for my web site. I am using multiple textInput's, Dropdown boxes and check boxes. Here is some of the code I have now for this form: [URL].
Code:
package{
import flash.display.*;
import flash.events.*;
import flash.text.*;
import flash.net.*;
[Code] .....
I'm trying to build a flash keypad that fills in input text boxes when you press a button.I have two input text fields. I can assign each button a number and tell it to display that number in the text field when pressed. for example:
Code:
but1.onPress=function(){
InputText1.text += 1
}
[code]....
I can't seem to get the buttons to fill in the second text field.
I'm trying to do some slightly more complex and strange things with input boxes say you had some writing in an input box and you wanted to find out what characters were before the flashing cursor thing (looks like "|").
View 1 RepliesI'm stumped on this problem and can't seem to figure it out. Any suggestions would be welcomed. Basically I'm building a large calculator that adds over 100 input boxes. I've got it working except for the fact that if a user misses inputing a number into one of the input boxes it does not work anymore. I've tired lots of things to no avail. I just want to add the input boxes and skip those where the user did not enter any information (does not apply to them)
Here is my code.
on (press){
ReceptionTotal = Number(LocationFee) + Number(Caterer) + Number(ToastingGlasses) + Number(SecurityFee) + Number(BarPackage) + Number(WeddingCake) + Number(FoodHors) + Number(Baker) + Number(BartentingFee) + Number(CakeKnife) + Number(Servers) + Number(Flatware) + Number(Dinnerwear) + Number(Flatware) + Number(TableLinens) + Number(ChairsCovers) + Number(Glasswear) + Number(Tent) + Number(Napkins) + Number(Childcare) + Number(DanceFloor) + Number(ServingStaff) + Number(Lanterns) + Number(Heaters) + Number(Restrooms);
}
each input box has a variable name assigned to it as indicated above. I've tired setting the variables to 0, tried if statements don't know how to skip one of the above variables when no number is entered.
I have two .swf flash 5 movies and on one of them it has two input boxes which for the sake of easyness we'll call....
Inputbox1
Inputbox2
Is there any way that on another .swf file i can recall what the user put in any of the Inputboxes and then if they entered "something" then it would go to a frame.
I have a few textAreas (input fields) in a form.When I click on the Tab key, the focus shifts to the textArea. And along with this, a green outline comes around the textArea... How can I avoid the textArea outline color? I guess there must be a piece of AS out there which would help, it's just I did not find it and Official Docs won't say much about it.it does not happen so if compiled the movie under AS 1.0. It only has this behaviour when published with AS 2.0 (and perhaps AS 3.0 donno).
View 8 RepliesI have to make a thingie whereby when u enter values into 2 input txt boxes an image modifies its scale and alpha accordingly. Now I have done everything I am supposed to but the funny thing is NOTHING happens. I'll post the code (I applied it to the button which I think is right)...
on (release, keyPress "<Enter>") {
if (_root.scale>100) {
gotoAndPlay(1);
[Code]....
I created a funky mail form and i can't seem to send the info from the input boxes in my flash file... to the PHP script, stuff it into an email, and then send back a success or error response. I am attaching the FLA and PHP files as well as the external .as files that are needed for the FLA's effects to work. [URL]
View 1 RepliesI have an issue with font scaling of a dynamic text box.
Currently i have one input box named input_1 with a variable attached to it named "choc_1".
Also, i have a dynamic text box named dynamic_1 with variable "choc_1".
When the user types something on the input box then the dynamic box changes instantly and displays what the user has written.
auto scale-size the fonts to a smaller size if the user types many letters.
The input_1 box has a 13 character limit. My initial font size is 200, i want to scale down so when the user types 10 letters they fit the box and they don't go out of screen. I want to use one line, so wrap or multiline is not possible.
here's a code that i'm trying to fix but i can't get the dynamic box to change:
[Code].....
I have an issue with font scaling of a dynamic text box.
Currently i have one input box named input_1 with a variable attached to it named "choc_1".
Also, i have a dynamic text box named dynamic_1 with variable "choc_1".
When the user types something on the input box then the dynamic box changes instantly and displays what the user has written.
I've googled a lot, but i can't find a solution to auto scale-size the fonts to a smaller size if the user types many letters.
The input_1 box has a 13 character limit. My initial font size is 200, i want to scale down so when the user types 10 letters they fit the box and they don't go out of screen. I want to use one line, so wrap or multiline is not possible.
here's a code that i'm trying to fix but i can't get the dynamic box to change:
[Code]....
I'm trying to extend the text input that comes in flex to support an icon, just like mac os x search text input has a grey circle aligned to the right, the text input has a addChild method, but it didn't work for me.
View 2 Repliesthe last of many problems, is that at the very end of the test, you're shown your score, and you have the option to type your name in a text box and click "save". Doing so will apply you score data (time elapsed, date, correct answers and percentage) along with the name you typed in, and output in a form, that you can save or print off, or whatever. The problem is, the input text box will not let you type in it. If you mouse over it, the mouse stays a pointer, you don't get the text tool. If you click on it, the cursor appears for a split second after you release the mouse button, but you cannot type anything in it.This is the actionscript for the output form:
Code:
//
function saveRecord(record:String, field:String, now:Object, score:Object):Void {
[code]......
