Does anyone know why I would be getting this I am at a lost as to whats happening.. the xml file loads fine locally, but it will not load when i upload it to the server... then when i go directly to the link above, i see what you will see when you click on it...heres what the xml file contains
<music autoPlay="true" autoNextSong="true">
<song>
<title><![CDATA[On The Floor feat. Pitbull - JLo]]></title>
[code]........
I'm trying to use ASP.NET to retrieve data from the sql server, place in inside an xml and sends the xml to flash to display the data.
However, I'm getting
TypeError: Error #1088: The markup in the document following the root element must be well-formed.
at news_fla::mainTimeline/loaded()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
[Code]...
it works. But i dont wan a .xml file residing in the server. so i hope that the .xml file would be cleared off as soon as the request is done. Did i do something wrong?PS: I don't know if i post this in the correct section but since it's related to AS3, thats why i post it here. sorry if i made a mistake.
I'm using flex 4 to build a program and I am getting this error on one module I call. Does this refer to the module document (.mxml) or the actually xml file the module it calling?
View 2 RepliesI experienced the following error when loading xml using AS3. I searched the whole internet for solutions but nothing works! But after trying for hours, i somehow solve it. All I did was to remove "</xml>" from my xml.
TypeError: Error #1088: The markup in the document following the root element must be well-formed.
at toffees_fla::MainTimeline/onLoaded()
at flash.events::EventDispatcher/dispatchEventFunction()
[code]...
I am reading attempting to load XML from a ByteArray as follows:
[Code]...
When I do that, I receive the following runtime error on the XML constructor when I run in Flash Player 9: TypeError: Error #1088: The markup in the document following the root element must be well-formed. This error message doesn't occur in Flash Player 10. I can use the debugger to verify that the XML looks well-formed. The XML is in UTF-8.
i went through the ActionScript 3 XML Basics tutorial and had no problems initially.i get the following AS error in them:[code]and if i look at the raw XML from the source (URL...) and run w3c validator on it, everything's valid. but if i take the traced output of the xml from within flash and validate it i get similar errors about malformed xml. here's what the xml looks like inside of flash:[code] URL...
View 4 RepliesThe company I work for installed FMS on a server running Centos for a customer who needed streaming media capabilities. It worked fine for 3 months until today the customer called us and informed us that their client program can no longer connect to the streaming media server. No one has done anything to the server to cause this to happen. When attempting to access the admin console to diagnose the program, the streaming server returned a 500 Internal Server Error. So I tried another page. Same result. Reboots of both the hardware server and the FMS have changed nothing.
View 5 RepliesDear community, i am searching for 6 days for a solution but i couldnt find. I installed the trial version of Adobe Media Server 4.5. I am trying to host live stream and it is working without error. but when i activate protection (PHDS), server gives en error code: 20...
Here is the server log...
After i could take the Live HDS, i made these settings as described at [url]
My application.xml and event.xml files are:
im using FMS4 as origin server and connect to FVSS from CDN, whose FVSS version's FMS3.5. with this all, when it's played with flashplayer from CDN every each connect require just wrote sth in the server log file as below:
Mon 09:51:56 AM: Assert failed in .TCMsgHandler.cpp line 70Mon 09:51:56 AM: Assert failed in .TCMsgHandler.cpp line 70Mon 09:51:56 AM: Assert failed in .TCMsgHandler.cpp line 70Mon 09:51:56 AM: Connect : rtmp://live.mywebsite.com:1935/2011/monitor/
and due to these frequent errors the CDN Edge service would get shuted down. but after i changed the FMS4 into FMS3.5 with origin server everything just worked well.Now my question is, is that a bug with FMS4 or? and what can be done so far if we want to go on use FMS4?
Some users are unable to access any of our video content, getting a Server Not Found error.We have our FMS configured to use ports 1935, 433, 80. Our firewall is allowing RTMP traffic to each of these ports. Is there something more I can do from my end to make sure users can access our FMS?
View 1 RepliesI am using the NetStream class with FMS to record the audio stream from the client's microphone to the FMS server.So far so good, the stream gets saved to the server as a .flv file. A php script grabs this file via ftp and copies it to the user's file store.What we need now is to either record the stream directly as .mp3 OR convert the recorded .flv to a .mp3 file - and this is where it gets interesting.
POSSIBLE SOLUTION 1 (preferred solution), Recording stream directly as .mp3:refer to Actionscipt Reference for Flash CS4:
The documentation suggests that it should be possible to directly record the audio stream as a .mp3 file. NOTE: this is with the new version, Flash CS4.I have tried this with both an Influxis account and with FMS 3.5 dev on my local machine. Both return this error:
Error #2044: Unhandled NetStatusEvent:. level=error,code=NetStream.Publish.BadName
When I publish and record just as .flv it all works fine on both servers.Is this a mistake in the documentation,
I am trying to set up DVR streaming using FLME. I'm following this tutorial: http:[url]........I'm up to Step 2,
I put in the following information into the FLME:
FMS URL: rtmp://222.222.222.222/dvrcast_origin
Stream: mp4:sample.f4v
Then click 'Connect' , but I get an error "Failure to connect to primary server verify that your server URL and application name are valid and that your internet connection is working and retry". My server is a 32-bit windows 2007 VPS , with FMS running.I don't know if I set up the DVR Cast application correct. All I did was copy the dvrcast_origin into the installationdirectory/applications, then I started a new instance of dvrcast_origin with _definst_...Also, I am running the trial version of FMS, and DVR needs FMIS. Is there a way I can just run FMIS?
We are recording live streams on a Flash Media Interactive Server 3.5.3 r824. In general, everything works fine, so there are no appliaction-issues. But sometimes (it is not reproducable yet) a stream stops recording without any notice or event in the application. All we can find is such a message in our core.log: 2010-03-05 03:30:00 4747 (e)2611178 Error from libmp4.so: No Space left in the stsd box. - 2010-03-05 03:30:00 4747 (e)2611423 Failed to record [...]16891_14351_RGtBCODxPR4cM8QfML9CuxqhHqutMwWX.f4v (Unknown Error). where i could start searching for the cause of this error? These streams are in general sent by Adobe Media Live Encoder.
View 4 RepliesI have an application that connects to a binary socket server running on port 2234. I use the python policy file server, which I downloaded from [URL], which runs on port 843. If the client app is trying to connect to a socket I can see that the server is receivng the request for a policy file and that it sends it to the client. However, in the client, I get a security sandbox error. How is this possible? And is it possible to check whether the client really received the policy file? BTW, here is my policy file:
<?xml version="1.0"?><!DOCTYPE cross-domain-policy SYSTEM "/xml/dtds/cross-domain-policy.dtd"><cross-domain-policy><allow-access-from domain="*" to-ports="*" /></cross-domain-policy>
When trying to use the latest AMI on AWS for Flash Media Server, everything seems to work right going upstream (server connects, stream goes to server), but the F4M file doesn't seem to make any client or OMFS happy. I get the following error - "The F4M document contains errors. Error #1009".
View 6 RepliesI try to establich the connection with asc file from applications/videochat $connection_string="rtmp://videochat/"; And I'm getting the result from media server
Connecting to the video server...>>The client does not have permission to connect to the application, or the application expected different parameters from those that were passed.>>The connection was closed successfully
We have a very simple webcam recording/playback application we're using in a mission-critical user assessment application.Users are given the ability to record themselves using their webcam and microphone, then review their recording and submit it for graded review.The recording application appears multiple times per HTML page, and while we can record and play back video, we have large numbers of instances in our core.log of the following error
Server detected a backward timestamp from [####]to [####] in file: [filePath]
While these videos will play back with varying degrees of reliability, they will often "hang" for several seconds at the end of playback before sending the appropriate NetStream.Play.Stop and NetStream.Buffer.Empty events, and will sometimes hang indefinitely.Further, they report inaccurate runtime metadata, causing our playback indicator and progress/scrub bar to function erratically.In any case, the functionality and user experience of the recording tool is substantially degraded and must be fixed in order to successfully deploy this tool.
Disabling NTP services is not an option, and further does not appear to be the culprit, as these errors occur on a large number of recordings.As recordings need to be immediately available for self-review before submission, running flvcheck on each recording is also not an option.We have tried a variety of fixes, including waiting to unpublish until the buffer is empty,reconnecting after every recording, forcing FMS not to reuse connections, and using separate NetStream objects for recording and playback.Nothing has eliminated these errors.Adobe support referred us to Tier 2 support, and I am in the process of contacting them, but I'm looking to exhaust all my options before continuing.Is there any reliable solution to the backwards timestamp recording issue, or do we need to find a different media server application for our needs?
I'm trying to streamline my error reporting for internal testing. When I use URLLoader/URLRequest to load a page that responds with the 500 HTTP status code, I catch it with the IOErrorEvent.IO_ERROR, but can't find a way to get the response body. Unlike with Event.Complete, loader.data (My URLLoader) is an empty string.
Yes, I can use Fiddler/Firebug to get the actual response, but this would be good to catch intermittent/hard-to-reproduce errors when I don't have these running.
I have HTML file, I changed its extension to .XML.I'd like to convert HTML tags to valid XML document using AS3.
View 6 Repliesfunction Function() {}Error #2044: Unhandled AsyncErrorEvent:. text=Error #2095: flash.net.NetConnection was unable to invoke callback onBWDone. error=ReferenceError: Error #1069: Property onBWDone not found on flash.net.NetConnection and there is no default value. at MinCam()
[Code]...
I just met a piece of error log when I was trying to resume the paused mp4 streaming. Here is the log from the server:
[INFO] [NioProcessor-1]
org.red5.io.mp4.impl.MP4Reader - Frame
position was not found for timestamp:
92000
I'm using Red5 newest 0.9.1 final for mac os x to stream the H.264/AAC encoded MP4 file to my flash app.
And there's no problem when I'm resuming the .flv file.
which everything seems fine, but when i implement a slider on a page inside a folder in the root (i.e. aboutus/index.aspx) i get that error when the slider is trying to call the images.I have similar slider animations in pages located in the root folder and in those i get no problem at all, seems it only happens when the page is located inside a folder.The website is done using main.master on asp, maybe the cache or rendering of the website is missing something, hope someone has had something similar or know how to get around this.
View 2 RepliesI am developing application for recording the video in mp4 format with h.264 codec and I am able to record video in mp4 format with h.264 codec, but when I am compiling the Swf by "CTRL+Enter" at that time I am facing error "VerifyError: Error #1014: Class flash.media::H264VideoStreamSettings could not be found" and when I am publishing Swf by "ALT+Shift+F12" then I am not facing any error,what step I need to do for removing the error.
View 3 RepliesI have a swf file "website.swf" on my desktop computer, in the www directory of my wamp server. The website loads the swf file fine.I have one textbox that i want to be able to load all the different contents of my site depending on the page, and in the same directory, I have all the different txt files (i.e. news.txt about.txt portfolio.txt etc)Now, when I'm running the swf file in Flash CS5, it makes me allow it and then works fine. However, once I publish and put it on the server, and then go to the website it returns "Error 2048". I've tried doing the crossdomain.xml suggestions to no avail.
View 5 RepliesI have this error in my output screen, what it means?
Error #2044: Unhandled IOErrorEvent:. text=Error #2032: Stream Error.
at soundboard_fla::MainTimeline/frame40()
at flash.display::MovieClip/gotoAndStop()
[code].....
What I am trying to do is open a database in async mode and get some data from my database. To do I wrote this code down below:
[Code]...
My startstmt is a global SqlStatement variable. When I tested in Sqlite Manager it works fine this query but in adobe-air i am getting this error. Where did i do wrong and how can I solve this?
I have a site that plays either .mp3 or .flv files depending on what is selected from the menu. Menu loads in from xml. I get "unable to make connection with server or unable to find flv on server" when I try to play the video. But the video and audio files are all in the same directory and the mp3 files play fine. I think I'm having a problem with the setMedia command. Here's the code that loads the video and audio files.
[Code]...
We have two servers - one stores the media files and runs FMS. The other creates dynamic webpages. I have edited the 'dynamic stream' SMIL example on the media server, to include a full URL:
[code]...
If I open the standard FMS index page, the 'dynamic stream' example works fine. However, if I copy that code over to a page on my webpage server (linking back to the media server of course), I get a 'connection error'. The weird part though is that if I limit the 'switches' in the SMIL file to just one video, it works again, eg:
[code]...
It makes no difference which file I choose, as long as there is just one.I am using the same video player that all the examples use (FMS 3.5), so my thought is that something in that player is causing a cross domain security exception when it has more than one stream to choose from. I tried disabling the firewall, so it's not that, and I updated server.xml to point to a custom crossdomain.xml file:
<?xml version="1.0"?><!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd"><cross-domain-policy><allow-access-from domain="*.mywebpageserver.com" /></cross-domain-policy>
But that doesn't seem to have had any effect.
I'm trying to stream my webcam to my FMS Server, using AS3, but I get this error message:
[Code]...
I'm new in FMS Recently, i create an application to record videos from my camera and recorded it But, when i tried to play it in an HTML, i met errors. The .flv jumps to the end when the progress is in the middle.And i tried to play in an .exe, it plays well.
View 5 Replies