Flash :: Use The Code Found In The OSM Framework In Flex?
Aug 10, 2010Are there any examples on how to use the code found in the OSM framework in Flex? I would also need the player to be skinnable .
View 1 RepliesAre there any examples on how to use the code found in the OSM framework in Flex? I would also need the player to be skinnable .
View 1 Replieswhat's the size of the bootstrap code for cairngorm framework which is based on flex?
View 1 RepliesDoes anyone know how to recompile Adobe Flex 4 framework RSLs?
I'm using the compiler directive -dump-config to get the build config file that the FlashBuilder IDE is using for compiling my application. I then pass that config file into the mxmlc compiler so I can build from the command-line. The results of the command-line build are output to a folder other than bin-debug. bin-debug is a localtrust path, and it will an application will run from there without error. A Flash application in any other path requires configuring the Flash Player to trust that path OR that the compile be done with the -use-network=false directive. I prefer latter since I'll be distributing the results to lay users for evaluation, and I don't want to request that they modify Flash Player security settings.
The build config file doesn't specify that framework RSLs be rebuilt using the -use-network false directive. FlashBuilder itself doesn't even compile framework RSLs. It merely copies RSL swfs from the framework directory into the bin-debug. Those swfs apparently were compiled by Adobe with the default -use-network=true.
I am trying to use parsley framework in my flex application. Messaging System is one of the best feature that I see while using parsley, But I had a doubt, Does using Parsley framework in your application means that
[Code]....
I'm looking to create a Flash Map with multiple zoom levels. Ideally what I'd like is to be able to click onto a 'state' area, and then have the map zoom down to a sub-area (which can then either have a link or zoom down to yet another sub-area). Ideally I would like to be able to define sub-areas recursively (e.g. state area, region area, town area etc.) on an infinite level, but 2 levels should suffice. I found several solutions on Flash Den, however they can only handle 1 level. Does anyone know of any Flex/Flash libraries or frameworks which are capable of doing this? Alternately, does anyone know if this would be possible with Google Maps/KML? I already have vector outlines of the areas I would like to use in Flash.
View 2 RepliesI am trying to figure out how I can implement the new Text Layout Framework 2.0 in Flash CS5. There are some Flex and FlashBuilder4 examples, but nothing relating to Flash CS5. How do I update my Flash CS5 to support TLF2.
I am particularly interested in creating new List/Bullets features so some example code for Flash would be great.
[URL]
Is there any opensourse, free set of components for creating Flex mxml graphs? like aviary Peacock style ones with at least Drag, drop, and connect generators so each graph element could have or something like that. Framework should be opensource (like GPL, LGPL etc) BTW: I found one wary bacic made by Erno Aapa with Degrafa but I would really love to see something much more Flex 4 - mxml oriented and frienfdly.
View 2 RepliesI'm developing a web application (client in Flash Builder 4, server in Eclipse 3.6 + Tomcat 7 + Spring 3 Framework). How do I make the Flex client automatically deploy in the Tomcat server and use BlazeDS messaging and remoting more seamlessly?
View 14 RepliesI have been seeing some Flex Frameworks, but would like to ask to the programmers and Architects down here on which has suited best in your application.
View 3 RepliesPossible to use the flex 4 framework within an Air app.
View 1 RepliesI have a rather large Flex SWF and am breaking it up into separate Modules. There is some overlap between the modules and I want to put all of this into one shared RSL. The problem is that this RSL gets really large as soon as I use any Flex code because it has to include the Flex Library.Flex Builder doesn't seem to give me the option to use the Flex framework RSL in a library. Also compiling with compc and passing the runtime-shared-library-path doesn't seem to actually use the rsl.So it seems like this is something that is unsupported? Does anyone have any idea how I can do this? Is it just not possible? Is this something that is likely to be supported in the future or already supported in Gumbo?
View 1 RepliesWarning 1106: Empty statement found where block of code should be expected. Did you type ';' accidentally? Here is the code:
Code: Select allif (MapCombo.selectedItem == "Westfield London Ground Floor")
{
function MapChoice(event:MouseEvent):void{[code]......
I am looking a game framework for flex/AS3. I want to use it to create simple 2d games, such as tower defense, etc.
View 4 RepliesI'm currently developing a Spring + Flex app. What is the best Flex framework to use? I've been using PureMVC...
View 1 RepliesI just upgraded from Flash Builder 4 to 4.5 and have imported one of my FB 4 projects.I am now seeing an orange question mark in the gutter next to all of my import statements that are importing local classes (as well as everywhere the said class methods are used) and an orange underline appears under the import statement.When I hover over the underline it says that the import could not be found.
The project compiles and runs without a problem (I use ANT to build this project).If I open one of the class files in question then change something (i.e press space bar) and hit save (EDIT: actually found I don't have to even save, just opening causes FB to find it) then go back to the file importing it the orange question mark is gone for that import, I get the code assist and CTL+Click links me to the class file. However, if I close that file and reopen it again cannot find the class file.The classes in question are stored under my project's src dir as:
- src
+---com
+---myappname[code]........
Is this a FB 4.5 "enhancement"? I've tried deleting and re-importing the project, refreshing the project and am now kind of at a loss of what to do. It's annoying enough that I may need to downgrade to 4.
I have an actionscript project in Flash Builder and get 1172 errors on these lines:
import flash.filesystem.File;
import flash.filesystem.FileMode;
import flash.filesystem.FileStream;
[code]....
I am using FlashDevelop to develop flex applications and wanted to paint a LineChart in a panel. I used an example of Adobe itself to be found here. When I compiled it FlashDevelop showed the following output file type was not found or was not a compile-time constantFor Both LineChart and AreaChart.Can someone tell me why this happens? I also tried it in the code by importing mx.charts.LineChart, my code completion found the classes but when compiling the same error occurs.
View 2 RepliesIs there a framework for Flex that uses the Qt Signal and Slots paradigm?I'm getting tired of these event-mapped frameworks.
View 2 RepliesI'm developing an AIR application with Flash Builder 4 Beta 2 (nightly SDK) an am not using a framework like mate. I have a couple of views and components in my application. An outline might look like this:
root
|- mainview
|-- toolbar
[code].....
I was reading these days about large projects implementation in python and Flex, and very often people praise the use of framework (like Cairngorm, PureMVC or others) over traditional OOP coding.
I think i dont really understand the advantage of using FW, which is the strong point over classic programming? how big should be the project in order to use FW? it is intended mainly for web-applications? or can be used for desktop apps as well?
What is the use to event extend the cairngorm event in cairngorm framework.?
View 1 RepliesWe're working to build the front-end of our application and struggling with selecting a good UI framework since we're not experienced UI people (we're mainly back-end developers). The central issue is that we don't know what we don't know and don't know how to best weigh our different options.At the moment, we're evaluating Flex, ExtJS, and Vaadin. Is there another option we should consider? What, are the major elements we should evalutate on?
View 8 RepliesI am trying to build a pure as3 project in flex and I got the following error:
type was not found or was not a compile-time constant: Button
type was not found or was not a compile-time constant: TextField
[Code]....
I'm attempting to create a Flex Project that will cause the Flash Player to cache the Flex framework. Flex Builder comes with Flex SDK 3.2.0.3958 and setting the Framework Linkage to use Runtime shared Library (RSL) under Project Properties -> Flex Build Path will separate the framework from my main application and I see that my project's bin-debug directory contains framework_3.2.0.3958.swf and *.swz for distribution.Flex SDK 3.4 fixes a few bugs, so I configured it as another available sdk and set it as the default SDK. When I compile, I expect the bin-debug directory to contain framework_3.4.0.9271.swf and *.swz; however, Flex Builder is still writing framework_3.2.0.3958.swf and *.swz.
View 2 RepliesI am successfully running Bluetooth-SPP applications relying on http://bluecove.org/ that is Java to Java.
I do now want to establish Bluetooth-connectivity in an Adobe Flex-application. Anyone has experience, ideas?
I have a grid, when i click on the edit button it goes to edit page... but i need the value in the grid also to be passed to the page. this.dispatchEvent(new DepManagementEvent(DepManagementEvent.EDIT_NAVI));The above code lands in EDIT page... how can i move the values too.My Parent Page code.
private function editForm():void {
var event:DepManagementEvent = new DepManagementEvent("Edit Page",true);
dispatchEvent(event);
[code]......
I have to make an ultra quickstart on this framework, since I have to dive into an existing project ASAP.
View 5 RepliesWe have a Flex application which doesn't currently use the Flex framework as an RSL. We're considering switching, but we're not sure what proportion of users will already have the framework cached.There's an added complication in that we're using the data visualisation components too, and we may have a choice as to which version of the framework we use.
View 2 RepliesIn ACE Flex 3 , there is a topic "Handle Framework Events". Any document which lists all the 'required' framework events for ACE test? So I could know what are "framework" events and will focus on them.
View 1 Repliesi have a question about Zend Framework and mainly the model part. I know there is no abstract model class and understand why. I red a lot of blog posts about it, but couldn't find any example that would clearly explain it to me. I'm building a very basic application. Lets imagine we have just three tables.company(ID, name, street, streetNo, Town), meta(ID, name, description), company2meta(ID, companyID, metaID, value, note). All types of realtionship are there (1n n1, nm). The a need also services (amf) with Value Objects. So, here is what I think:
[Code]...