Any thoughts as to why this works correctly in CS5 publish preview but when I publish it I either get no action or (XP comupter) or a blank page (vista) Any thoughts or insight would be appreciated. Also, I'm new to flash and here's the button action:
on (release) { //create the LoadVars that will hold our paypal information var paypal = new LoadVars();
I have a TileList of image thumbnails that pulls its image location and caption info from a remote XML file. when you click on a thumb it displays a larger image and changes when you click another image. it works perfectly inside Flash, but when i publish the images, xml, and swf, everything works except the thumbs do not display, and clicking an empty cell doesn't bring up the larger image. i first thought that maybe my xml file was in the wrong place, but since i am still getting 12 empty cells (12 images listed in the xml), i'm questioning whether its my xml code or my as3 code. getting no errors from flash because the entire swf functions as intended locally.
my xml file and images folder reside in the same folder as the swf on my website.
I have a flash project that I have been working on for a while, today its stopped functioning properly. To be clear. It still runs JUST FINE when I preview it (CTRL+ENTER), but when I publish the file and run the SWF file, or the HTML file the movie no longer functions properly. Specifically any ActionScript from the main timeline seems to no longer be functioning. ActionScript contained within movie clips continues to function properly, but nothing else.There is about 400 lines of code right now (variables, functions etc.)
Basically I have a 2 swf files. Within the main swf i have a button that I want to call in a second swf when it is clicked. The code I have for this looks as below..
Btn_interiors.addEventListener(MouseEvent.CLICK,lo adGallery); function loadGallery(event:MouseEvent):void{ var l = new Loader(); addChild(l); l.load(new URLRequest("portfolio_interiors.swf")); }
The problem I am having is that when I enter the code and "Check Syntax" no errors appear, however when I preview the published swf and click the button, i get the following message....Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
To me this would seem to say that the swf I am trying to call in is not in the appropriate folder, but both of the files are in the same folder.
i made a simple nav bar with a dropdown menu it works fine in flash mode and preview but when i try to embed into html it only show the nav bar but not the dropdown menu.
I am writing to a text file via FileStream, and it writes just fine when I do a publish preview (control + Enter), but when I publish it as a projector and run the exe, it does not work.
My publish settings are set to Player: Adobe AIR 1.5 Script: ActionScript 3.0
I have tried to develop my first flash project using Actionscript 3.0. When I "Publish Preview" (HTML - Default, Flash and HTML) in Flash CS5 Pro, the project seems to work just fine. However, when I actually publish the project the html with the swf file does not display correctly. The flash file is suppose to show a video with a video control skin (play, pause etc.) beneath the video. On the video I have tried to embed a button at the bottom of the display that, when clicked, takes the user to a webpage.
The flash file is suppose to look like the one at: [URL]. This is just an image of the "Publish Preview" output. What I get with the published html and swf file is at: [URL]. Just the button displays??? My fla file is at: [URL]
I have simple navigation code setup to step through frames (I'm using Flash instead PowerPoint--too many pictures that are PSDs and illustrations that are AIs to do the conversions over to something PowerPoint understands).[code]When I test it using the debug (Ctrl+Shift+Enter) it works fine.When I publish it, the up and down arrows work but the Home and End keys do not work.They do nothing, no error messages, nothing.Using Flash CS4 Pro 10.0.2 ActionScript 3. Windows 7 64-bit.
I'm using a different domain to host the swf file. The different domain is a media server to take the load off our own server and ISP. Actually, we have 2 different media server URLs. One each for development and production. I'm pretty sure the problem is a security issue in the flash. When I take the media server URL out of the file paths everything works. Although I have a crossdomain.xml with the media server urls included, I don't think it's permitting the request.
I learned a few years ago on Actionscript 2 and I'm finding Actionscript 3 very confusing. I figured out (through much searching) how to write up a working (in theory) hyperlink script. When I open it up in preview mode, the link goes through (very slowly and doesn't come up in my default browser, but it works). When I try to work the link in Internet Explorer or Chrome (haven't tried firefox) nothing happens.
So I continue to build my fractal animator, I'm already done with the spinning part, and it works well when I preview but when I publish, the images do not rotate at all. I am using an external class is that has anything to do with it.
I have created a rollover image in fireworks, which works in the preview option on fireworks.I have exported it as : html & images, exporting slices.This works when I open it straight from the file BUT when I try pasting it into dreamweaver (insert -> image: fireworks html) the box where the rollover image appears but with a cross in it.I have also tried copying the html from fireworks into dreamweaver but this doesn't work.When I try this the image appears and the link works BUT the rollover doesn't?This is the code I use:
I have a few words written in static text mode which I have made a graphic symbol. On the timeline I have used both motion tween and classic tween to create a aplha change from 0% to 100%.I made sure I have enoough space on my timeline (10 frames).The aplha tween works fine in preview mode however when I export the swf the aplha tween is no longer working? I have tried breaking the text,restarting flash,restarting my computer and similar suggestions from other blogs such as:
I was able to solve this by checking the box "Use runtime bitmap caching" under Blend in the properties panel for the MovieClip in question.I am currently using Flash CS5 on a imac.
I am new at flash CS4. (Upgraded to Flash CS 5 but this gives other problems in the meantime I continue with CS4)I have created webpage. Within the web page I have created Motion Tween with Motion editor and once previewed, it works fine. Going back to the stage and previewing the result shows the initial position of the Motion tween but it doesn't move and behave the way it shoud. What's missing? Where am I going wrong?
I've been creating this banner: [url removed] which accesses an xml document, replaces some texts etc, but as soon as you open it up in a browser (like with the dropbox link I pasted) the banner only loops on the first movie clip. Put in another way: The banner you see is looping through only the first movie clip. But the swf file (and the html file) work fine from the local path of my computer.
I made a flash mp3 player and it works fine in any other test pages. but when i embed it onto my site it just shows blank. what do i do? my site is [URL] and the flash player i tested here [URL] and it plays. What im i doing wrong? i tryed everything. right now i just got it in a iframe but i dont want that iframe.
I have a project where I have a main project which loads external .swfs, and those external .swfs in turn load more external .swfs. In my main project, everything works perfectly when I preview using simulate download, but once the .swf is published it doesn't work properly. I'm assuming is has something to do with my main site Preloader, that's why I posted here. I'm pasting the code here and attaching the latest size report.
I'm having some trouble with getURL (I think). It works fine when I preview with Flash's html preview but it's not working on my server. It's pretty simple. [URL].selected1 is a user-defined variable pointing to a page: ie, when the user selects variable page1 the page to be opened is [URL]. Like I said, it works with Flash's preview, but not on my server(no 404 or any response). Does there seem to be a problem with my code or might I be overlooking a server error? Here's my code:
I am creating a simple flash animation in Flash CS5 of a hip hop group, where when you mouseover their picture, their name pops up over their head.
I made each image a button and created the frames for up, over, down, and just a black rectangle for the hit area.
The problem I have is that in Flash when I have simple buttons enabled, it works fine and flawlessly, but when I publish it the hit area is sketchy and doesn't always react when moused over.
The Flash file that I've attached plays very slow on my other, older computers. It plays fine on mine, but these older computers play other flash files (i.e adobe.com) fine. I want to know if I'm missing something here as to how making this play efficiently. I understand that I am using photographs - rasterized images - but, is it really supposed to take that much power to play it?
I have been using CS4 for about a week, getting used to it from CS3. I just noticed that I published a file in Flash Player 10 and do not see an AC Run file in the folder yet the swf displays.I uploaded to my server and it still display?
This is not actually an AS3 question, but as many users has done it before, I have discussed it here and I hope that I can receive a good solution. I have made a webpage with Flash AS3 and published it in HTML. What can I do to fit it on any screen with any resolution? My page is 800x600 and I would like to have it fit to screen in both dimensions (x and y) or in one dimention on any screen. I prefer not to stretch it on screen.By stretching, the images will be deformed and I don't want it.
I received a flash file of a slider to change out one of the photos. I was able to change the photo but the published file won't show any of images. Here is the link to the file Test.fla .
It uses two greensock classes as well (included) which weren't included when the client sent the file over so I had to find and download it myself. It outputs "-440.6 1" which is over my head.
Here is the AS.
Code: import gs.TweenMax; import gs.easing.*; var randomNum = Math.floor(Math.random()*3);
I am working on an image management application. We have an Adobe AIR client talking to a WAMP server. The MySQL DB stores the images as blobs.We have an image search feature. Upon searching, I am displaying the results as XMLList in a popup window and provided a download button. Downloads work fine. I also want to add a preview button to the popup.how can I code this. Without having the file on the client, I cannot preview. But when I use save() method, the os dialog opens up.
I'd like to make a bandwidth saving mp3 preview button... instead of clicking on the button and that the stuff loads an mp3 file on the server (legally of course) it just takes a part of it, like 10 seconds or more...
I have made an animation, when i veiwed it as a preveiw in flash CS4 it works fine.So I published it as both a HTML fie and SWF.The HTML file runs perfectly fine, but the SWF file is missing almost all of the illustrations and the play button at the begining, the sounds all work fine however.
I am trying to publish a flash file onto a website but once I post it there it keeps looping. How do I get it so that it doesn't loop? I have a feeling it's a setting in Flash that I have to find before I publish it but I don't know where it would be or if there even is one.