ActionScript 3.0 :: Fit To Screen Of Published File In Html?
Sep 14, 2011
This is not actually an AS3 question, but as many users has done it before, I have discussed it here and I hope that I can receive a good solution. I have made a webpage with Flash AS3 and published it in HTML. What can I do to fit it on any screen with any resolution? My page is 800x600 and I would like to have it fit to screen in both dimensions (x and y) or in one dimention on any screen. I prefer not to stretch it on screen.By stretching, the images will be deformed and I don't want it.
View 2 Replies
Similar Posts:
Jun 24, 2010
I have made an animation, when i veiwed it as a preveiw in flash CS4 it works fine.So I published it as both a HTML fie and SWF.The HTML file runs perfectly fine, but the SWF file is missing almost all of the illustrations and the play button at the begining, the sounds all work fine however.
View 1 Replies
Oct 26, 2009
Can't figure it out. I've got a video file to stream from my published Flash file. Works great at home.All the files are in a single folder. I transfer the folder to a jump drive to bring it to school and when I load it up on the website I get this green/black filer on the play skin andthe video won't play. I double check to see if I can play it on my school machinestraight off the jump drive and it doesn't work either (it did on my home machine).
View 8 Replies
Feb 28, 2012
I created a flash file that contains a flv file inside. After I published it on my Mac in both html and swf format and it played well. But when I copied all this folder include the swf, html and the source flv to test on a pc it played well but the video part (flv) was blank. So I copied the .fla file to pc and published again, then it works fine (including the flv video part) on both pc and Mac. All the settings were same while publishing.So I wonder what's wrong with publish from Mac side? I work with Mac and so it's very inconvenient to publish my work on PC.
View 5 Replies
Sep 30, 2010
I'm trying to read flashvars into my flash file by modifying the standard HTML published out of Flash CS5. The following isn't working:[code]
View 2 Replies
Sep 2, 2009
ive publish a html file with flash detection enabled from flash.[code]now since the default codes places my flash movie on upper left corner, ive made my own tables with the flash on it, how or where do i place this code to the upper codes?[code]
View 1 Replies
May 12, 2009
I just published a short movie from Flash CS4 and placed the entire set of files at this URL[URL] and when my web designer or me for that matter double clicks on the HTML file the movie doesn't play. We get a black screen and at the bottom of the frame in the progress bar there's a little green & white zebra like moving line. I'm pretty sure this is how I've delivered movies from CS3. I'm obviously missing something obvious here, but I haven't a clue. If I double click on the HTML file on my machine that has Flash installed it works great. The .FLV file plays correctly in media player also.
View 7 Replies
Oct 12, 2009
I created a complex fixed line and a bird flying on the line using tweens from point A to B to C. When I view the birdline in play or by scrubbing across them in the layers mode, the bird follows the line just as designed. When I test the birdline in "test Scene" or "test movie" one bird flies from point A to C, then another bird appears at point B and flies the course to point C. The published .swf and .html do the same as the test functions. What can I do to get the published version to behave the same as the design?
View 9 Replies
Jul 30, 2010
Mu published FLASH html files will not scroll when minimized. I tried changing the publishing setting to pixels but that doesn't work.
View 11 Replies
Dec 15, 2009
I have learned how to listen and handle SWFAddress events in this video tutorial by Lee Brimelow:[URL]The html file he learns how to write doesn't display my Flash site as I wanted to be displayed. In IE the swf is a little square, in Firefox it doesn't display anything, etc.I have posted below the HTML that Flash CS4 has published for me. I have added the lines to include the swfobject and swfaddress javascript files. The address does change when I click something but the back and forward buttons (browser buttons) don't change the pages inside the swf movie.Lee Brimelow's HTML file (with my changes in the name of the swf):
HTML Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<head>
<meta http-equiv="Content-type" content="text/html; charset=utf-8">
[code].....
View 1 Replies
Apr 17, 2007
when iam trying to publish an flash project containing a dynamic xml menu as html file ,the menu is not showing although it is showing in the accompannying swf file,any body knows the problem??
View 1 Replies
Jun 9, 2010
I am using actionscript 3.0. My externally loaded swf are not showing after I published HTML or if I try to view my final swf by clicking on it in my project folder. I am not sure what to do because everything is working fine when I have my .fla open and press ctrl enter to view my work.
var defaultSWF:URLRequest = new URLRequest("myswf.swf");var loader:Loader = new Loader();
loader.load(defaultSWF);
loader.x=Xpos;loader.y=Ypos;addChild(loader);
// Btns functionfunction btnClick(event:MouseEvent):void {
[Code] .....
View 2 Replies
Aug 19, 2010
Is there a way to permamantly have HTML tags when a fla is published to swf & html?
e.g. (codes to center the swf, meta name, keywords, etc...)
View 1 Replies
Jan 25, 2011
My flash design crashes! I published everytime I finished few steps. First few publications in html/ swf were okay, but after a few new steps the things all went wrong: the button went missing, the whole did not stop at frame1 as in my action script, some of the images went missing. I then deleted new steps hoping to get the thing back to normal, but it remained. After every futile effort I did (restarted pc, republished, saved as...), I suspected that there are BUGS whether in flash or in my pc, I did an experiment by simply creating a new layer and inserting an image in the layer, I published, and this time all the images has gone!
View 1 Replies
Jun 16, 2010
I am running Windows 7/64 and Master Collection. I've created a clip of DV NTSC footage to test F4V publishing. Done this many times with CS3 and flv files but this has me stumped. I can successfully view the video and web page locally in IE and Netscape but on upload to my server I have the menu and placement right but no video appears. I created the clip in Premiere Pro CS5 and exported to F4V/FLV best quality. Opened an Actionscript Media DV NTSC template in Flash Pro CS5 and imported the video which I had pre-placed in my root web folder locally. I then exported the swf and saved the fla. All files were then in my root folder and the scrpts in the scripts folder. In Live View in Dreamweaver CS5 all looked fine. In each browser locally the video played as expected. Once all files were uploaded the video was not visible.
[Code]...
View 5 Replies
Aug 6, 2007
How can i open a Microsoft Excel or Word using flash which is published as HTML, We have way to open these when Flash Stand alone EXE
View 1 Replies
Dec 22, 2010
So I published my Flash Movie using the HTML settings of Match Movie Size, rather than Fit To Screen (fit to percent, I believe it is) under the publish settings options. This way it works great, but there is no scrollbar on the browser. So my stage size is pretty big, lets pretend its 1200x1200 lol. So, now I want every monitor in the world to be able to see the entire page. I do not want it to fit to their screen, but I want them to be able to scroll down using their browsers scrollbar rather than a scrollbar within the SWF itself.
So imagine you are on a 15 inch monitor, and you are browsing my 1200x1200 HTML page, calling the SWF. You need to be able to scroll down to see the bottom, and scroll right to see the right side. Why is the browser scrollbar not appearing? Is there anything I must do?
View 3 Replies
Oct 12, 2009
everyone out there that is smarter than me. I have made this little prototype video player, and it isn't working. It'll eventually become a nice little player show videos from our summer camp for the last few years, but first I want to make it work in a basic stripped down version. There is a playback component with one of the skins right above the three buttons.
Here's the ActionScript: btn1.addEventListener(MouseEvent.CLICK, vid1);btn2.addEventListener(MouseEvent.CLICK, vid2);btn3.addEventListener(MouseEvent.CLICK, vid3);
function vid1(e:Event):void{vidPlayer.source = "Video1.flv"};function vid2(e:Event):void{vidPlayer.source = "Video2.flv"}; function vid3(e:Event):void{vidPlayer.source = "Video3.flv"};
It runs fine when I test in in flash and even the .swf file runs fine alone, but when I put it in a .html file via Dreamweaver and in the published .html it doesn't run. What up?
View 1 Replies
Apr 19, 2011
I've looked high and low for an answer to this and I'm hoping someone has an answer, or at least a tip on how to avoid it.I'm loading a static HTML file into a container via the jQuery load() method. This static HTML file has a script which loads a swf. When I load that particular file, I get the white screen of death (WSOD) and the page explodes and everyone in the room dies a horrible death.I've had this happen also when using the jQuery wrap methods (wrap, wrapOuter, etc.) when a swf is present.It seems manipulating the DOM with a container that has a swf object causes this. Does anyone have a solution or a way that I can prevent it happening?
View 1 Replies
Sep 7, 2009
The Flash file that I've attached plays very slow on my other, older computers. It plays fine on mine, but these older computers play other flash files (i.e adobe.com) fine. I want to know if I'm missing something here as to how making this play efficiently. I understand that I am using photographs - rasterized images - but, is it really supposed to take that much power to play it?
View 1 Replies
Jan 8, 2010
I have been using CS4 for about a week, getting used to it from CS3. I just noticed that I published a file in Flash Player 10 and do not see an AC Run file in the folder yet the swf displays.I uploaded to my server and it still display?
View 4 Replies
Jun 17, 2011
the ActionScript 3.0 code snippet that redirects the user to the original web site if the swf is downloaded and loaded on someone else's web site?
View 2 Replies
Apr 5, 2011
I received a flash file of a slider to change out one of the photos. I was able to change the photo but the published file won't show any of images. Here is the link to the file Test.fla .
It uses two greensock classes as well (included) which weren't included when the client sent the file over so I had to find and download it myself. It outputs "-440.6 1" which is over my head.
Here is the AS.
Code:
import gs.TweenMax;
import gs.easing.*;
var randomNum = Math.floor(Math.random()*3);
[Code].....
View 1 Replies
Mar 12, 2011
I am trying to publish a flash file onto a website but once I post it there it keeps looping. How do I get it so that it doesn't loop? I have a feeling it's a setting in Flash that I have to find before I publish it but I don't know where it would be or if there even is one.
View 3 Replies
Feb 8, 2012
I have a strange issue with flash.
I have created a dynamic user interface which pulls urls from an xml file.
Heres the structure
Main movie
care_btn movie
action script for main movie is as follows
links_xml = new XML();
links_xml.ignoreWhite = true;
[Code]....
View 7 Replies
Sep 26, 2011
I was reading about Flex- JavaScript communication via ExternalInterface.But I had a doubt, it said that the javascript code should be written in the HTML file of the application ? Now which is this HTML file ? Is it the index.template.html file per project or the HTML file created per MXML application ?
View 3 Replies
Nov 11, 2009
I made a flash mp3 player and it works fine in any other test pages. but when i embed it onto my site it just shows blank. what do i do? my site is [URL] and the flash player i tested here [URL] and it plays. What im i doing wrong? i tryed everything. right now i just got it in a iframe but i dont want that iframe.
View 1 Replies
Feb 14, 2011
I have a problem with the following code:[code]The problem is that the code is working when I test the scene (ctr+alt+enter in flash), but after I publish it it doesn't work... not sending any request nor redirect.What I want to do is to log in a file on the server what the users typed (related with Related with: Flash actionscript - save a text file on server).
View 1 Replies
Mar 6, 2011
I am having a nightmare using CSS to style HTML within a dynamic textfield in my flash doc. From what i now understand after much trial and error and reading online, CSS doesn't even work properly in flash even for the tags that it does understand (which are few and far between anyway). For some reason my layout is getting completely screwed up in certain scenarios (predominantly when there are images present too) when i hover over links (which are styled in an external CSS file). If i remove the external CSS styling (which only contains the following simple code):
a:link {text-decoration: none;}
a:active {text-decoration: none;}
a:visited {text-decoration: none;}[code]....
Then everything works fine (but no links are underlined as standard or on hover). Does anyone know of any way to style the links without using an external CSS file (all i want to do is have no underline as standard and then underline them on hover). As this is from user input into a text editor I cannot place these links manually on the page in flash as they could be anywhere, I need a way of parsing the HTML and then displaying it accordingly.
View 1 Replies
Feb 11, 2009
My question is what needs to be done in order to make a .swf file go into full screen without falling to a black screen when a movie is played? I have tried coding it, however I come up with the following error.
[Code]....
What should I do to fix this? This is not going to be an HTML file, however, so the initial thought of changing the publish settings does not seem to work this time.
View 9 Replies
