I'm trying to read flashvars into my flash file by modifying the standard HTML published out of Flash CS5. The following isn't working:[code]
View 2 RepliesIs there a way to permamantly have HTML tags when a fla is published to swf & html?
e.g. (codes to center the swf, meta name, keywords, etc...)
I created a flash file that contains a flv file inside. After I published it on my Mac in both html and swf format and it played well. But when I copied all this folder include the swf, html and the source flv to test on a pc it played well but the video part (flv) was blank. So I copied the .fla file to pc and published again, then it works fine (including the flv video part) on both pc and Mac. All the settings were same while publishing.So I wonder what's wrong with publish from Mac side? I work with Mac and so it's very inconvenient to publish my work on PC.
View 5 Repliesive publish a html file with flash detection enabled from flash.[code]now since the default codes places my flash movie on upper left corner, ive made my own tables with the flash on it, how or where do i place this code to the upper codes?[code]
View 1 RepliesThis is not actually an AS3 question, but as many users has done it before, I have discussed it here and I hope that I can receive a good solution. I have made a webpage with Flash AS3 and published it in HTML. What can I do to fit it on any screen with any resolution? My page is 800x600 and I would like to have it fit to screen in both dimensions (x and y) or in one dimention on any screen. I prefer not to stretch it on screen.By stretching, the images will be deformed and I don't want it.
View 2 RepliesI have made an animation, when i veiwed it as a preveiw in flash CS4 it works fine.So I published it as both a HTML fie and SWF.The HTML file runs perfectly fine, but the SWF file is missing almost all of the illustrations and the play button at the begining, the sounds all work fine however.
View 1 RepliesCan't figure it out. I've got a video file to stream from my published Flash file. Works great at home.All the files are in a single folder. I transfer the folder to a jump drive to bring it to school and when I load it up on the website I get this green/black filer on the play skin andthe video won't play. I double check to see if I can play it on my school machinestraight off the jump drive and it doesn't work either (it did on my home machine).
View 8 RepliesI m passing variable/ file name in html/ php like this
[Code]...
This is the AS3 code that calling xml file. I want to call this xml from html of this flash with flash var.
init();
function init():void {
initXML("load/1.xml");
}
[Code].....
and is flash being replaced by another standard like html 5 completely?
View 5 RepliesI had published the Flash project which resulted in the creation of a HTML file. I previewed what the web page would look like by opening the HTML file in a browser. The first obvious issue was that the page was not centered, but left-justified. I think that I know how to satisfy that issue by reading the HTML file into Dreamweaver and adding a <center> tag just below the <body> tag. The issue that I cannot figure out is that my page is a bit smaller than my monitor size, so there is naturally the white "fill" areas to the margins. Is there a way to change this color to black? Is that the bgcolor variable that is in the <body> tag?
View 1 RepliesI want to read in a HTML file and format with a CSS file.I'm using MX2004.From what I've read, this should be possible?I'm getting stuck at the first obstacle, I can't figure out how to read in the HTML file.THe use of the CSS styling seems to be straight forward.
View 1 RepliesI created a complex fixed line and a bird flying on the line using tweens from point A to B to C. When I view the birdline in play or by scrubbing across them in the layers mode, the bird follows the line just as designed. When I test the birdline in "test Scene" or "test movie" one bird flies from point A to C, then another bird appears at point B and flies the course to point C. The published .swf and .html do the same as the test functions. What can I do to get the published version to behave the same as the design?
View 9 RepliesI have learned how to listen and handle SWFAddress events in this video tutorial by Lee Brimelow:[URL]The html file he learns how to write doesn't display my Flash site as I wanted to be displayed. In IE the swf is a little square, in Firefox it doesn't display anything, etc.I have posted below the HTML that Flash CS4 has published for me. I have added the lines to include the swfobject and swfaddress javascript files. The address does change when I click something but the back and forward buttons (browser buttons) don't change the pages inside the swf movie.Lee Brimelow's HTML file (with my changes in the name of the swf):
HTML Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<head>
<meta http-equiv="Content-type" content="text/html; charset=utf-8">
[code].....
I've read many solutions on the board about displaying correctly your Flash emmbed site in way to fit the browser screen of your visitors. I've tryied also many suggestions, and I can't get it right. I need to have my work look like this site [URL] The main flash movie used is 1200 x 626. I've copied the index.html and adjust for [URL] The main flash movie used is 1200 x 600. As you can see, the result is different, the site doesn't fits the screen, and that's what is getting me crazy,
View 2 RepliesI think this is almost impossible, or at least very difficult. The thing is: I wanted to make a guestbook on my site (inside flash) but my server doesn't allow me to use php. So the only other way (I think) is to use a remote script-host. So that's what I did, I found one on scripthost.com. It's a very simple one,it just changes a html-file everytime a new entry is entered. What I want to do now is to extract all the things that are in the html-file and put them in textboxes. Is this possible? I searched a little bit and I found that I could use the server side include tags to read a html-file to another html-file (inside a div) and then use javascript to read the div and send it to a textbox in flash.
View 3 RepliesMy flash design crashes! I published everytime I finished few steps. First few publications in html/ swf were okay, but after a few new steps the things all went wrong: the button went missing, the whole did not stop at frame1 as in my action script, some of the images went missing. I then deleted new steps hoping to get the thing back to normal, but it remained. After every futile effort I did (restarted pc, republished, saved as...), I suspected that there are BUGS whether in flash or in my pc, I did an experiment by simply creating a new layer and inserting an image in the layer, I published, and this time all the images has gone!
View 1 Replieshow to be able to create another node which would be a text box just like the caption text seen in the tutorial but could be used to display a url.I tried adding it in but having problems getting it to read the html code that gets loaded from the xml file.heres what the actionscript looks like:
Code:
Key.removeListener(listen);
function loadXML(loaded) {[code]...
How can i open a Microsoft Excel or Word using flash which is published as HTML, We have way to open these when Flash Stand alone EXE
View 1 RepliesI need to retrieve a value in as3 from a html page on a particular event say "mouse-click".We cannot use flashVars as it is obvious that i need the value on a particular event
View 2 RepliesI tried many Flash .swf before and they all can be scaled freely -- by using a width and height in the HTML, and sometimes in the URL params or flashvars. But is it true that all Flash object can be scaled? For example, can some Flash objects using absolute coordinates to plot graph so that every 10 pixels it marks 1, 2, 3, 4, 5, and no matter what is done at the HTML or any where else, it just won't scale and the browser can't do anything about it either? Is there a way to scale it to half the size for that graph? (that is, 1, 2, 3, 4, 5 is separated by 5 pixels instead of 10 pixels)
View 1 RepliesI have a Flash projector file which I would like to edit with Resource Hacker. I would simply like to change a few of the menu bar items (see below):
Does anyone know if this is legal and will not hinder my ability to freely redistribute the file?
I have a problem with flashvars , when I read the url from browser if I have assigned just numbers to Id (my paramter in url) ,everything works fine, but if my id includes character, then it does not work , I don't want to change anything in flash side in mxml files, I want to do it with javascript
here is my code
<script type="text/javascript">
function getQueryVariable(variable)
{
[Code]....
A friend of mine has a Flash Action script running on a LAMP server that currently reads an xml config file. He's asked me if it's possible to remove the xml file, and replace it somehow with a system (lets call it an 'auto xml generator') that intercepts the request to read that file and generates an output, so it appears to all intents and purposes as if the file still exists and contains the contents that has actually been returned from our auto xml generator'
View 3 RepliesI am working on creating a Flash menu that, depending on the page calling the swf file, will show a specific frame just for that page. It works almost perfectly except for the very first time you access the swf during a given browser session. If you refresh the browser window, it will start working just fine after that as long as you stay in that same window.Incidentally, this is only for IE. It won't work at all in Firefox. It pulls the first set of frames, which is a template menu for one of the departments.The HTML code providing the variables:
*********************START HTML CODE*******************************
<script language="JavaScript" type="text/javascript"> AC_FL_RunContent( 'codebase', 'http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve rsion=10,0,0,0', 'width', '150', 'height', '500', 'src', 'flash/ucfshsunitmenu', 'quality', 'high', 'pluginspage', 'http://www.adobe.com/go/getflashplayer', 'align', 'middle', 'play', 'true', 'loop', 'true', 'scale', 'showall', 'wmode', 'window', 'devicefont', 'false', 'id', 'flash/ucfshsunitmenu', 'bgcolor', '#000000', 'name', 'flash/ucfshsunitmenu',
[code]....
I heard an absurd argument that they thought that Flash would overtake standard html/css coding of a website.
View 1 RepliesWe need to convert the sound file in (.dss Format i.e Digital Speech Standard),in flash
View 2 RepliesI have been using CS4 for about a week, getting used to it from CS3. I just noticed that I published a file in Flash Player 10 and do not see an AC Run file in the folder yet the swf displays.I uploaded to my server and it still display?
View 4 RepliesI am trying to publish a flash file onto a website but once I post it there it keeps looping. How do I get it so that it doesn't loop? I have a feeling it's a setting in Flash that I have to find before I publish it but I don't know where it would be or if there even is one.
View 3 RepliesI just published a short movie from Flash CS4 and placed the entire set of files at this URL[URL] and when my web designer or me for that matter double clicks on the HTML file the movie doesn't play. We get a black screen and at the bottom of the frame in the progress bar there's a little green & white zebra like moving line. I'm pretty sure this is how I've delivered movies from CS3. I'm obviously missing something obvious here, but I haven't a clue. If I double click on the HTML file on my machine that has Flash installed it works great. The .FLV file plays correctly in media player also.
View 7 Replies