I have an input textfield nested inside a movieclip, i embedded a set of characters but when i run the movie i can still input characters that were not part of the embedding list. The input text field has both an instance name and variable name. If i copy that text field into an empty fla file, it works correctly by not allowing character inputs that were not embedded.
View 1 RepliesThere is an attribute .restrict but as the defined it only prevents other characters from entering the textfield, restricting the textfield to the given characters. I want to prevent characters 1-10 from entering the textfield. The code below does not work the right way.
txt.border = true; //
function down(event:KeyboardEvent):void
{
/*
[Code]....
Whenever I have my Textfield focused and enter a character, the input field enters an additional duplicate character, meaning I have to backspace one character for every character I enter.If it was a Keydown problem the same should happen when i backspace a character as well.
View 2 Repliesi have a movieclip and inside this movieclip i have a textfield the text field has anti-alias for animation and characters embedded. the movieclip undergo - scaleX,scaleY & alpha changes. is this the cause of the jagged/pixelate texts or am i missing something important to make it look great?
View 7 Repliesit is possible to count the words being entered to an input TextField?
View 1 RepliesI'm trying to create an input box which is restricted to one character wide and six lines - a total of six characters - which appears like this[code]...
View 3 RepliesIn order to use a pixel font in my textfields, I have created a font class in the Flash IDE. Then, I created a TextField instance with the font embedded with the anti aliasing set to bitmap. I export an SWC with all those things.I created a class with a nice API to be able to deal with this stuff easily.In FDT, I use class and this all works properly.
The issue here is that I now want to use one of these textfields as an input. I tried setting the textfield type to TextFieldType.INPUT, however the only thing that this does is allow me to select the text, I cannot type. I also created another asset with the type already set to input, does not work either.I tried with just the asset, not with my class, and then I can type ok.Is there something that prevents a textfield from being editable once it is part of a sprite? Here is the code of my class with the API:
package net.jansensan.as3fflikeui.text
{
// + ----------------------------------------
// [ IMPORTS ]
[code]....
i would just like to ask why is the case that when i use embedfonts = true on a textfield, the textfield's text only resizes according to the textfield's height but not the textfield's width. meaning if i make the textfield's height bigger, the text also gets bigger in terms of height, but not width, can't the embedded font maintain aspect ratio according to the textfield height?
I'm only wondering about this because this is not the case when embedfonts= false
I've imported a font as a font symbol. In its linkage I selected export for actionscript.This works for my dynamic text. However I've noticed that not all characters are embedded.See attached example.On top I've got a static textfield with the following text:â–ª Some text with a square in front of itAt the bottom a dynamic textfield with the following code:
Code:
mytext.html = true;
mytext.embedFonts = true;
[code].......
What easiest way to place cursor (focus?) into an textfield input box for receiving user input after an event?
View 1 Repliesin this site we of course need to to display non-latin characters like etc.we decided to go for the Minion Font (on Mac) because it includes all possible Glyphs.no i embedded the font on the library and used it via menuitem_font =new Minion()but the special characters are still not displayed.also when i do trace(menuitem_font.hasGlyph)i get "false"
View 3 RepliesSince I only need numbers, can I limit dynamically embedded fonts to only numerals, periods, dashes and special characters copied from the character map?
View 5 RepliesHow do you verify if a variable contains a specific set of characters. Let's say: my_var="My name is Peter and I like apples";
How do I test if my_var contains de word "Peter"?
My issue is thus: If I use an embedded unicode font in a textfield and set embedFonts = true when displaying characters like mandarin or IPA phonetic spelling characters, certain characters will disapear from the textfield.
[Code]....
is there a way to embed certain characters instead of embedded the entire font package which would increase my file size tremendously. I tried creating a textbox and type in the characters I need in hopes that would embed those characters but that didn't work.
View 1 RepliesFor this project I'm working on currently I've had to create a Font Symbol and select 'Bold' in order for the 'Bolded Font' to display in my dynamic text box.I'm just wondering, is there a way to only select uppercase A - Z to be embeded with the Font Symbol, rather than the whole font?Note I had to create the font symbol as this is the only way to attach the 'bolded' version - Else I would be using the 'Embed Font' button and selecting which characters I wanted.
View 3 RepliesHave an Input textfield and write e.g. 123 in it (This is on frame 1).Then later in frame 3 I want that number to be shown in a Dynamic textfield.How do I do that?
View 0 RepliesI have a form for signing up for a email newsletter, requesting name, phone number, email, etc. However, for some reason, it won't allow me to enter "3" "4" or the "@" symbol in any of the textfields. You can see how that could be a problem.I'm working with a preexisting site, build by someone else. The SWF on the site doesn't have this problem, (it works fine) but when I create a new SWF from the FLA they got from the previous designer, I have these problems, even before I made any changes.
The site was built with something newer than Flash 8 (I couldn't open it with Flash 8), but older than CS5 (when I save a new version of the FLA, it tells me it will no longer be compatible with older versions of Flash) Could this be caused by that?
the code from the form:
Code:
stop ();
this.tabEnabled;
name.tabIndex = 1;
street.tabIndex = 2;
[code]....
If I load a txt file into my flash movie using the following...
var myTextLoader:URLLoader = new URLLoader();
myTextLoader.addEventListener(Event.COMPLETE, onLoaded);
function onLoaded(e:Event):void {
[Code]....
I get my text imported and it splits it every time the letter 'a' is found. That's fine.
How would I go about counting the number of times that 'a' or 'and' (for example) featured in the text?
When embedding fonts programmatically, (example here), is it possible to specify certain characters as you might if embedding within the Flash IDE?Here is my code so far, which simply embeds the font. It works, but I am assuming that it is embedding an entire character set.
Code:
package
{
import flash.display.MovieClip;
import flash.text.AntiAliasType;
[code]....
I am working on a login system and would like to hid the password text entry.Also, can someone provide some insight into how you "remember" a person (login info). Nike does it here. URl...
View 3 RepliesdrawPanel is a movieclip which contains 23 textfields which I've created in the lib. 23 textfields has their instance name.. var1, var2.. etc... I need to ref dynamically to the textfields to input the characters. I see people using getDefinitionByName however can't get that to work.
[Code]...
I have a input text field, where people can type text in, limited to a maximum set of characters. And, instead of just putting a text under this textfield saying 'max. 50 characters', I want to have a countdown that counts down (wow, some descriptions really do speak for themselves) from 50 (the maximum of input characters) to 0, in accordance of the characters in the textfield.
View 1 RepliesIs there any way? I thought "maxChars" was promising until I learned it was only for inputting text to a textfield.The XML is coming into a dynamic text box. I need to cut it off at say 500 characters and add an ellipsis.
View 2 RepliesI have an embedded font in my AIR/AS3 app that lacks support for most internationalcharacters. Using TextField and StyleSheet with the font-family property, I assumed I would simply need to do this:font-family: Interstate-Regular, _sans;This works if TextField.embedFonts = false; but then Interstate-Regular isn't embedded for users that don't have it on their system. With TextField.embedFonts = true; the text doesn't even show up. Is there a way to embed Interstate-Regular and still use _sans as a fallback system font without embedding it as well?
View 1 RepliesSo I have an input text and let's say the user inputs "Hello" in it.Then I want to calculate the total value of what is entered in a fashion like H=4, e=2, l=3, o=6. Meaning the total value of the entered characters would be 18 in this case.
View 6 RepliesI already know how to limit my input text to a number of characters, but how would I go about (if possible) making sure characters do not repeat? In other words, I have a ten character input text box and I want you to be able to type pretty much any character but only one of each.
Example:
AFKEIOPCNK
What I'm trying to eliminate is this:
AANHDKDDJI
If that isn't possible, I'd like to instead detect if there are repeated characters so I can just say "that's invalid".
I am working on an application that allows user to copy and paste content into a text field. The problem I'm running across is that when the user paste something with a tab in it, the tab is not shown in the text field.[code]...
View 1 RepliesI basically need to store a string of characters from an input text box and have them displayed at the last frame of the quiz. I declared the variable holding the input text as _global.player in the first frame, and upon clicking the start button the code is:
on (release) { _global.player=player.text; gotoAndStop (2); }
These variables are not referenced again until the last frame of the quiz, which reads thus:
stop();playerdisplay.text=_global.player;score.text=_global.correct;'Endng Comments Generator'if (_global.correct<=3) { phrase="Try a little harder next time";}if (_global.correct>3 + _global.correct<7) { }comment.text=phrase;
Yes, I know the global.correct coments are not yet complete, but i dont think that should be causing any issue with the playerdisplay.text (the dynamic text box to display the player name). If anyone could give me a hand that would be great. Nothing appears in the dynamic text box when the final frame of the movie loads.
I have an input text field with embedded fonts together with embedded special characters. I published my app on MAC, when I use my app on mac - all is fine all special characters are displayed correctly - but when I test it on Windows - special characters do not appear or I get wrong characters when I type. I'm confused - becase I have embedded fonts etc - and all should work but for some reason it does't...
View 0 Replies