I want to place my duplicates about one third down from the top and in a small bit from the left. Roughly centre them on stage. My code so far:
for (var i = 1; i <= 6; i++){ duplicateMovieClip ("fish_mc", "fish_mc" + i, i); _root["fish_mc" + i]._x = 500 * Math.random (); _root["fish_mc" + i]._y = 350 * Math.random ();}
I want to load some mcs randomly on the stage, except for a footer area at the bottom of the stage. Is there a way to exclude just a certain part of the stage using something like Math.random()*Stage and then specifying the bottom 300 pixels as off limits?
I'm using the whole stage because the swf is embedded 100% across the browser, so I can't restrict the dimensions.
Code:
onClipEvent (load) {
x = this._x=Math.random()*Stage.width;
y = this._y=Math.random()*Stage.height;
}
how can i duplicate a movie clip and then place it on a certain place on the stage
View 5 RepliesI've used .x = and .y = with the position I want and the pane continues to show up in the top left corner instead. What am I doing wrong?
View 2 RepliesI'm making a scroller that scrolls movieclip (text inside). It works quite good but I want to put the final touch on it. I want that my scrollbar is dynamic in its size (just as browser scrolls or windows scrolls). Then my biggest programming problem comes up, maths
The values that I have is
- How tall is the area there the text shows.
- How tall is the movieclip that the text is shown in
- How tall is the place there my scrollbar is shown.
I'm making a mockup for a client and I need to Load the .swf with the exact stage size so the graphic elements do not float outside the loaded movies stage area. [URL]Basic load code I'm using...
Actionscript Code:
import flash.display.*;var adLoader1:Loader = new Loader();adLoader1.load(new URLRequest("100828_budlight_texas_fight_728x90_jn.swf"));adLoader1.x = 313;adLoader1.y = 162;addChild(adLoader1);var adLoader3:Loader = new Loader();adLoader3.load(new URLRequest("100828_budlight_texas_fight_300x615_jn.swf"));adLoader3.x = 738;adLoader3.y = 0;addChild(adLoader3);
I've been working on my new flash site for a few weeks, along with learning AS3, tackling problems as I encounter them and I've learned a lot...but sometimes the simplest things I cannot figure out for the life of me.
All I am trying to do is have some flash banner SWF files I created play within the portfolio page of my site. I don't want them to open in a pop up or anything just play within the page when the link on my site is clicked. I figured it would act like a movie clip and I could just drop it onto the stage, but when I do that it doesn't look right, loops continuously, and is not interactive.
Is it possible to place a PDF onto the stage and add it to the display list? Are there plugins out there that can accomplish this?
View 3 RepliesIn this .swf where can I place the stage color? I am using the[url].... and it made the stage color black? Which is suppose to be #999 .HERE IS THE CODE SCRIPT:
<object width="600" height="409"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=http%3A%2F%2Fgfdesignwise.com%2Fjbm_sit e%2Fvideo%2Fsplash.swf&controlBarMode=none&playBut [code].....
if i make say a button in my timeline, convert it to a button. and then remove it from the stage (it is still in the library) in my exeternal .as file how can i then place that movieclip on the stage? i know how to do this within the timeline, but not when it is an external .as file.
View 7 RepliesThe player controls the character with their mouse - it follows their cursor. I'm trying to make an environment continually scroll from the right hand side of the screen to the left - much like in Canabalt (click to see). I've been trying to do this with tweens, but it doesn't seem like it's going to be the most efficient way of doing it... Plus Flash keeps dying on me whenever I try to do it.
I have a couple of background images, and then I have objects in the foreground that the player is going to destroy by mousing the character over them. How do I get Actionscript 3 to place instances of movieclips on the screen at certain points, and make them to scroll from the right of the screen to the left? I have a lot of different movieclips to use, so it'd also be great if they could be removed from the stage once they reach a certain point.
I have made many small swf files for each section of my website. The problem is now I want to club them all together to avoid breaks and showing of the loader at inappropriate moments, I know that was poor planning on my part. I want to know I can place an external swf onto the stage, so that it gets loaded with the main swf. As in, I don't want to call a loadMovie or loadClip
View 1 RepliesI have two artworks on stage which have a common shape within the artwork. I need to make the one I have just added to stage fit the prior one by getting that common shape the same size for both. In Freehand I would drag the junction of the two rulers out onto stage to the left edge of the item, to create a zero point from which to take a measurement. I would drag a guide out to the right edge and read from the info panel an x value, thats my width, or double click the guide to get a reading from the guides palette. Repeat that for the other artwork then get a calculator and divide one measurement by the other to work out the scaling factor I need.
How in CS5 Flash does one place a ruler zero point on stage ? I can drag guides out, but how do I make the left hand guide to be zero ?
I'm trying to dynamically place instances of MovieClip on the stage. Receiving an error:
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/addChild()
ActionScript:
// properties in class ----------
var circle_ary:Array = new Array;
var circ_num:int;//number of circles on the stage.
[code]....
I used below scripts for drawing on stage. but I want draw on specific place of stage not all of them.How can I define that zone ?
ActionScript Code:
this.createEmptyMovieClip("drawing_mc",this.getNextHighestDepth());
this.onMouseDown = function() {[code].....
I just noticed that when you place a text field on the stage using code:
Code:
var texter:TextField = new TextField();
texter.defaultTextFormat = new TextFormat("Impact", 68, 0xffffff);
texter.text = "890";
[code]....
It does not look the same as a text field that I placed on the stage in the Flash editer. The text created by code has very harsh edges, but the other text has smooth edges. How can I get my code TextField to look like the editor Text Field?
Basically I have manually built these MC's onto the stage. I want to delete one of them when an event is complete.
Here is how it looks. Keep in mind it doesn't work at all. I guess the catch is that these MC's are manually placed on stage I get an error msg: 1120 access of undefined property.
Code: Select allMyGallery.Pic1.removeChild(LB);
its built like this
MyGallery.Pic1.LB
How can I choose the right place/ position of a swf on a stage?
View 7 RepliesI've been working on this for over 3 hours and it is about to drive me crazy! I was one of those people who never paid attention to math in high school because i thought i would never use it ( i knew i wanted to be an artist/designer of some sort). But now of course, that attitude is coming back to haunt me. I'm using a for loop to place several objects on stage. I need a formula that will space objects along the x axis evenly, and center all the objects on the stage. Kinda like if you use the align panel in flash to distibute the vertical centers of several objects to the stage, if that makes sense. If there is only one item, it should be directly in the center of the stage. If there are 2, it should place them in the center of the 2 halves of the stage, and so on for howeve many objects there are. I also want a buffer of about 25 pixels on either edge of the stage so that no object is ever on the very edge of the stage. I made a simple diagram to illustrate:
View 5 RepliesI have my flash doc. and I used a mask to give it rounded corners but you can still see the stage color. I am new to flash so I can use the help. How do I get rid of this or can you even do this?
View 2 RepliesJust wondering How I would place the Flex button component on the stage with actionscript and make it execute a function when pressed...this is easy in MXML:
PHP Code:
<mx:Button label="Button" click="function();"/>
but I need to do it with actionscript..
I have a movieclip which is added to the stage every second at a random place.i want all instances of this movieclip to move to the postion x=100px and y=200px on the stage at a rate of 5px.im not sure how to code this, i would like the code to be in as3 if possile as i do not know as2.
View 2 RepliesMy requirement/need is the AS3 code for placing any type of Component(viz., Button, CheckBox, ComboBox, ListBox, radiobutton, Slider, Scrollbar,Label,TextField, etc.,) on the stage with desired width,height, X and Y parameters(values) which we mention in "Properties" tab of Properties Window in flash. Hence, What i need is, (say)a generic ActionScript 3.0 method/function, which places any of the components present in "Components Panel" onto the stage. the function prototype or signature may be like this:
function addComponent(int <width>, int <height>, int <XPos>, int <YPos>)
t is a general query i think so. i.e., A basic programmer's task for defining a function for my requirement.I think,if I want to add a Button onto the stage at 100,100 pixel position and the button component's width and height are 50,50 respectively, (i.e., button.X=button.Y=100 && button.width=button.height=50).So, a button must be placed at 100,100, then, the sample code looks like this:
Button <btn_instance> = new Button(); //creates Button instance
<btn_instance>.addComponent(50,50,100,100);// properties of button.
I have this footer image, that I want to align to the bottom of the stage, however I'm getting errors. As you can see I have an ADDED_TO_STAGE listener in the constructor function.
[Code]...
how could I randomly place x number of rectangles on stage so that they dont overlap?
not tween, just place?
I want to be able to create and place objects on the stage dynamically and remember their location. I'm guessing the best way would be saving the object type and location in an array? Just wondering if there is a better way before I start coding.
View 1 RepliesI am new to flash and ActionScript 3.0.I am learning ActionScript 3.0. My requirement/need is the AS3 code for placing any type of Component(viz., Button, CheckBox, ComboBox, ListBox, radiobutton, Slider, Scrollbar,Label,TextField, etc.,) on the stage with desired width,height, X and Y parameters(values) which we mention in "Properties" tab of Properties Window in flash.
Hence, What I need is, (say)a generic ActionScript 3.0 method/function, which places any of the components present in "Components Panel" onto the stage. i.e., As per my idea, the function prototype or signature may be like this:
function addComponent(int <width>, int <height>, int <XPos>, int <YPos>)
i.e., A basic programmer's task for defining a function for my requirement. I think,if I want to add a Button onto the stage at 100,100 pixel position and the button component's width and height are 50,50 respectively,
(i.e., button.X=button.Y=100 && button.width=button.height=50).
So, a button must be placed at 100,100, then, the sample code looks like this:
Button <btn_instance> = new Button(); //creates Button instance
<btn_instance>.addComponent(50,50,100,100); // properties of button.
For a game where I have a different level on a screen how do I do this? Do I need to erase the stage and place a new level on it or is there a wat to have another stage?
View 5 RepliesI currently have an small animation job that involves an enormous zoom out. To do this I need to scale the symbol containing all the animation out in the main timeline, from extremely close to quite far away.
I have two problems that are preventing me from doing this satisfactorily.
Firstly, the transform panel doesn't work. Specifically, entering scale values only seems to work beween 0 and 100%, anything larger gives unpredictable results.
Second, the symbol has become too large for the work area (I have zoomed out as far as I can go) - how can this area to spread out to the whole of the graphic editing area, instead of the third of it that is on the left side?
For example, I have used the Free Transform tool and scaled the item up 2500%, and now it's too big for the limited work area. To scale it further, or scale it back, I need to enter scale amounts into the Transform panel. After doing this, the figures I enter turn into arbitrary other values and my symbol either warps or disappears entirely.
Ideally, I should be able to look at the stage itself, click on the symbol, scale it in the Transform panel to 3000% and be done with it.
Once again i'm a bit lost XD. The deal is, that i'm making a dynamic "blog like" news viewer, so, when i got more than 2 news (sometimes even with one), all the rest of the news get out of the stage and are not seen.
I have been reading methods about changing the stage size but the question is here, if i manage to change the stage size, all the content will be scaled too, isn't it? That's exactly what i don't want.
then, how do i change the "view area" of the stage.