I've created a flv movie, and I have a button showing that I want to vanish when I press the play button on the flvplayback controller.I searched the web and came up with this:
Code:
// Play Button code
function btnPlayClickHandler(event:MouseEvent){
[code]......
When creating a website in Flash, I have made the buttons but I am unable to add an action to the buttons. A message appears to say 'current selection cannot have actions applied to it'. I have followed the tutorial to the letter without any success - what am i missing?
View 1 RepliesI made some animated buttons, and now I'm trying to assign script to them to link them to their pages, on the script box it says I cannot assign script to them? Is it because they're animated or am I going wrong somewhere else? It's in Flash CS3, I can upload any files as a link if I've not explained myself well enough
View 1 RepliesI am trying to add actions to my buttons i want the user to be sent to another page when the button is clicked. The action i have attached to the button is
on (release) {getURL(www.pharmeng.ie,_self);
}
Attachments:
pharmeng buttons1.swf (7.7 K)
I have rollOver, rollOut, and Release actions on several buttons. I want to be able to keep the same buttons but attach different actions depending on what section of the site the user is in. I have something like:
Code:
myClip.onRollOver = function():Void {
this.swapDepths(5000);
Tweener.addTween(this, {_xscale:110, _yscale:110,
_x:xArray[substring(this,12)] - 10,
_y:yArray[substring(this,12)] - 9,
[Code] .....
I tried just reassigning it and also tried
_root['box'+i].onRollOver = function():Void {null}
before reassigning it. neither worked.
I have lot of buttons (50) is possible to call this buttons in other way or must i use this actions? This is example on 1. frame for 3 buttons. Of course in the future ara buttons different actions
Code:
// action for 1. button
_root.mainMap.map.pan.jewish_point_01.onRollOver = function () {
trace ("jewish_point_01 works!");
mainMap.map.pan.description_01._visible = true;
};
_root.mainMap.map.pan.jewish_point_01.onRollOut = function () {
[Code] .....
Still learning my way around Flash & AS. I'm using CS3 and AS3 for this project: I'm using the FLVPlayback to display 4 videos, each one being called by it's own button (a movie clip) that sits next to the player. This .swf goes into a webpage and works very well. Each button calls the appropriate video and I have no problems.Now, I've been told that "elsewhere" on the page, we need to have those same buttons that call up the 4 videos. In essence, just a copy of those original MC buttons located in a different spot on the webpage (so they cannot be part of the original .swf).With AS3 how do I do this?
View 13 RepliesIs there anyway to add some new custom buttons on a FLVPlayback skin? i already try to put the button, everything fine, add a dispatchEvent with bubbling true,to that button to capture elsewhere in my aplications, the button appear on the skin but can´t get the Event
View 2 RepliesI have just created a flv, and want to control a button on the stage that I placed there.
Basically when a person clicks the play button I want that button to vanish.
//AS BEGINS
var productList:Array = Array("diabeoff", "cholestoff", "inulina", "colageno", "power", "castoff", "dieta", "miel", "extrapower");
[code].......
I have 4 buttons on the stage and each button is correlated to a seperate movieclip.
btn1 - mc1
btn2 - mc2
btn3 - mc3
btn4 - mc4
I want each mc to appear when it's corresponding btn is clicked but it has to be the only mc on the stage...meaning whatever mc was currently has to disappear. I've toyed with numerous was to get this to work but I know there's a more code efficient way to do this than the code I have below. And I don't want to use any timeline.
[Code]....
i had placed buttons on and the Actionscript 2.0 Play,Pause, Ffwd etc and when i test the video the buttons do not function.
View 3 RepliesI have 2 classes that deal with making my menu. One creates a button and the other creates a menu using the buttons. I have XML set up to set the text in each button. What I cannot figure out is the best way to have each button do something different. I do not have much time to complete the site so the way I thought about doing it was giving each of the buttons a name and setting that to what the text was inside the button. All this is happening in my menu class. [code]...
View 2 RepliesI am fairly new to Flash and I am wanting to create a virtual tour through a house. I DON'T want the panoramic views; I want to be able to have the buttons walk the user forward through the house and look side to side. I have successfully made the left, right, and forward buttons look side to side and move forward for one sequence, but once I add multiple "If" scripts for the forward button it messes everything up. Furthermore, when I want the forward button to go back to its screen when on the left screen it doesn't want to seem to work.
All this is to say how do I get a button to do different "if" functions from frame to frame.
The code I currently have looks like this:
stop();
up_btn.onRelease = function() {
if (_root._currentframe == 4) {
[code]....
it seems to mess up the entire button. It will only do the first command in the structure. All of it has been VERY frustrating and I don't know how to structure it so that it will go to the desired frame but also go back to the frame I want when looking left or right.
I have is a movie with a button in it called button.i've duplicated the movie (manually) several times on the stage.the movies have been given instance names of movie1, movie2 etc.i've then used actionscript to assign actions to the buttons.i have the following code:
Code:
for (i = 1; i < 6; i++)
{
[code].....
i'm pulling my hair out over this one. I have is a movie with a button in it called button. i've duplicated the movie (manually) several times on the stage. the movies have been given instance names of movie1, movie2 etc. i've then used actionscript to assign actions to the buttons. i have the following code:
[Code]...
I am working on a Flash file and some of the buttons in the document are not working.When I test the movie the hand cursor appears when I hover over the buttons they don't change colour (as specified in the over state) and the actions don't work. Not sure what is going on here as I created other buttons in the same document the same way and they work fine.
View 3 RepliesI got a set of buttons and a text field where they load the content.I'm trying to not make one zillion functions and keep the code neat so i guessed i would try set the buttons' actions within the loop too. I firstly had some problems getting the i counter inside the onRelease function (actually I don't think i ever got how to do it). But I tried this and worked:
stop();var comprarXML = new XML();comprarXML.ignoreWhite = true;comprarXML.load('flash/comprar.xml');comprarXML.onLoad = checkLoading; function checkLoading(success) { rootNode = comprarXML.firstChild; ButtonReleaseAndContent ();} function ButtonReleaseAndContent (){ for (i=0;i<12;i++){ // my buttons are not generated dynamicly, that why the count. btTemp =
[code]....
At the line where I set the text, I had a though " I may have to refer from within the button mc, since the generated code goes inside it!". So i tried the this.temp , guessing that this would be equal to the button level. A few seconds later i noticed my referencing for the text field wasn't coming from within the button, but from the root.
I am following along this tutorial: [URL]. And I get to the part where I need to add code to get my buttons to work, and I copy and paste the code and then change the frame labels to match mine, but then I get a syntax error:
"About_Project_mc, Layer 'hit area', Frame 1, Line 1
1086: Syntax error: expecting semicolon before leftbrace."
Code for assigning actions for buttons trough out xml
View 2 RepliesI am trying to make a search interface that behaves much like searching in iTunes and Spotlight in that the list is updated instantly as the user types something in the search field. However, I would like the lines that result to be clickable and to fire actions inside flash (as opposed to launching an URL). Is this possible?I've gotten the basics down. Here's what it looks like and here's the source FLA file. The results are displayed as tabbed lines of text in a single text field. Is there any way to make these lines clickable without replacing this way of displaying the results with multiple, duplicated button/mc-intances?
View 6 Repliesim trying to load different flv's into an FLVPlayback component on my stage via buttons.[code]1119: Access of possibly undefined property videoSource through a reference with static type flash.display:SimpleButton.
View 1 RepliesI have a player which I have created with play/pause, rewind,forward buttons, and a progress bar on it. How can I link these buttons to carry out actions on an externally loaded movie?I have searched on the forum and can only find answers for buttons for embedded movies.
View 4 Replieshaving previously made webpages just in html.I have a flash movie and wanted to add a series of links.I've made some buttons, but when I rightclick on them and go to actions, I don't get the 'basic actions>geturl' command that the help screens tell me I should have. I get some other crazy menu with options like 'Global Functions', 'Actionscript 2.0 Classes' etc.how I can bring up the actions menu that will allow me to create a link from my buttons?
View 2 RepliesI keep getting this message in flash cs4 when I try to actions to the my menu buttons
"TypeError: Error #1009: Cannot access a property or method of a null object reference. at Enigma_fla::MainTimeline/frame1()"
[Code]...
Frame 1 on the timeline is empty, so I have no idea what I'm doing wrong.
I was wondering if anyone knew how to hide the skin in the flvplayback component on ROLL_OUT. SkinAutoHide seems to work whenever it feels like it and sometimes the button controls just stay over the video. This happens in Safari and IE I believe. I am used Actionscipt 3.0OR does anyone know how to get to the display list of the component, where all the names to all the buttons (and skin) is housed, using the instance names from the component fla file does not work. I looked at the documentation and the names of all the button sprites are there, but i need the name of the background that the buttons sit on top of.
View 5 RepliesThis code doesn't seem to be working and I am wondering if I am using the if.. else if.. logic incorrectly:
Code:
onEnterFrame = function():Void{
if(this._currentframe > 1946){
_parent.slideTo(slideX[3], slideY[3], 1, "easeInOutQuart");
[Code].....
This code is meant to assist the fast-forward and reverse buttons catch actions that occur on the timeline as they travel along skipping 15 frames at a time, but the actions are not being caught for some reason.
Anyway, I am just trying to figure out movie clips as buttons, and have been following along on however, I seem to be doing these things right, but when i test my movie, the button just loops regardless of rollovers or stop actions.You can check this addressto see the failed anim, and you should be able to import it as well. Here is my coding:
function rollover (e:EVENT){ myBtn.gotoAndPlay ("in");}
myBtn.addEventListener (MouseEvent.MOUSE_OVER, rollover);
function rollout (e:EVENT){ myBtn.gotoAndPlay ("out");}
[code]....
Is there a way to disable/enable the buttons in FLVPlayback component? I got a flv files loaded into a fla file and the swf file then loaded onto the main fla file which where I want to disable/enable the FLVPlayback button at certain time.
View 7 RepliesI have a series of frames one the timeline. Each frame has a graphic and a mouse click leads to the next frame. Think Myst.
[Code]...
When the middle frame is returned to, clicks no longer change anything. I believe that the actions of the 'left' frame are replacing the one's in the middle frame so then it is told to gotoAndStop to itself.
I'd like to know if that is indeed what is happening and how I can make it stop.