ActionScript 2.0 :: Adding New Movie Clips With Dynamic Data
Dec 30, 2011
I'm currently working on the gift cards section of a flash website for Discovery Clothing based out of Illinois. So far I have had success with every function but getting the "Add Another card" feature to work. What I would like to accomplish is displaying the input data from the Flash UI elements in a new Movie Clip to the left and then have them repeat the process to add another card. After which they would hit the 'purchase' button and see two separate items on their PayPal checkout. I was wondering if anyone might know how to do this. You can look at the Gift Cards section for yourself by visiting: [URL] then click on the "Give a Gift" wallet in the center.
View 1 Replies
Similar Posts:
Jan 15, 2009
I have a scrolling image strip that loads images from xml. I was wondering how I could attach a border to the movie clips that the images are loaded into. I know how to use the drawing API, but I can't seem to attach a border to each movie clip. I'm posting the code below.
Code:
cliparray = [];
function loadXML(loaded) {
if (loaded) {
[Code]....
View 1 Replies
Dec 4, 2009
What I am looking to do is add a fire button (added) which for the entire duriation it is held down it fires bullets (functions added), i'm stuck with what codes to use for the bullets.I want to create the bullets at certain points on the x, y axis and use a function to move ALL of the bullets accross the screen at the same speed at the same time.I'm fairly sure I need a Array of the bullets but I do not know how to do this.Also I do not know how to use AS to add clips to the page.I also do not know how to remove the clips from the stage and array once they hit the 'destructor' bar out of the screen area. (I know how to use the hittest in AS3).
View 5 Replies
Jan 31, 2009
I have been looking for a way to swap a movie clips when the user clicks on them.I could not find a function for swapping them, so I dynamically generate the first one, when the user clicks on it, I remove it and add another clip (hoping to repeat the same process), however, when the second one appears it not allow me to click on it - so that I can do the same again.The code is below, and I have attached the flash file for you to take a look at - I am currently working in Flash 8.
Code:
this.attachMovie("MOV_addToBasket","addToBasket_mc",this.getNextHighestDepth());
addToBasket_mc._x = 75
addToBasket_mc._y = 50[code].......
View 4 Replies
Nov 2, 2002
I know that you can do for example onClipEvent(enterFrame) as an action for an exisiting movie clip.How do i dynamically do thisI load the movie:
_root.createEmptyMovieClip("myMovieClip", 101);
myMovieClip._x=50;
myMovieClip._y=50;
[code].....
View 14 Replies
Aug 27, 2008
Using an XML file, I am pulling a series of JPG images from my hard drive onto the stage. Each of these images will need to have different mouse events placed on them that will take the user to another part of the movie, or perhaps to a different scene.
The attached code successfully pulls the images to the stage -- as JPG images -- and spaces them. What i need to do is make each of them a
button or movie clip, each with a specific action (information which can be gleaned from the XML).
Eventually, I'll need to show images from this XML file based on user-selected criteria via some check boxes. And I'll also need to build some kind of "show next 9 images" and "show previous 9 images" functionality.
View 3 Replies
Jun 5, 2009
How do you add several similar movie clips to the stage from the Document Class?
E.g. I've got four different movie clips called ball0_mc up to ball3_mc.
Also, how do I add each movie clip to random points within the stage parameters?
View 1 Replies
Jan 5, 2009
OK so I am dynamically adding and removing movie clips to the stage.[code]I want to be able to add that same MC from the library again later with a button press but when I try to use the same code to add the same MC (this.attachMovie("controll_pannel","controll_panne lMC",10);[code]
View 4 Replies
Aug 4, 2009
How to add random movie clip onMouse Move to stage from many (lets say 50) different movie clips in library? If I wanted to add one movie clip to stage I would do liko so:
ActionScript Code:
stage.addEventListener(MouseEvent.MOUSE_MOVE, onMove);
function onMove(e:MouseEvent):void {
var mc:MovieClip = new Ball();
View 0 Replies
Dec 17, 2009
I have an XML file, I read the data and want to add it to a List and then use the List to be displayed.
Something like this is what I want to do:
List data = new ArrayList();
data.add(item1);
data.add(item2);
How can I do this, also how will I display the List in a table!!
View 2 Replies
Jan 28, 2009
I am trying to load data into 3 different movie clips. (content_mc, content2_mc and content3_mc). Each movieclip will get one image and two bits of text (picture, who and bios <== instance names)
Those 3 movieclips are inside of another movieclip, contentHold. That movieclip is setup to scroll vertically ( I was able to do that myself ).
SO my problem is I have that I can't figure out how to load the data into the 3 movieclips as I want to.
I have attached my .fla and .xml file from the project.
View 3 Replies
Feb 8, 2010
Im having a hard time putting in my head on how would i go at making flash read a xml file (this part I have it going smooth) and then fromt hat elements put on the stage a sprite or a movieclip that is interactive.
To make it clear I want to load and display an image that when you press it it just creates another square beneath it with some text. I believe I have to interate the xml and then use each of the elements with a class and gettin that object onto the stage.
Im using flash builder and as3 and im looking just for pointing in the rigth direction,
View 1 Replies
Sep 18, 2009
I'm attempting to create a movie where 100 different facts are faded in and out sequentially. The text will need to be updated monthly so I figured I'd use the dynamic text feature along with an XML file to streamline the updating process. I've worked through Kirupa's Displaying XML Data in Flash tutorial (which was very well presented) and was able to get it to work while understanding the theory of how it worked. However I can't seem to get it to function when applied to my particular application.
After 4 hours of troubleshooting, I think I've isolated the problem to the actionscript component: I think (and I could be wrong) that something needs to reference the nested movieClip that contains the dynamic text layer. It works fine if everything happens on the first frame of the _root timeline. But any elements that I try to bury within a movie clip fail to display. I'm using the code from the tutorial as follows:
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("content.xml");
[code]....
View 2 Replies
Jul 25, 2007
I have loaded a swf using AS3, using the
Code:
import fl.containers.UILoader;
import fl.controls.Label;
import fl.controls.ProgressBar;
so MC is called myUILoader, I want to navigate to another section of the FLA and I put an if statement on the function for the button:
Code:
function mMenuNav1(event:MouseEvent):void {
var nav:String = "home";
mmBtnsOn();
[Code].....
Why the sound doesnt stop after the child has been removed and why I can't stop the MC????
View 10 Replies
Nov 18, 2009
Code:
var whatSpecialTrain;
var specialTrain:int;
var a:Array = [1,2,3]
[Code]....
how i can do what i'm doing here without doing it the long way? The only other way i know how to do this is do if statements and duplicate heaps of code, one for each corresponding value...
View 3 Replies
Nov 17, 2006
If i attach 50 movie clips to content_mc. and then i run another function where i want to:
1. clear all of the attached movie clips on content_mc
2. repopulate content_mc with new movie clips
how do i clear content_mc?i want to just do a magic content_mc.clear like you do with the drawing junk.
View 2 Replies
Aug 3, 2007
I'm using this code to create a row of movies:
Code:
var xPos:Number = 0;
for (y=0; y<5; y++) {
var emptycontainer:MovieClip = _root.holder.createEmptyMovieClip("empcontainer"+y,
[Code].....
Is there a way I can easily create an identical row of moviclips with button functionality easily (i.e holder2)? I have a feeling duplicateMovieClip doesn't support dynamically loaded content. I intend to switch the attachMovie command with a loadMovie to load Jpegs instead of movieclips.
View 1 Replies
Jul 27, 2003
Now that I'm on the verge of madness I must consult the forum. I'm simply trying to take one movie clip I made, make it behave like a button, and attach multiple instances of it on my stage, each of which will load a different image to the page. Therefore each movie clip instance contains one crucial bit of unique info -> a number.
That way when I click on the upper left movie clip button it will load ["poster"+this.num] where this.num = 1 and so on. Im having a heck of a time talking to the variables stored in my movie clips... tried to do an onLoad since I only want to set it once but to no avail. any ideas? i'm confused myself just trying to explain it so i'll attach the fla, it's not too big.
View 2 Replies
Nov 30, 2006
In my stage im loading many dynamic movieClips.at the same tim i have the static movieClips too..while i'm loading these dynamic movieClips, thats overlapping the static movieclips on the screen.. actually i need the static movieclips at the topmost position. is there any option to do like?
View 2 Replies
Jul 17, 2011
Hello all. I've been writing AS1 and 2 for a loooong time but I'm just starting to get into AS3 and it's... challenging. Making my brain think differently when Flash is still Flash is tricky but I'm coming along. This is my first piece of AS3 that I'm putting together and it loads an image, creates a movie clip for it to live in and then repeats the process 9 more times. The dynamically created clips are supposed to be staggered from the bottom left to the top right. However, when I run the code it only shows the final iteration in the top right.
[URL]
...and his code is almost exactly the same except for the image load. I left the image loading code out of this post since it works perfectly. There's a listener in the image load that triggers when completed and fires the function below:
Code:
var cardNum:int = 1;
function imageLoaded(event:Event):void {
var myMC:MovieClip = new MovieClip();
[code]....
View 5 Replies
Jul 16, 2009
I've found some code on the net that creates a dynamic pie chart using xml.It works fine, but what I want is for it to make each slice a movie clip so that I can target the slice to show a the percentage on mouse over.At the moment all the slices is in one mc called piechart.
Code below
ActionScript Code:
var titles:Array = new Array();
var values:Array = new Array();var xmlLoader:URLLoader = new URLLoader();
var xmlData:XML = new XML();
[code]....
View 2 Replies
Sep 7, 2007
unload some duplicated movieclips. Sometimes the script is not unload all the movie clips. And on frame 2, how to say by scripting "not go to next frame if all the movieclips is not unload"? Well the script is:
[Code]...
View 3 Replies
Feb 19, 2008
I want to dynamically attach movie to the stage. This is fine. I'm able to do it. but i want to check if the dynamic movie clipe has executed all its frames (reached last frame). as soon as this happens i want to attach a diff movie clip. Is this possible? if i use the _currentframe property, it gives always 1 as the frame. it doesnt get to last frame of the dynamic movie clip.
View 2 Replies
Jul 23, 2010
What I want to do is have 6 menu buttons with states (such as mouseOver, mouseOut and mouseClick). I have my MC's on stage as:
menuMC.homeMC
menuMC.flashMC
menuMC.videoMC
[code].....
View 5 Replies
Jul 3, 2009
I am undergoing a huge flash project at the moment and as wondering whether or not an approach would work for something. Basically everything in the project involves loading data and movie clips dynamically in certain arrangements etc. I have built everything already bar a couple of things to create demos including dynamically loading mcs from the library etc all with as3, but now I am moving on to loading data dynamically and before I immerse myself completely I was wondering whether or not something is possible. Basically as I mouse over an mc i want a couple of things to come up which would be held in a database, such as a question and an answer, but this data will change quite frequently when the demo is up and running, is it possible for the data to be updated in the dynamic text boxes without mousing out and mousing over again? That is one of my concerns ( I have a couple ).
I had thought of maybe using a timer to query the database every 2 to 3 minutes and use php and mysql with as3 to then load the data into the text boxes, hopefully without having to mouseover the mc again and simply leaving the cursor over the mc the whole time. My main concern is whether or not I can query the database on a regular basis... using a timer method as described above, or is this simply stagnant data? i.e. can i use php and mysql in as3 to continuously query a database?
View 2 Replies
Jun 26, 2009
Currently i am experiencing a problem with pulling Movie Clips from a Library and Tweening it (adding) it to the stage at runtime and then quickly removing it (addChild()) and removeChild(); I have 6 Library items, which i am interested in using.
car_mc1
car_mc2
car_mc3[code].....
My Question:
1) The name is not genereted through the addChild metho, is there an temp Add solution or something that would add on the Fly?
2)The object when working as a single object, gets Tweened out to -200, i just want it to Tween out and get Removed form the stage?
3) The Movie Clip remains on the screen while another instance is brought on when using static naming convetion (this is just to say that i have tested it),I only want the object to be available for the Tween, nothing else
View 6 Replies
Jun 17, 2011
I have a difficult question to explain. I have a class file that loads an external XML file, parses the main nodes into an array, then creates a movie clip instance for each of the main nodes and creates text fields inside of the movie clip instance based on the child nodes in the XML.
Each movie clip instance that is added dynamically has a movie clip embedded in it that acts as a tab. I update the dynamic text of this embedded movie clip based on the name of each main XML node.
Now where I am getting stuck is that I have attached an event listener to each tab movie clip that is inside of each dynamically created movie clip. What I want to do is when the user clicks this tab have that movie clip move to the top of the display list on top of all the other dynamically created movie clips. My problem is that I don't know how to get the references correct.
When I create the movie clips dynamically I store the objects in an array. The problem appears to be that the event is fired for a movie clip inside of the dynamic movie clip so I don't know how to reference the parent movie clip. Maybe it is something else but I don't know how to make reference to the main movie clips that I want to swap.
I hope that makes sense. My main question is how do I use the swapChildren or setChild functions when the movie clip clicked is located within the movie clip I want to change in the display list as well as the fact that this movie clip was created dynamically.
[Code].....
View 7 Replies
Oct 11, 2006
Is it possible to create a completely dynamic menu by creating empty movie clips and loading external images into them? I'm experimenting with this, but it seems there is no way to create rollover/release functions for these dynamically created MC's.
View 6 Replies
Sep 13, 2009
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
View 1 Replies
Aug 10, 2007
I have a Flash site I am developing that feeds in XML into various arrays and populates dynamic movie clips and text fields. I am having trouble making a for loop that works with my movieclips and text fields. I am probably only missing one step and if I can figure it out I will cut my lines of code about 10X. I have attached the fla and image files in a zip file.
View 1 Replies
