ActionScript 2.0 :: Any Way To Build MovieClips From XML?
Apr 15, 2005
I'm having trouble pushing my data from an XML file into movie clips. I'm loading the xml just fine, it traces out nicely from an xml object, but I can't for the life of me figure out how to populate text fields in my mc's, and duplicate those movie clips correctly with the data from each child node. I have the identifier in the library named 'multiply_mc' and the 'container' clip is sitting on the stage. With the script as it is, I only get 4 clips created (supposed to be 12), and none of the text is being pushed into the text fields in the clips.
Here's the XML file
And here's the AS
View 4 Replies
Similar Posts:
May 11, 2009
I'm trying to build a simple mask with 2 children mcs. The masking is almost working, but the two children only mask where they don't overlap. I've tried using a mask layer and using code, and it's the same effect either way.
Below is the code:
import caurina.transitions.*
sticker.mask = noteMask_mc;
Tweener.addTween(noteMask_mc.mask_1, {y:-540, scaleX:2.5, scaleY:2.5, time:10, transition:"easeIn"});
Tweener.addTween(noteMask_mc.mask_2, {x:255, scaleX:2.5, scaleY:2.5, time:10, transition:"easeIn"});
View 2 Replies
Mar 31, 2011
In TFS 2010 build, I have a new build and I want to call an ant script that builds Flash. How do I call the ant script? Also How can I compile the Flash directly? I've seen the Power Tools and this question but it doesn't help me as we don't have TFS 2008. I can't find any documentation on how to use the power tools except the 1 sentence on the bottom of download page saying to create your build the old way and import it (which isn't very helpful). I've installed the power tools on the agent computer but I don't see any new options in the Toolbox when I'm designing the build flow.
View 2 Replies
Apr 14, 2011
I just started working with ant a few days ago. Right now I have a general buildall.xml which should call each project's build.xml. Because some projects depend on each other, I need to rebuild some other projects which depend on it. This isn't a problem--I'm just setting the depends property of the target. However, ant is always building the dependencies, even when the files haven't changed.Let's say project1 has no dependencies; project2 depends on project1; project3 depends on project1, 2; project4 depends on project1, 2, and 3; and so on.I could hack a solution which looks at project K, and checks if project 1 .. project K have updated files using uptodate. If so, then run the target. This is messy and appears unnecessary.
What is the cleanest way to implement this?EDIT: So I decided to just hack in a bunch of targets, "check_projectK" where it does the uptodate checks on all of its source files, its build file, and the build files of the 1 .. K-1 projects. Due to dependencies, this is always handled correctly. However, this is still a large amount of copy and paste for a large workspace.
View 1 Replies
Jul 30, 2011
Using FDT, when I have a debug configuration with several operations in the launcher chain and the final launcher opens in Flash Player, how can I retrieve the build output from the console once the build is complete and Flash player is running?
It seems that once Flash Player has started the console clears to make way for the application's trace output, but I need to be able to look back over the events and build times for each item in my launch chain while Flash Player is running. Is there a setting I can enable to either log my build output to a file or to preserve it in the console?
Edit: I know I can still read the info when building normally, this question is specifically for building with the debugger.
View 1 Replies
Aug 6, 2010
I m trying to make sense of how to load a swf into a parent MovieClip and allow them to communicate.I ve attached two zip files � one which works fine and the other doesn�t. Unfortunately (for me), the one which doesn�t work is closer to my current project.I need to load movieclips into the parent movieclip. The parent movieclip has controls which rely on values parsed from the child movieclip.In the parent movieclips I wait until the loading is complete and so the values should be passed. However, the values aren�t passed unless I use a button (or timer), to pass the values (see the working exampes).The code which doesn�t work is:
Parent movieclip:
ActionScript Code:
stop();
var myLoader:Loader = new Loader();[code].............
View 5 Replies
Dec 19, 2009
I have two SWF-Movies. One is exported into eht other as Child.Can I instance the Objects of the two libraries in all places, where ActionScript is possible? (In Keyframes of the MovieClips and in external class definitions.)
View 3 Replies
Sep 9, 2011
Looking for a way to stop all movieclips both are the stage and that are children of the ones on the stage.
I toyed with looping thru stage's children so I can first target clips on the stage. But I am getting error.
for (var i:int = 0; i < this.numChildren; i++) if (this.getChildAt(i) is MovieClip)
{
this.getChildAt(i).stop
}}
View 5 Replies
Feb 5, 2009
I have created 25 MovieClips on the stage in 5 X 5 matrix.How can I treat 5 movieclips in each row as a group of movieclips so that I can apply same set action to them?(Similar to RadioButton functionality. )
View 6 Replies
Sep 15, 2010
Printing an MC is easy enough. But I am having trouble printing an MC which has multiple MCs inside of it. They just don't get printed.
I am trying to avoid printAsBitmap.
View 5 Replies
Oct 21, 2010
I want to test mc animations without having to hit F12 to see if they work correctly. For instance, if I have an animation movieclip and then I make another movieclip and drop that aforementioned movieclip within, and animate [via the timeline or library preview] I'm unable to see on-the-fly what my animation looks like... it only shows the top most nest, unless I F12 it.
So if I have a character blinking eyes (one movieclip) and then I create another movie clip of the face, and put that aforementioned movieclip within, the preview animation within the library does not show how it'll be viewed when F12'n it.,,,, it'd be great to see your animations on the fly.
View 1 Replies
Oct 30, 2007
why does a MC inside another MC have different _x and _y values than the main timeline?What I am trying to do right now is animate a MC inside another MC then get the main MC holding everything to move where that new MC ended animating at (it's part of a game I'm making.)
I know it's confusing but Flash shows the cursors current X and Y in the info panel, which is the same as the main timeline. Yet inside the movieclip, an x of 76 and a y of 277 on the timeline is -195 and -30.9 (respectively) inside the MC.How do I fix it so I can get the _x and _y values to match up so I can tell the main MC to reposition itself to the new X and Y (of the inside MC)
View 1 Replies
Mar 27, 2008
I have a movieclip called mapWindow, inside mapWindow are dynamically created movieclips of various sizes. The movieclips inside the mapWindow don't take up the entire space of the mapWindow and thus I use a startDrag on the mapWindow upon detection of a mouse press. The problem is, I don't want the start drag to start if the mouse is detected over any of the child movieclips inside mapWindow.
I have a few ideas of how to proceed, but I'm not sure how to reference all child movieclips of a particular movieclip - or something along those lines.
It would be easy to use the hittest function if I knew how to reference all the movieclips I need to, but alas...
View 1 Replies
Nov 20, 2009
Using Flash CS4 - AS 3.0
how to control a movie clip using a separate movie clip.
on scene 1 (2 frames long), i have 2 movie clips.
-bFind (24 frames long)
-textEffects (14 frames long)
i want to jump to frame 7 of the textEffect movieClip when i hover over bFind
i have my AS code in the first frame of the movieClip called "Bfind"
Code:
stop();
addEventListener(
MouseEvent.MOUSE_OVER,
[Code].....
View 5 Replies
May 5, 2010
I'm using flash MX 2004 Professional. What im trying to is the following: I have 9 movie clips, each has a "closed" and "open" state. Basically, when I click no.1 I want it to animate open, and then, when I click no.2, it must first check if any of the other clips are in their "open" state and if so, close them. I've worked with the following, but it doesnt seem to be working:
[Code]...
View 4 Replies
Oct 5, 2008
I am still transfering from AS2 to AS3 and right now i am having a very annoying problem. THE STRUCTURE:
Maintimeline contains 2 buttons that i want to use to access children in a bunch of movieclips. rectangle_mc has circle_mc circle_mc contains xx_mc xx_mc contains wtf_mc placed on frame 1 on maintimeline Why can't flash see my nested movieclips? I remember in AS2 you could go down the line:
[Code]...
View 15 Replies
Jul 30, 2010
I am starting with AS3 programming icm with Flash Builder 4.I have created a "Main" class which is the initial stage.On this stage there is a movieclip called mcMain.In this mcMain is 4 other movieclips: mcStats1 mcStats2 mcStats3 mcStats4 .How can I access these mcStats1-4 from the code to make them go to another frame?I tried:
var t:MovieClip = MovieClip(getChildByName("mcMain"));
t.getChildByName("mcStats1").gotoAndPlay(3);
But that just keeps giving me null reference errors:TypeError: Error #1009: Cannot access a property or method of a null object reference.
View 4 Replies
Nov 17, 2010
I used to work in AS2 and something like this worked:
mc1.mc2.onRelease = function () {
mc3.gotoAndStop(2);
}
But converting it to AS3, it doesn't work anymore.
function goMC (e:MouseEvent):void {
mc3.gotoAndStop(2);
}
mc1.mc2.addEventListener(MouseEvent.CLICK, goMC);
What am I doing wrong? I can't seem to control movieclips within movieclips.
View 2 Replies
May 2, 2009
I am trying to build a web banner, the functionality of which has to be pretty identical to the one on the following home page http://www.perfectblue.co.uk/. The only difference is that I am using static images, not flvs like in that banner. I am sitting here planning how to build it but its going right over my head. Can anyone give me any advice about how to script something that works like that? At a first glance, I thought possibley onRollOver / RollOut functions but now I'm not so sure.
View 2 Replies
Feb 23, 2009
[URL].. looking to build a gallery like that with fade transitions and next/previous buttons. that particular one is using an XML file for the photos. Any ideas or tutorials?
The one they are using is from a $30 program but I would like to see if there is a way to do it without paying for a program.
View 1 Replies
Jan 14, 2010
what I'm trying to make first, so: [URL] the big main box that shows the lastest stuff You can mouse over the small boxes and the content in the main box changes, and if you don't do anything, it goes through the different stories like a slideshow [URL] - like the ign box but hovering over it doesn't do anything, you have to click the button for the content to change So I'm trying to create a mix of the above two, like a slideshow but doesn't change when you mouseover, instead need to click it (see attached file).
What I've done so far is add the time interval, and created links on each page to each other, but if I click a link or let the slideshow run more than one loop it starts speeding up uncontrollably. I think I need to use clearInterval or something, but can't find any tutorials that actually make sense.
View 1 Replies
Mar 29, 2010
I have tried some tutorials but I can't ever get one to work. This program is so complicated. how it was created? All the layers only have one keyframe. Where are the edits/tweens?
View 1 Replies
Apr 2, 2010
I want to put preloader in one sene1 and other content in another sene give me the code which calculates the total bytes and loaded percentage and loaded bytes.how to iniciate in flash cs4.
View 2 Replies
Feb 2, 2011
I´d like to know, how to build a ranking.
Could I build a ranking only with actionscript?
View 5 Replies
Apr 24, 2011
Not sure if this better for stackoverflow or apple.stackexchange.com (as there is a programming angle and a apple angle) so hopefully this is the right place. i need to build a website that normally would need to be done in flash (because of the requirements for animation) but the owner wants to run this site on ipad and iphone. i thought that all of the iOS stuff didn't support flash but looking into the adobe flash website here, it says that it has iOS support.
Can someone please clarify if iPad, iPhone will support a website if i create it in flash If it doesn't, then does anyone know what it means on the link that it has support for Apple iOS ??
View 4 Replies
Jun 13, 2011
I'm trying to recreate a modernized version of this tutorail here - but I'm having problems building building and referencing an SWC file for inclusion in my project in Flash Builder. Whenever I try to reference the SWC, flash says it's "not a compile time constant" - can anyone help me with the process of building a SWC (mainly, naming it so that Flash Builder can reference it) - and then, in Flash Builder, creating that reference to the SWC?
View 4 Replies
Jun 1, 2009
Is it possible to set up FDT so that it only builds the workspace when I save (as opposed to constantly or manually) like it does in Flash Builder (previously Flex Builder) and if so, how?
View 2 Replies
Sep 9, 2009
I got the nice 3d cube from eric Lin. [URL]It would be very cool if the cube can build itself, before it starts rotating. So that 6 faces(left on the stage) transform to one cube(right on the stage).
View 0 Replies
Feb 6, 2003
Does anyone know how to build a guestbook in flash. I guess it would require some knowledge of either ASP or PHP, of which I know nothing about.
View 2 Replies
May 8, 2003
where I can find a GOOD tutorial on how to build an equalizer. I tried the one at flashkit.com but it tried to make me download all these software and the links were all broken and I thought it was explain poorly.And I was also wondering if there was any action script amoungs the lines of [code]Is "movieloaded" a valid actionscript?
View 7 Replies
