ActionScript 2.0 :: Assing Var To Buttons Hidden Inside A MovieClip?
Dec 13, 2010
As I was creating a cheap Flyout Menu I ended up being unable to assing a "global" variable to different buttons.I have a "main button bar" with 5 different buttons wich as you RollOver one brings up another bar with multiple buttons attach to it.
Now these "2nd level" buttons are set in a Movie Clip as this one starts invisible and I don't want people to see the hand cursor over them. I know how to make this happen to each button individually but since I have 8 "2nd level" btns I don't want my ActionScript to be 100 lines long So to put this easier to read and write, to minimize the chances of making mistake I am asking you this: Is there a way to assign a single variable to refer to these 8 different "2nd level" buttons?
View 3 Replies
Similar Posts:
Oct 21, 2005
I'm creating a menu bar that is a movieclip and inside the movieclip consists of the buttons.Now the menu bar is twice as WIDE as what is visible on the stage.The only part you can see is the text 'menu' on a bar.Then when the mouse hits the bar, it flies across the screen to the otherside of the bar where the menu buttons are.Now the menu bar does its animation over 20 frames - the last frame being the frame where the menu buttons are now visible.
On the last frame i have the 'stop;' code
On the first frame I have this code:
Code:
stop();
this.onEnterFrame = function(){
if(rewind == true){
[code]....
View 2 Replies
Aug 17, 2006
I have a MovieClip and inside I have 5 buttons and each button should open its URL.
View 5 Replies
Jan 8, 2010
I'm working on a project for a presentation that has hidden buttons. I want a way that the hidden buttons can be located, if someone else has to give the presentation. I've seen an example where if the user hits the tab key it would cycle through all buttons and outline them in red. I am new to flash and action script and have no idea how to do this.
View 4 Replies
May 3, 2010
On my stage I have two buttons that open a movieclip that has more buttons in it.
If button 1 was used to open the movieclip, then the internal buttons each load up text. If button 2 was used, the buttons load up images.
Problem is, if I click on button 1, (to go back to loading text) the last image remains, as I'm not sure how to code removeChild to act if the parent button has been pressed.
Currently, I successfully use removeChild to remove each image as image buttons are clicked within the movieclip. But I'm not sure how to remove the last one?
View 2 Replies
Dec 29, 2009
I'm making a flash CS4 presentation and I just made a navbar movieclip (grey rectangle) and put 6 buttons on each layer inside of it. I put this movieclip (navbar) on the main movie timeline in a layer. I keep getting this error (1120 access of undefined property) and the buttons simply don't respond to the main timeline. It used to work fine when the buttons were on the main timeline. Should I make a parent child reference ?
For example, this code for the pause button won't work:
pause_btn.addEventListener (MouseEvent.CLICK, stopButtonClick);
function stopButtonClick (e:MouseEvent):void {
this.stop();
}
View 4 Replies
Nov 9, 2004
I need to disable some buttons in a movie in level0. I manage to do that...but the thing is i have some other buttons inside a movieclip and i can't disable them... what should i do?how can i acess the buttons inside the movieclip to disable them?the code i'm using for the buttons in level0 is:
on (release) {
for (i=0; i<4; i++) {
_level0["button"+i].enabled = false;
[code]......
View 1 Replies
Jun 29, 2006
I have a movieclip and some sort of buttons inside of it for interaction. The Movieclip is in the _root and all other stuff inside of it. Now problem is: Whenever I attach an action to he MC like:
Code:
this.onEnterFrame = function() {
_root.mc_stage.onPress = function() {
startDrag(_root.mc_stage,false);
}
_root.mc_stage.onRelease = function() {
stopDrag();
}}
And run the swf, I cannot interact with the buttons. I cant click them. When there is no action applied to MC on the instance or the timeline the buttons work perfect. How can I make both work ? Drag the Movieclip with mouse and also make buttons work.
View 1 Replies
Aug 17, 2006
I need to know how to make several buton inside a MovieClip to link URL's, or something else (besides onRelease)? The Movie Clip has already onRollOver and onRollOut states in it. This is the .fla file [URL].
View 1 Replies
Dec 29, 2009
I'm making a flash CS4 presentation and I just made a navbar movieclip (grey rectangle) and put 6 buttons on each layer inside of it.
I put this navbar on the main movie timeline in a layer.
I keep getting this error (1120 access of undefined property) and the buttons simply don't respond to the main timeline
Should I make a parent child reference ?
For example this code for the pause button won't work:
pause_btn.addEventListener (MouseEvent.CLICK, stopButtonClick);
function stopButtonClick (e:MouseEvent):void
{
this.stop();
}
View 3 Replies
Nov 9, 2004
I need to disable some buttons in a movie in level0. I manage to do that. but the thing is i have some other buttons inside a movieclip and i can't disable them... what should i do? how can i acess the buttons inside the movieclip to disable them? the code i'm using for the buttons in level0 is:
on (release) {
for (i=0; i<4; i++) {
_level0["button"+i].enabled = false;
}
and for acessing the buttons inside MyMovieClip...?
View 1 Replies
May 14, 2009
I have a timeline with several buttons on it - some if these are created at runtime, and some by putting buttons on the page on frame 1 I then have an emptyMC into which I import a swf that COVERS the whole stage. This all works fine - you can't see anything of the underlying material. However, as you "mouse around" it seems that the buttons that are covered are still active - pointer becomes a hand etc. I can disable the buttons using enabled=false. This is quite invloved, and I would have thought that these buttons wouldn't be active - surely they are covered! How is the possible, and is there a neater way to stop these buttons being active.
View 4 Replies
Jun 14, 2010
I've been using this site for a while as I'm taking flash lessons in my college and right now I am building a portfolio website and am in need of help, so I've decided to come to you for some light. My problem is in the portfolio I'm creating in AS2 I have the photo and video galleries in form of a click'n'drag movie clip that slides sideways. So far, so good. However, when I add buttons to my mc (and that includes the ones in all my video players as well), they don't work at all. I think it has something to do with the function I'm using. Is there any solution for allowing buttons to be clickable? This is the code I'm using directly in the mc:
[Code]....
View 4 Replies
Mar 12, 2012
I am currently creating animated buttons that have a movie clip inside them (including tweens). I created a button and copied this six times. I would like to change the colour of each individual button, but when I do this it changes the colours of all the buttons. How can I do this so it changes the individual the colour of a single button.
View 1 Replies
Jun 29, 2010
I have a couple buttons that work outside of the ScrollPane but don't work within it. This is my exact code, how do I get them to work?
scrollPane.source = myContent;
scrollPane.setSize(173,500);
K1Button.addEventListener(MouseEvent.CLICK, playVid);
function playVid(e:MouseEvent):void{
myVideoPlayer2.myFLV2.source = "video/K.mp4";
[Code] .....
View 6 Replies
Dec 13, 2010
I have a draggable movieclip, mc_PI on stage in which I have another movieclip, mc_PIcontainer into which I load an image.I then place a few buttons, btn_Ant1, btn_Ant2, etc. inside mc_PI.mc_PI drags just fine within the bounds I specify, but I cannot click on any of the buttons that are located inside mc_PI.I need the buttons to be inside mc_PI, because I need them to drag along with the image located in mc_PI.mcPIcontainer.[code]
View 11 Replies
Feb 25, 2011
This is my first time coding a website using ActionScript. So far everything has went very well, I designed the website in Photoshop, and imported to Flash CS5. Then I cleaned everything up, and started adding navigation to the various pages using buttons.The website is constructed in a very simple manner, there are five main pages and they are connected by buttons on a static navigation bar (the first page, home, doesn't have a corresponding button). Then there are nine sub pages, that each contain information on a character of the game, and are connected to corresponding buttons in the 'Character' layer/MovieClip. My four menu buttons (Story, The World, Characters, Extras) all navigate correctly without problems.
The problem arises because inside my Characters page (a movie clip) are nine buttons, each linking to a different page. These buttons should bring the timeline to the frame specified, but when the buttons are clicked nothing happens. I've spent hours searching for a solution to this, but with no avail, and I have a feeling the answer is prettysimple.gotoAndStop("gowang", "Scene 1");line in the Gowang character button function with:MovieClip(root).gotoAndStop("gowang");
View 3 Replies
Aug 25, 2010
My buttons work fine in the main time line, but I need to place them in frame 1 of a mc_pages, I get an error about it saying "the statement must appear within on/onClipEvent handler". And I just can't figure out how to do that to save my life. If pc's were cheap their would be a pile of them outside on the curb. I'm thinking I need to split up this action and place some on frame 1 of the main time line and keep some for for my button on frame 1 of pages, but what part? how?
My button loads a new swf in the mc placeholder.
btn01.onRelease = function () {
// let's first unload the current movie, to refresh the cache
(placeholder.unloadMovie());
// SETUP THE MAIN VIDEO PLAYER
autoPlay = "true"; //
autoLoop = "false"; //
[Code] .....
View 9 Replies
May 19, 2009
I'm fairly new to actionscript and could use some help. I'm using Flash CS3, AS 1/2.I have made a musicplayer that is inside a movieclip, but when i pull the movieclip onto the stage the buttons inside the movieclip stop working.Inside the Movieclip:I have the music start on frame 1 and then gotoAndPlay at frame 3.Frame 3 has a stop();, a button that stops the music and gotoAndPlay "play".Frame 2 has a stop();, a button that plays the music and gotoAndPlay "stop".it all works fine on its own, but as soon as i stick it on the stage it stops working.Labels have been set up fine, it works when i use 'Test Scene'. I've hardcoded all the buttons to work on the timeline frames and not on the buttons.[code]
View 1 Replies
May 25, 2009
How do you get buttons to work correctly inside the Movieclip? When i click on my buttons they show what is supposed to be shown for a split second then goes to the nested frame 1. my website is: [URL] If you go to the Interest button, you'll see what i mean. the clip loads up fine but when u click on the Adobe cd it won't work correctly. The images flash on screen then disappear.
View 7 Replies
Jun 29, 2010
I have a couple buttons within a movie clip of a ScrollPane that are not working. This is my exact code, how do i get them to work?
***************************
scrollPane.source = myContent;
scrollPane.setSize(173,500);
K1Button.addEventListener(MouseEvent.CLICK, playVid);
[code]....
View 1 Replies
Feb 18, 2009
I've been working on a new issue while giving a break on cracking the other one.I have a movie clip acting as a button with rollover/rollout animation- we'll call it menu_mc for simple reference.I'm basically creating a rollover submenu. I've set it up a few different ways but the most user friendly has been hiding the submenu_mc (which has 4 linked buttons to root frame inside) by doing:_root.sub5_mc._visible = false;then inside the menu_mc with the rollover I have the submenu trigger set to show: _root.sub5_mc._visible = true;The links are working fine but the problem I am running into, is that the rollover state, once over the submenu_mc, does the rollout function and leaves the submenu_mc hanging there by itself- still functioning perfectly.You can go back over the menu_mc and it will play out the rollover again.On the other simple animated buttons (which do not have submenus) I have coded:
on(rollOver) {
_root.sub5_mc._visible = false;
}
[code].....
View 3 Replies
Mar 3, 2010
In my main .swf I have labels on the timeline, navs for those btns are on the first frame of the AS layer and each button sends the playhead to a different frame. On one frame called fr1 there is an mc called mc_1 that appears on stage when the playhead stops there. Inside mc_1 are a set of navigation buttons that need to call external .swfs.
Do I add event listeners on the last frame of mc_1 for each button? how do I call the loaders for the swfs on the buttons since the swfs will load on the main timeline NOT the mc_1 timeline?
So label on main timeline called fr1 will load external1 swf , on fr10 external 2.swf will load and so on.
View 4 Replies
Sep 13, 2009
i have made all my buttons by movie clips and all the different pages movie clips, but i have movie clip buttons, inside those movie clip pages, and cannot figure out how to make these movie buttons inside the movie clip work when that specific page is loaded, the"links" inside that movie clip page, how do i make that link to go to the next page.
View 0 Replies
Jan 16, 2008
I've got a movieclip with an rollover function. The movieclip has buttons inside, but they don't work. The action applied to the movieclip is the the scale (I'm using Tweener to make the scale action).
View 1 Replies
Oct 5, 2008
I still can't figure the way to make my buttons work
[URL]
here is my fla file... Basically I have a rollover buttons inside a movieclip and my action script in the first frame of the scene is the following
_root.designer_mc.b1_01.onPress=function(){
goto("designer01");
}
b1_01 is the instance of the button inside designer_mc movieclip~ however I ealized that buttons won't work in movieclip and i just don't know what's other solution
how to get this fixed~ i m so stuck and I have wasted my past 2 days trying to figure this out and still no result...
View 4 Replies
Jan 21, 2011
Im trying to build a site where the images are load in via AS. The problem I'm running into is that the image that is loading from outside of the swf file is now covering my hot spot( buttons). How do I make it so that the load in image will always show up under the hot spots ( buttons)?
View 3 Replies
Jan 10, 2011
elow sir I am new here in actionscript and i'm using actionScript 3.0 I need to know what correct code to navigate this. First I have a movieClip from stage in main timeline and i use it as an container for my sprite an instance name of "container_mc" and when that sprite plays after it, it will stop and it will appear a button, I need that button to remove this sprite from the main timeline.
View 1 Replies
May 11, 2010
" I have 3 different video in (layer "content) each video in different frame(Video1 in frame 1),(video2 in frame10),(video 3 in frame 20) ..Also, i have 3 different buttons in "buttons layer" ( button1, when click, it play video1) (button2, when click, it play video2), (button3, when click, it play video3)...what i need when i click button1 and play video1 all the buttons should be hidden... when the video finish playing it should be appear again... same thing for button2 when i click it and play video2 all the buttons will be hidden until the video finish playing .this is my code
Code: Select allvideo_button1.addEventListener(MouseEvent.CLICK,clickListener1);
function clickListener1(event:MouseEvent):void {
[code].............
View 2 Replies
Nov 16, 2010
I'm having some trouble finishing an interface i'm working on,the function indica() adds a menu listing of items (indicadores) inside a mask because its too large, and i added a scrollbar that allows to scroll through the items but now i need to add the buttons inside the movie clip indicative,i can add symbols and buttons, but i'm having trouble having them call functions inside the same class that the function indica() is running.[code]
View 2 Replies
