ActionScript 2.0 :: CS3 : Bring Layer To Top And Fadein?
May 29, 2009
I have a menu set up so that when you rollover a button it brings an image to the top that corresponds with that button. This is currently set up by using swap depths. The problem is that I want the layer to fade to the top instead of just popping to the top. I turned the layers into MCs and put fades inside the MCs and that works with the code to bring the layer to the top and fade in. But when it does come to the top and fade in, it's deleting whatever layer was previously on top rather then fading overtop of it, so when the new layer comes to the top, you can see the very bottom layer is it fades in...
Code:
doubleHung.onRollOver = function(){
doubleHungWindowsMC.swapDepths(_root.getNextHighes tDepth());
doubleHungWindowsMC.play();
}
View 1 Replies
Similar Posts:
Jun 30, 2009
I have made some images into animated buttons that enlarge on rollover, bring each layer to the front on rollover, I am working in CS3 with actionscript 2
View 2 Replies
Nov 24, 2009
i've been receiving a ton of help here and love it but Im having a really bad time fixing this one part of an infographic im making. i need to do the following in a flash cs4/as2.0 file:
1.) make all boxes draggable on the stage
2.) on click/hover bring layer to the front.
var city_arr:Array = new Array(THIS CONTAINS A LIST OF ALL MY CITIES I AM USING AS MY NAMING CONVENTION);
[Code]...
View 3 Replies
Sep 8, 2011
I do Flash web banners, and use the following code to create a button for the link that publications set up on their end:
var myBtn:MovieClip = this.createEmptyMovieClip("myBtn",this.getNextHighestDepth());
var lineThickness:Number = 2;
var lineColor:Number = 0x00A1E4;
[code].....
View 29 Replies
May 18, 2009
So, I have a line of buttons that pop up when moused over. Unfortunately, due to their proximity to one another, I have a lot of overlap occurring. Is there a way to bring the activated button in front of the others via as?
View 8 Replies
Oct 21, 2011
The following code works fine but always on Top Layer. How can I bring it down?
Code:
var mySwf1:SWFLoader = new SWFLoader("AnalogClock.swf", {width:225, height:225, container:this, onComplete:completeHandler1});
mySwf1.load();[code]....
View 8 Replies
Jan 25, 2010
bring my correct uiloader/swf to the front/into focus when the relevant list item is triggered? This is my code at the moment
Code: Select allimport fl.containers.UILoader;
import fl.controls.List;
var list1:List = new List();[code]........
View 3 Replies
Aug 26, 2011
Don't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 Replies
Nov 19, 2009
I am doing some research on creating clcikTags. I read a few places that the clcikTag should be on the top layer. That has been fine, but now I want to loop it and I usually put my actions in the top layer. Will this cause a problem? Am I better off just putting my loop action on the last key frame of the clcikTag layer?
View 3 Replies
Aug 9, 2010
Im creating a program that is designed to allow the used to select 3 pictures (movie clips) and print them off on a single peace of paper.
The program works by allowing the user to select 3 graphics (the graphics are actually instructions for various exercises) and then moving the desired movieclips onto the stage. This all happens on a layer named "Content"
So far the program will allow the user to select the movieclips and will move them into place on the Content layer as well as move smaller versions of the pictures into a preview box the only thing it does not do is print. (the most important bit)
View 5 Replies
Mar 22, 2012
Is it possible to create multiple layer masks over a single layer using Actionscript3?Below is the flash effect I wanted to create with masks.First it starts from A and goes to B and C simultaneously.Then from B it goes to H and D simultaneously (the same applies to C).This is how the end result will look like.ps. I need my background to be transparent. I'm embedding it into a web page later.
View 2 Replies
Feb 11, 2010
I can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 Replies
Jan 11, 2010
I want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
View 3 Replies
Aug 17, 2010
I have a container MovieClip called Drags where I can drag stamps (other MovieClips)--they are added to the Drags container via addChild. I have a second container MovieClip above that one (display order-wise) call Paint that contains a bmp, and some sprites used for adding a layer of paint.
My question is this: I need to be able to click on the Paint layer when I am above a draggable MovieClip and trigger the MouseEvent for the correct object to drag it around, but the item must always remain below the Paint layer.
View 10 Replies
Feb 11, 2009
The client requested a simple slideshow with 8 images. I was able to piece that together, but only issue left is how to add a fade-in fade-out effect. The images I'm using on not embedded in the flash file but are ref from an xml file so the basic method is out of the question.
[]---XML FILE -----------------------------[]
<xml>
<images>
<a title = "_0000_shiny_wristlets.jpg" />
<b title = "_0001_LSSRT.jpg" />
[code]....
View 5 Replies
Jul 12, 2002
I'm trying to analyze the sample file load_images.fla which is delivered with flash mx... and here's my problem:there's a line in the first frame in the actions layer which is as follows:if (whichPic<5 && !fadeIn && !fadeOut) {.........}now what is "fadeIn" or "fadeOut"? I thought it might be a method of the MovieClip-Object, but it's not listed in the actionscript-reference. then I thought, it could be a method defined within the flash-movie itself, but it isn't (at least i couldn't find it). so what is it?
View 1 Replies
Sep 2, 2009
I am working on using AS3 to do my tweens, rather than working solely on the timeline.
Just a quick question, say I have a logo... when I get to frame 5 I want that to fadeIn. I have the AS3 to tween it in, however, I am not sure what I assign my function to?
View 10 Replies
Sep 4, 2009
I am just trying to get my as3 tweening skills locked down around the basics. So, for this example, I have a logo / home button fading in, this code is working for that... however, is there a way to addChild (home in this case) via the tween code, so that I do not have to add the child at alpha0 "then" fade it in?
import fl.transitions.Tween;import fl.transitions.easing.*;
var home:Logo = new Logo();addChild (home);home.x = 400;home.y = 300;home.alpha = 0;
var fadeIn:Tween = new Tween(home,"alpha",None.easeNone,0,100,200,true);
View 6 Replies
May 16, 2004
I like to think i have a decent knowledge of AS, but this silly little problem has evaded me... Check out my FLA. I'm trying to make a very simple function that will fadein/fadeout a MC whenever run.. you should understand from the FLA.
[URL]
View 3 Replies
Feb 24, 2011
I'm building a website with fadein/fadeout transitions between sections. On button click, a white rectangle on the very top layer (filling all the screen) is faded in. Once ended, the section changes and the rectangle fadeout is started.
It technically works, but I've noticed that the first transition is not fluid, while the next are fluid. Does exist an efficient technique to achieve the goal?
View 8 Replies
Sep 4, 2004
I get that Flash glitch of the movie jumoing like one pixel over after alpha transition from actionscript
View 1 Replies
Apr 26, 2005
I am creating an animation. In the Stage I have filled up it almost with many squares in its different rows and columns, and leaving something of space among them (something as well as the tiles), and each of these are buttons, that when they settle above an animation begins type fade, but returning to the main color. My question is with respect to creating an animation with them, I have all in the Stage, but my intention is that when begins, appear 1 to 1, with fade in, and randomly.
View 14 Replies
Nov 5, 2009
I'm trying to do a little comic comedy type video in Flash. I've done an outline sketch with the pen tool of my first character, now I want to color it BUT I want to keep the colors and the outline sketch separated on two different layers. Is there a way I can select the path (outline) on layer A and then colorize it with the bucket tool on layer B? The problem I'm having is that every object I select it automatically jumps to that corresponding layer.
One reason why I want to do it this way is I still want to continue working freely on the outline sketch since it's not fully finished, so that I just can blend the colors out and keep working on the outline, at the same time I want to color it while I go just to see where it's going and to make sure that I'm not wasting my time unnecessarily with trying to do a outline just to find out that it won't work out at the end.
how to do a comic type animation, how to create the characters, how to make them move and talk? It can be a free or paid resource.
View 2 Replies
May 26, 2010
Everywhere I've looked has instructed me to download plugins and addons because they're "superior." I'm just looking for a simple fade in/fade out when a child is added/deleted (if fadein is all I can get, I'll take it.) Here is a function I'm calling...
[Code]...
View 2 Replies
Aug 4, 2010
I'm working on a slide show with external SWFs. I got everything to work (almost evrything ) ...
Whwat I'm trying to do is have a nice transition.. I have the Loading SWFs Fade in... but there's still a split second of the white space under... so I was trying to have the Unloading SWF FAde out wile Loading SWF is Fading in... or something close to that.. here's the code I'm using
//Import classes for easier use
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
[Code]....
View 0 Replies
Oct 27, 2011
I want to do the same effect of time line like the link below, did any one know how to do that! [URL]I know the script for changing photo when you slide the bar in the slidebar!But can I add a fade in fade out effect between photos? Below are the script
"slider._y = slide_area._y;
slider.onPress = function(){
startDrag(slider, true, 0, slide_area._y, slide_area._width, slide_area._y);
}
[code]...
View 0 Replies
Aug 5, 2005
I'm making a banner for a personal site that cycles through a set of images loaded from XML (makes it easier to add/remove images whenever I need to) and I have used the slidshow script located here:how.htm for the base.What I have so far is working as expected, my images load with a fade in effect pause for a moment then cut off and the next image loads with the fade in effect (loop).My problem is that I would like the images to fade out (quicker than the fade in) after the short pause but I cant work out where in the script I need to execute this.Here is the script so far:
Code:
pauseDelay = 6000;
this.fadeInSpeed = 3;
[code].....
View 6 Replies
Jun 2, 2007
I have the following file which creates a really simple slideshow... At the moment you currently have to click to fade out and then fade back in to the next image... I just want it to run and play 10 images continuosly fading in and out...
View 1 Replies
Jan 31, 2009
[Url]
I am using this tutorial to do a slideshow intro and need the ability to change the speed at which the fade occurs. Currently you can do this by changing the frame rate, but if it stays this way it will be overwritten once it is housed in the main flash movie.
View 2 Replies
May 5, 2005
FadeOut or FadeIn this dynamic text. And here is my fla file. So you can see and understand what i'm talking about.
View 3 Replies
