I do Flash web banners, and use the following code to create a button for the link that publications set up on their end:
var myBtn:MovieClip = this.createEmptyMovieClip("myBtn",this.getNextHighestDepth());
var lineThickness:Number = 2;
var lineColor:Number = 0x00A1E4;
[code].....
I have made some images into animated buttons that enlarge on rollover, bring each layer to the front on rollover, I am working in CS3 with actionscript 2
View 2 RepliesI have a menu set up so that when you rollover a button it brings an image to the top that corresponds with that button. This is currently set up by using swap depths. The problem is that I want the layer to fade to the top instead of just popping to the top. I turned the layers into MCs and put fades inside the MCs and that works with the code to bring the layer to the top and fade in. But when it does come to the top and fade in, it's deleting whatever layer was previously on top rather then fading overtop of it, so when the new layer comes to the top, you can see the very bottom layer is it fades in...
Code:
doubleHung.onRollOver = function(){
doubleHungWindowsMC.swapDepths(_root.getNextHighes tDepth());
doubleHungWindowsMC.play();
}
i've been receiving a ton of help here and love it but Im having a really bad time fixing this one part of an infographic im making. i need to do the following in a flash cs4/as2.0 file:
1.) make all boxes draggable on the stage
2.) on click/hover bring layer to the front.
var city_arr:Array = new Array(THIS CONTAINS A LIST OF ALL MY CITIES I AM USING AS MY NAMING CONVENTION);
[Code]...
So, I have a line of buttons that pop up when moused over. Unfortunately, due to their proximity to one another, I have a lot of overlap occurring. Is there a way to bring the activated button in front of the others via as?
View 8 RepliesThe following code works fine but always on Top Layer. How can I bring it down?
Code:
var mySwf1:SWFLoader = new SWFLoader("AnalogClock.swf", {width:225, height:225, container:this, onComplete:completeHandler1});
mySwf1.load();[code]....
bring my correct uiloader/swf to the front/into focus when the relevant list item is triggered? This is my code at the moment
Code: Select allimport fl.containers.UILoader;
import fl.controls.List;
var list1:List = new List();[code]........
I have created a image gallery. There's a image scroller, when clicking an image it show large image on the same layer. I insert the image to this layer like this: addImage("image url", x, y, this). addImage is my own function witch works fine. In the begin of code I create movieclip (var controls:MovieClip;). When I'm inserting images to that, I want to bring the movieclip to front. Because that large image is added after the controls, it will be on the top.
View 6 RepliesBasically, I have a moveiclip within another movieclip and I would like it to... basically make a copy of it and bring it to the stage, outside of the other movieclip.
View 2 RepliesI'm having reel trouble trying to bring a movieclip to the front using setChildIndex. I have 3 movieclips that are being loaded into a movieclip that sits on the stage. I'm using:
[Code]...
i added three MovieClips(say, b1, b2, b3) into two different containers (say, a1, a2, a3) respectively using startDrag(), stopDrag(), hitTestObject() and addChild().I want to add them into one another. ike say :- b1 in a2 or a3b2 in a1 or a3 or vise versa.Now my problem is that, when i again start dragging a movieclip b1 in a1 to add it in other container a2 or a3, the movieClip is behind the other two containers. So i cant detect hitTest() on other containers.ut when i drag movieClip b3 on containers a1 or a2, it is on the front of them and hitTest() can be detected.
My code :
[AS]
var A:Array=[a1, a2, a3];// container
[code]....
I am trying to use setChildIndex() to bring the current movieClip to the front. I have the following code on the first frame of the TimeLine. setChildIndex(currentMovieClip,numChildren - 1); And am getting the following errors. Scene 1, Layer 'Layer 2', Frame 1, Line 20 1093: Syntax error. Scene 1, Layer 'Layer 2', Frame 1, Line 20 1084: Syntax error: expecting rightparen before 1. Should I be using stage or something else is wrong?
View 1 RepliesI have an array of MovieClips on the screen and when I hover over each of them, a tooltip is displayed but how do I bring the tooltip movieclip to the front of the stage so it's not hidden behind the other MovieClips that are already on stage?
View 1 RepliesI have a game set up like so:
DOCUMENT CLASS -->
MASTER LEVEL -->
LEVEL OBJECTS
The MASTER LEVEL is a child of the DOCUMENT CLASS and the LEVEL OBJECTS are a child of the MASTER LEVEL
The MASTER LEVEL is just a border which also shows the time that has passed. The LEVEL OBJECT are stuff like the player and the finish.
The problem is that I can make the player and finish swap depths using setChildIndex but I don't know how to bring the master level in front of its children? Is this even possible or will I have to make a level container that is the parent of the LEVEL OBJECTS and also the MASTER LEVEL. So that the MASTER LEVEL, the finish and the player are all siblings (sort of).
So I am trying to bring a movieClip in front of its movieClip children.
Don't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 RepliesWhen I click on the button, it should bring me to a specific location which is inside the MovieClip, and that works. However, from inside that MC, I want to click on the same button, it should bring me on the main time line. How to do that? I am making of a variable (boolean) here. Is there something wrong in my code? (see path.fla)
(b) How do I remove a movie clip? (see path2.fla) When I clik on the square_btn, it brings me to a location inside that movie clip where there is an oval button. When I reach that oval button, I want the square_btn to me temporarily removed on that page.
Is there a way (in AS2) to copy a layer into movieclip?
View 2 Repliesi have a movieclip that i'm calling from the library, that i'm playing on the ROOT. i was wondering, since its played from the library, is there a way to tell it above which layer to play? for example, i want it to play under the LOGO layer, but above the Background layer..
View 29 RepliesWhat is the quickest way to take a movie clip off of one layer and onto a new layer made below it. I need to keep its location on stage exactly the same. I am currently selecting it, jotting down its x and y position, then dragging it out from library onto the new layer and setting it to these coordinates, but if I could do this another quicker way, as I have quite a few to do, it would make life easier.
View 3 RepliesOk, I know layers dont exist once compiled and that duplicated movieclips cannot be duplicated to new levels but I need some kind of work around here.
I cannot use the library as the movieclip I am duplicating is dynamically generated by actionscript (a graph based on user input over time) and thus cannot be made by me beforehand as it varies.
I need to somehow make a duplicate of this on a layer above the where the original was made, anyone know how this is possible?
Lets say i use the code below to add the player movieclip into the gamelevel instance.
gamelevel.addChild(player);
When the player movieclip is added it is 'on top' or infront of the gamelevel instance.
Now i know you can simply move a particular instance back to the front with the addChild() function. However since i am adding Player1 into the gamelevel instance, this does simply nothing.
How can i add the player into a particular layer in the gamelelve instance?
I was wondering, in flash MX, if there was any way to treat one whole layer as a movie clip. It would just be much easier for me if it was possible to do this.
View 0 RepliesI've read that it's easier to simply put all the actions that you will be using on one layer of the whole .fla, so it will be easier to configure and change settings. Well I've been trying to do that, and I'm kinda new at it, like I can get around with putting actions on movieclips, but now since I've started doing it this way, I've had some troubles... For example
ActionScript Code:
player_mc.onLoad = function(){
playerSpeed = 5;
playerHealth = 50;
player_mc.onEnterFrame = function(){
if(Key.isDown(Key.LEFT)){
[Code] .....
That's simply a character moving script, but it doesn't seem to be working for me, and I think it's because it's on the Actions layer and not on the movieclip...
I'm very new to Flash and after searching for a solution to looping a layer I understand this is best done by creating a new Movie Clip and creating the animation to be looped here. I've done this, and then placed the Movie Clip into a layer on the Scene... but it just won't play at all. It acts like I've placed just the symbol that shows in frame 1 of the Movie Clip and it remains static.
View 3 RepliesI wanted to create a rain movieclip with the actionscript below, but i wanted the rain to appear at the back of a layer. How do i change the script?
//Creating an empty movieclip to attach the clip from library
_root.spring_mc.rain_mc.createEmptyMovieClip("hold er",this.getNextHighestDepth(0));
//settig variables
[code]......
I'm trying to get a movie clip to follow a guide layer using action script.
one thing that i have to do is "Create a movieclip and put it on a guide layer. Have it go along the path."
I have an movieclip on stage, and its' instance name is called "mc_mask".In my actionscript, I will create a bitmap that will be added to stage with addChild(). How do I add the bitmap behide the mc_mask?
View 8 RepliesI am currently working on a platformer, and I have a bunch of different tiles I use to form my maps with. These tiles are very different in the looks, and placed besides eachother, they give a very sharp change, which is not very visually appealing. I've been trying to fix this in the following way:
I have four layers, two for each block I'm fading. The first layer is where the actual tile, the graphic, is located. The second layer is the mask. In the mask layer, I have a gradient, which is the exact opposite of the other tiles mask layer (Mask layer 1 goes down, mask layer 2 goes up). However, I need to be able to alter those dynamically, place new gradients in the appropriate mask layer, and new tiles in the appropriate graphics layer.
I've been googling around for the last hour or so, attempting to find a way to define which layer a new MovieClip is placed on, but all I've found is setChildIndex, which, since one layer acts as a mask, I can't use. Is there any such function in Actionscript, or am I to make all combinations of tiles by hand?
I'm trying to get a movie clip to follow a guide layer using action script. One thing that I have to do is "Create a movieclip and put it on a guide layer. Have it go along the path."
View 1 RepliesI don't think Flash is seeing my movie clip grid that I placed on the GRID Layer. When I check syntax it doesn't find anything wrong, when I go to debug in Flash it shows the grid even though I thought I have it set to visible=false. When I set it to true and debug the code it shows the grid as well. When I try to test it in Scaleform for UDK as well, the cursor acts as it should however the grid is invisible, when I change the code for the grid to be visible it still doesn't show up. I provided a screen shot of the entire screen. with as much information I could think of to show including the entire AS code.
Below is the AS code as well. I am using AS2 code.
ActionScript Code:
_global.gfxExtensions = true;
import flash.external.ExternalInterface;
Mouse.hide();
startDrag(cursor, true);
var mouseListener:Object = new Object();
[Code] .....