I've been trying to detect the number of lines used in a dynamic textfield without any luck. I have tried using the scroll property of a field which didn't work (Find my attempt attached)
View 4 RepliesThis one is for all the TextField wizards out there. I have a text field that displays 2 paragraphs of texts. The first one I want to be truncated to show only 3 lines of text maximum. The 2nd paragraph is to be appended to that text.
Is there a way I can show only the first 3 lines of the first paragraph? Think of it like an abstract for an article for the first paragraph.
I tried doing it with String.subStr(0, guestimate of 3 lines of chars) but it's pretty inconsistent in that some strings will take up 4 lines of the textfield.
I thought about doing 2 separate textfields but in the case of the first paragraph having only 1 line worth of chars, there will be gap of 2 lines worth of chars between the 2nd paragraph.
The stage width is 300px. I have the TextField for Question, wrapped set to true, so that if the Question is long it will continue to second line.Now the problem is i need to show options as radio buttons, say 10px below, where the question ends. But since i don't know the question consisted of two lines or one line, it becomes difficult for me to place the radio buttons programatically.How do i get the number of lines for a text field?
questionField = new TextField();
questionField.text = question;
questionField.width =280;
[code].....
How to detect the no of lines in dynamic of input textfield at runtime in as3 if wordwrap is set to true
View 1 RepliesIs there a max number of lines that can be displayed in a textfield?
I have a tf that is just cutting off text being pushed into it when it goes over a certain number of lines.
I have a textfield that acts as a log in that it routinely gets messages added to it. I want to limit the number of lines the textfield can display - that is, if the textfield exceeds a certain amount of lines, the oldest lines that were added are removed and the rest of the lines of text are shifted up. Basically I'm wondering if there is a cleaner way to do this, as my technique seems inefficient:
Code:
const MAX_LOG_LINES:int = 50;
// assuming parameter message is a string that ends in to add a line break.
function addText(message:String):void
[Code]....
is it possible to count the number of lines in a dynamic textfield?
View 1 RepliesIs there a way to hide partially shown text lines on a dynamic textfield that has more text than its size can hold? I want to avoid the situation found on the picture below by simply not showing the areas in red (the text comes from lots of sources, so I don't have control over it).
View 2 RepliesI have a simple dynamic textfield with the variable name total_txt. Why am I getting an error with this code?
Code:
var myNum:Number = 0.00;
total_txt.text = myNum;
I'm assuming it's because the textfield is only wanting to read a string and not a number, but how do I output a number to a dynamic textfield?
If there a quick way code wise of getting a dynamic textfield to count upwards to a specific number?
i.e. I have a global variable named: _global.num and this equals 30 and I want it to count from 0 to 30 quite quickly.
I would like to know is there any limitations in flash textarea like the number of lines it can have or the number of bytes it can have. iam opening a text file using php in textarea, where all the contents of the files are not getting loaded in the textarea. If it is there then how to increase its size, is it same thing in flex?
View 1 RepliesI am looking to create a drawing component on a site. that should be straight forward.the issue lies with the fact that I would want to detect any collisions say (4) and then attach MC's to the collision points.in a nut shell.can I get a trace of the drawn path on the stage?????from there I guess I can detect any positional similarities?
View 8 RepliesHere is a snippet of code that will be useful for breaking text apart into individual textFields for each line.
Code:
//create a textField to break apart
var breakTF:TextField = new TextField();
[code]....
I have an animation that reads some info from a txt file (such a bkg color, bkg image and text). So I would like to make my main animation in the root to repeate a segment of the animation (beteween 50 and 80 frame) or to loop an MC so many times like the number of lines in this txt file.
For exapmle if I have in my txt 6 lines to go from 50 to 80 frames, that again to 50 and like this 6 times (e.g. to repeat this segment 6 times)
I have a text box with text in.
how I extract X number of lines?
I'm loading a few bits of text into a dynamic textbox and I want to know if it's possible to find out the number of lines its taking up. Using the height of the textbox isn't an option as the text varies all the time.
View 1 RepliesI have an animation that reads some info from a txt file (such a bkg color, bkg image and text). So I would like to make my main animation in the root to repeate a segment of the animation (beteween 50 and 80 frame) or to loop an MC so many times like the number of lines in this txt file.
For exapmle if I have in my txt 6 lines to go from 50 to 80 frames, that again to 50 and like this 6 times (e.g. to repeat this segment 6 times)
I have an automatically generated TextField, that is fixed in its width. To show it in its full heights and not to have the scrollmode active I want to read out an attribute that contains the value of the summed up height of the single lines. Then I want to set the TextField.height to this value, to see the full text at once. Does such an attribute exist in the TextField-Class or do I habe to sum up the height of the single lines by multiplying TextField.numLines * TextField.getLineMetrics().height?
View 1 Repliesis it possible to set a tlf or textfield to a fixed numer of lines for keyboard input?
View 1 RepliesI'm trying to limit the number of lines people can enter in an input textfield. I tried stuff with maxScroll, but that doesn't check if people press enter, so i end up with too many lines of text. I then looked at maxChars, but it's no use either, because users can still enter as many lines as they want.Is there no way you can combine maxChars and maxScroll? there also is "textfield.onScroller" which checks if the textfield is being scrolled. Can't i use an eventhandler based on onScroller? Like:[code]this results in people not being able to edit messages anymore after they reach the end of the textfield.I have no idea how to limit the number of lines in an input textfield. Anyone?
View 7 RepliesI'm working with an input text field that has to contain a max number of characters (90... I set this on the properties panel) and a max number of lines: 6 but i don't know how to set this property.... I've searched, and all I could find was the numLines property, but it doesn't allow to specify the number of lines iI need my text to have...
View 3 RepliesI need to count the number of lines that exists in a txt file, from wich I load some content. I think I need to escape the content of the txt to be able to read the "/n", to count them and to have them displayed as variable (for example t_linenumber=...?)
View 5 RepliesI need to count the number of lines that exists in a txt file, from which I load some content. I think I need to escape the content of the txt to be able to read the "/n", to count them and to have them displayed as variable (for example t_linenumber=...?)
View 5 RepliesThere's only room for three lines of text in the interface, but the content is external and variable, and if it ends up taking up more than three lines, there needs to be some sort of 'view all' button functionality. I can kind of think about what that function needs to look like, but I'm not quite sure what the best way to do it in AS3 would be. Something like (in pseudo code):
[Code]...
I have an app that has text appended to a TextArea (TA). It automatically scrolls to keep the recent line added in view. Over time, this could be a lot. Do I have to worry about this? Is there an upper limit? And, if so, how can I prune the oldest lines of text?
View 1 RepliesI am trying to put together a match activity where word in one column are linked by a line to definitions in another column. Once all words have been linked to their definitions, you end up with a series of crossing lines so, so I want the definitions and their line to move so that each is level with their connected word and the lines have unravelled. I've got as far as connecting the words to their definitions using a line (as a sprite) and the definitions can then be moved using tweenlite -but I have no idea how I move the lines with their definition. Here is a much simplified section of code to give you an idea of what I am trying to do
import com.greensock.*;
import com.greensock.easing.*;
var wordArray:Array = [word1, word2, word3, word4];
[code].......
I can't seem to figure out the .numLines property. I've tried calling it on a TextField that was created dynamically. The TextField has multiline set to true and wordWrap also set to true. Any clue why it would consistantly report the number 1? It's being called in a trace statement after the htmlText is set to a string from a xml file.
View 3 RepliesI have some HTML loaded from an XML document that includes web links (anchor tags). I am using a TextField object to display the text, and am plugging the XML data into the htmlText property of the TextField, and the text is rendering with HTML markup, links are working etc.
The problem I'm seeing is that a new line is created before and after the link, so html like this:
hello world <a href ="#">this is a link</a> and all of this should be on the same line.
is rendered like this (with specific attention paid to the new lines): Does anyone know of a way to prevent these new lines from appearing when using HTML links within a TextField?
it is possible to change text styles of single words or lines within a textfield with actionscript. I use an empty textfield and add my text to that field in actionscript with the following code:
myTfield.text = "insert text here"
the text contains multiple lines and I want some of them to be bold, italic or a bigger font size. The reason why I am adding my text to my textfield this way is because I need the text in the textfield to change when some buttons are pressed. Text will be added or removed from the textfield if buttons are pressed by the user and the current way I'm changing the text is by simply re-using the code above with new text in it. (it makes the code quite long though, but I guess I'll have to deal with that)But because I'm adding text this way I am not sure how to change the style of different parts of the text.
On a related note, with CS5 there are now a number of options for textfields. There is TLF text and classic text. I've searched around for the differences but I don't find the awnsers very clear. What option should I use for my textfield if I want it to look sharp like the text I'm typing here (its just regular text, no headers or anything). Some options just give blurry text because of the anti-alias and some settings don't seem to change a thing. And at times embedding fonts looks nice but sometimes it makes it worse. There are so many options to choose from, but it is unclear what would work best for regular text. (my text won't animate, it does move with a scrollbar, but I only care about how it looks when the scrollbar is still)
is there a way to limit the user from entering more than lets say 4 lines in an input textfield?
View 8 Replies