I created a flash menu with a rollover mask, so that the right images appear when rolled over. (Look at the attached file).But I was wondering if it where possible for the mask to only be activated when the mouse is within the flash movie. So if the mouse is not in the movie, i do not want any of the text to be shown.url...
View 3 Repliesmake a roll over and roll out? with roll out appear image and with roll over disable
[Code]...
I want to get rid of the typical Flex roll-over color in list-based components, and to display my own style of roll-over rendering. Setting useRollOver to 'false' is not an option, since disabling that will also make the List.isItemHighlighted() function to always return false. My custom renderer relies on that function. Can it be so hard? Is there no way of setting that roll-over color to transparent? Is there some other way for my renderer to figure out if an item is highlighted?
View 3 RepliesI am making a sniper game and I want you to be able to zoom in through the scope using the mask effect, but then i want you to be able to zoom out again. I know how to create the mask with actionscript but how do you disable the mask?
View 3 RepliesAnyone know of a way to disable the mask within the scrollPane component?
View 8 RepliesIm trying to get a movieClip to change its tint on roll over and back to normal on roll out. But this has to happen gradually like a tween. Im trying to use the code for alpha tween but its not exectly i also tried the tweenlite but im to confused :S here is my code:
[Code]...
I want to create a button that toggles but has a roll over, roll out and click animation. Anyone willing to point me in the direction I need to be so that I can achieve this. I can create the roll over and roll out animation for the buttons but then how could I toggle between the two buttons. Ultimately this is for a start and stop situation. I want when I roll over the button for it to have a transition then click and it toggles to the alternate button with animation. I have been tackling this now for a week and with no success. So far I have found ways to toggle but loose the animation or vice verse.
View 4 Repliesi've been trying to code a small variation into the normal roll over roll out animations... i want the animation to stay on the last frame once i click the button. but when i put the code in it dosent even bother playing the rollover/out animations it just goes to the end frame...
Code:
stop();
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
[code]....
So I have a menu that fades in on a movie clip rollover. It fades out when the mouse rolls out over a 'hit area' mc. All is working fine except when you move fast off the hit area. Sometimes the fade in menu remains up when the mouse should have traveled over the hit area and told it to fade out... any reccomendations to remedy this?
View 3 RepliesButton class:
[Code]...
The Roll Over and Roll Out State isn't working.
I have MovieClip A on stage, that when the user rolls over it another MovieClip (B) is added above it to the stage (it's not added as a child of Movieclip A). Now, when the user rolls over this newly added clip, it triggers the roll out event of the clip 'below' it. So, how can I prevent this from happening ?Basically, it's a movieclip that displays a button when rolled over and hides it when rolled out. I need the roll out NOT to be triggered when the user rolls over movieclip B.
View 6 RepliesI just want to design a button when the mouse roll over the button will gradually become larger (to a fixed size) and gradually comes to the originally size when roll out. I try to use "Adding Buttons to Movie Clips" method, ie, one MC with two layers, an amimation MC (tween from small to big and then big to small) and a button. Add script as follows:
on the first frame:
if (Playing eq "True") {
play ();
} else {[code]....
When I roll over the MC tween small to big and big to small and when roll out the MC gradually small. What I want is when I roll over the MC tween small to big and keep it is except when I roll out.
I have a graphic that when rolled over it starts a movie clip, when rolled out or off I would like the clip to instead of stop actually roll the movie back whether the clip is at the end or not. Like an animated button I would guess.
View 1 Replieson (rollOver) { gotoAndPlay(2);}on (releaseOutside, rollOut) { gotoAndPlay(11);}
i am using this this scrip in flash 8 scrip 2
and i want to use in flashcs5 script3
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 RepliesI have two buttons in my flex app next to each other, ButtonA and ButtonB. When the user does a mouse roll-over on any of the two buttons, I want the roll-over skin (overSkin) to show on both buttons, i.e. Button A and Button B. I tried to do it using this when user rolled over Button B:
ButtonA.dispatchEvent(new MouseEvent(MouseEvent.ROLL_OVER));
and then when the user rolled out of Button B I do:
ButtonA.dispatchEvent(new MouseEvent(MouseEvent.ROLL_OUT));
Button I cannot do the same on Button A when the user rolls in/out. It causes an infinite loop resulting in stack overflow.
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 RepliesI have basic movie clips, On roll over, show arrows [NEXT, PREVIOUS] on movie clip [they then show other images inside movie clips]I can show arrows on roll over.But when i roll over the arrows the main ROLLOUT function gets called, the arrows hide. I've tried several flagging methods and have resulted in using a larger invisible border around the clip, rolling over that hides them.
View 1 RepliesIm struggling to get anywhere with this which i assume is simple :swhen i enter a page it rolls in with a animation, and when i press any other main nav button it rolls out (reversed animation) of current page and then plays (rolls in) with the new page.Ive got all my buttons going to relevant pages but not sure about the reverse animation bit ?
View 1 RepliesI have a startDrag function set up on a loader and mask that when the mouse is down on the loader it drags, when not it doesn't. There is also 2 buttons that control whether mask1 or mask2 is used. What i would like however is when the mouse is down - the area of the loader outside of the mask is visible but only by about 10/20% alpha, that way the user can see where all the image is while dragging. Is this possible? Full code can be seen below and i have attached the zip with the .fla file:
[Code]...
what i am doing is to make something along the lines of the "scriptable mask" tutorial Inigo was kind enough to put up.My idea is to have a large mask behind the whole of my flash site, this masks a colour image with a black & white one (nothing tricky). The image I am using is actually 5 separate images combined, and each is a pic of certain parts of the site.I also have a very basic set of buttons along the bottom... each corresponding to each section.
All I want is to set it up so that when I mouse over the buttons, the _x of the mask moves to correspond with the correct image... really very basic... or so I thought .If anything it should be easier to do than what is in Inigo's tut (where he uses the _x of the mouse to move the mask)... i just cant seem to get it to work with a nice easing effect (its easy to get the mask to simply snap to each coordinate, but I need it to smoothly move).
maybe point me towards a better way to mask. png file is way too big. I have been using the mask layer option to create my own mask around a jpg image by drawing around it on the mask layer. There has to be a fetter and faster way to do this. Is it possible to maybe have a specific color range have an alpha value of 0. Similar to green screening whereas If I put the item I want to clip on a green background flash will auto take out the green for me. and by auto I mean action script maybe. I think this can be done but im not finding it.
how are these guys clipping these images [URL] they have the movie clips set up where the black background on the 3 layers of shoes is getting masked out. When I go into the shoe movie clips I see there is a black background but it just disappears when I go back to main timeline.
ive gotten one movie clip to mask another in the actions frame but i cant seem to be able to mask the flames which are a shape with a movieclip in this as file. im not getting any errors but the mask isnt covering anything look near the bottom at s.mask=mask_mc; there are about 20 "s" shapes spawning per second if that has anything to do with it
Code:
//this package turns an mc into a flaming button that calls a javascript function
package
{
import flash.display.MovieClip;
[Code].....
I was wondering if its possible to mask multiple MC or Sprites under one mask, when using AS3.abc.mask = a;cba.mask = a;something like that
View 2 RepliesI have 3 buttons going around in a circle, in the middle of this circle I want a specific image to fade in for each button when you roll across it then fade out when you move off the button. I also want the button itself to change colour slightly when you roll across it. I've not had much look so far without the use of actionscript, but even with using it I'm not getting very far, I also seem to have a problem where once I have an image appear on the rollover of abutton that the image becomes part of the button, ie instead of the image just appearin when you roll over the button it appears when you roll over where the image should be appearing.
View 1 RepliesI am trying to use a rollover or a click effect on a button placed in a time line. The button is in a different layer to the running time line. When I go in to up, over down, hit and insert a new frame there when the movie runs the button just flicks back and forwards continually.
How can I get the button to switch over only when I roll over or click it?
I have 10 square color movieclips and I want whe rollover on one another 3 kinda rollover too and do this for all the movies clips. When rollover on b1 i want the b2 b3 and b4 to appear darker too. When roll over on b2 I want the b1 b3 and b4 roll over darker too.
View 2 Repliescreating a roll-over effect where he sprinkles dust from his fingers (As in, he actually moves his fingers and dust falls)?
View 1 RepliesOKay, I have a drop down menu. Around the menu I have a button surrounding the outside, so when I roll away from the drop down menu and roll over the outline button, it is coded with action script to make the drop down menu fade away.
View 6 Repliescan some body can past action script 3 of roll out and image appears and on roll over image go away or go to fram ecc..
View 2 Replies