ActionScript 2.0 :: Flash To Php - Functions From GET To POST - Not Working
Jan 20, 2007
The form is inside a flash site. the actionscript on the "submit" button is as follows:
[Code].....
I have been up now for 30 hours trying to figure this out and my wife is complaining that my eyes are getting bloodshot. I've played with every variation of these codes as i could think of. Changed all the variable names, changed functions from GET to POST, removed the HTML to simplify the php... nothing works... what am i missing?
I have a problem with the following code:[code]The problem is that the code is working when I test the scene (ctr+alt+enter in flash), but after I publish it it doesn't work... not sending any request nor redirect.What I want to do is to log in a file on the server what the users typed (related with Related with: Flash actionscript - save a text file on server).
This is the code am using to create a mp3 player,everything is fine but the volume controls,not able to mute or increase the volume,kindly tell whats wrong in the code
I have these two functions which both happen on an onEnterFrame event;"basichittest" and "photo". They each work by themselves, but not together.I attached the fla file.I commented out lines 6-10 and line 58.I want the red dot "photodetector" to get brighter as the mirror slides to the right. I also want the beams of light to bounce back and forth when the drag happens.If I uncomment the offending code, the beams no longer bounce, but the dot behaves the way I want.
I have these two functions which both happen on an onEnterFrame event;"basichittest" and "photo". They each work by themselves, but not together
I attached the fla file
I commented out lines 6-10 and line 58.
I want the red dot "photodetector" to get brighter as the mirror slides to the right. I also want the beams of light to bounce back and forth when the drag happens.If I uncomment the offending code, the beams no longer bounce, but the dot behaves the way I want.Can I only have one function on enter frame?
Im building a reservation form, using actionscript and php. I use sendAndLoad to send variables to php via POST, which returns a different HTTP POST response in case of sucess or not.
Is there anyway to "read" HTTP POST responses with actionscript?
I have these little menu tags which move down when you roll over them. Then, if you click one, it stays down. Then the other menu tags move down when you roll over them, until you click one, at which point the previous tab moves back to original position. (I'm sure that makes little to no sense... so look here: [URL]. Anyway, it works great for the first couple of seconds, then after a while (especially after a click) some of the menu's don't return to their previous position. My fla is attached, but here is my script.
I have two functions that work individually, but not together because they're both onEnterFrame functions for the same mc (which is not possible).
Here's the code from the mc "A" class file: Code: function onEnterFrame(){ removeA(); connectT(); }
This works until the next function runs... function removeA(){ if (this._x < 500){ removeMovieClip(this); }} var strandID:Number function connectT() { [Code] .....
Explanation of code: mc "A" hits "strandT" and the two move together across the screen. Mc "A" needs to disappear when it hits x = 500.
I initially posted this in the AS3 NEWBY forum but I think it probably belongs here. On stage I have 5 boxes, the letter A and two buttons labelled button1 and button2. The letter A is also defined as a button labelled AA_btn. When I click on button1 I want a condition to be set so that if the letter A is clicked, boxes 2 and 4 will disappear. Conversly if I click on button2 I want boxes 1, 3 and 5 to disappear. To do this I have nested the letter A and B functions under the button1 and button2 functions.
I also have a reset button which resets the display of all five boxes back to their original display.Everything works fine when I press Button1 to set the first scenario. When I then click on the letter A boxes 2 and 4 disappear. (perfect). Everything also seems to work when I press the reset button, ie: all five boxes reappear.
I'm having a problem with PC applications. Notably, the keypress command no longer working when my app is fullscreen. It works just fine on Mac, but bugs out and doesnt recognize and of my KeyPress actions when fullscreen. When its not fullscreen, it works. I dont know what to do, as i need my apps to play fullscreen on both pc and mac.
I have a serious situation regarding the onRelease Funciton not working properly.I have a FVLplayback componant inside a flash project inside a movie clip. Inside that movie clip I have two layers, One for actionscript and and the other for the actual component which contains instance name of 'myPlayer' (without quotes)[code]That cameraRoll is the instance name of another movie clip I have located in the movie clip as shown in path above. Inside that movie I have rollover, Rollout effects. The actionscipt is in an invisible button right on top of the objects. The actionscript is:[code]The objective: the movieclip to carry out the rollover Rollout effect and to have the function that will start the video.The Problem: When I run the flash project, it does the effect but won't start the video. If i move things around, I can have the video start playing but then the button won't do the rollOver, RollOut effects.
-the path to the video component:-root.menu.video
-the path to the movie clip taht contains the timeframes for rollOver/rollOut effects )which contains invisible button on top of everything. root. menu.cameraRoll
I'm putting together a pretty basic website/portfolio. The buttons/code that go from page to page work great. The code I'm using to access larger images from thumbnails is basically the same, however it's not working.I have the site setup so that each larger image is it's own separate page, so basically the thumbnails act as buttons to access a specifically labeled page. Ex- Thumbnail/button "Character1_btn" goes to the page labeled as "Character1" to display the larger image. I hope this makes sense.Below is the code I'm using. As I said- all functions but the character1 function are working properly.. I really need the character 1 function to work.Quote:
stop (); home_btn.addEventListener(MouseEvent.CLICK,playhom e); function playhome(event:MouseEvent):void{
post the code for a working cross-domain securityfile that allows access only from the same domain as all the flashfiles and xml files are in?used to be easy in as2 but i think i dont know what i need to know about it in as3..
I have problems with facebook application based on flash which communicate with PHP using FBJS-bridge.When someone use the application for the first time, he/she is asked for various permissions. After that, flash contact PHP with ajax but request is never sent. When you refresh page, everything is working without any problems.If you remove the application on privacy settings, refresh the page and try again -same bug happens.If you allow application, refresh page, in other tab remove application and start application in previous tab - user is asked for permissions but everything is working after allowing application.This is FBJS code
function openPermissions(){ Facebook.showPermissionDialog(/*permissions string*/, permissionOnDone);[code]......
openPermissions is called to display permission dialog, and on allow flash function allow() is called. In flash, allow() calls JS function ajaxCall(), which should make ajax request. But, ajax.post never sends request. I know that for sure, because flash function parseAjax was never called and also debugging tools in browsers are not showing any ajax requests. URL and parameters are same as when it is working. No flash or JS errors are detected...
For some reason I can't get this nested set of functions to work, it executes the first tween and the tween invoked after motion of the first is finished but it doesn't ever get to the third!
ActionScript Code: var t1:Tween=new Tween(p1,"rotationY",Strong.easeOut,90,0,50,false); var t1x:Tween=new Tween(p1,"x",Strong.easeOut,-900,0,50,false); t1.addEventListener(TweenEvent.MOTION_FINISH,onMotionFinished);
created a .swf that continously scrolls with a pause and play button with only actionscript. The file was too large so I created a preloader in a seperate file loading the .swf with loadClip, but the buttons on the .swf stopped working! What do I need to do to get the buttons working again? I'm completely baffled.
I have one function that for some reason, isn't calling the next function. I've been looking over this code all day and I feel like it's probably going to be something really small and stupid but I jsut really need help at this point. The function that isn't working is showUsers().
i've got this movie clip. I've loaded a swf called "page1.swf" into a holder called "page1MC". This child movie DID have a button in it called "page1_buttonA" in it when I made it, but I can't get it to do anything once I've loaded it. I recently discovered you can trace movie clips, and the trace below is coming up undefined, which might explain why it's not working. Now, can anyone explain WHY it's coming up undefined?
The code for the entirety of this debacle is as follows:
stop(); //Create empty movie clip holder: this.createEmptyMovieClip("page1MC",1); page1MC._x =0;
[code]....
I'm a mostly self-taught actionscript hatchet-artist, so there's a HUGE chance I'm missing something obvious because my knowledge is completely unstructured with large gaps where much foundational learning should be.
When I press the button nothing happens, but when I remove the attach code and just put the button on the stage with the appropriate instance name it does work.
I'm writing in a programming language, that is then passing variables to PHP, and I then need Flash to pick those variables up and do something with their data. Is there a way to get PHP to post into flash? rather than having flash load variables from a static page? If not what would the best option be? a text file?
Example of code which would be used to send a bunch of variables to a PHP script via flashThis would require the PHP script to load when the data is sent.I want to use this for a Flash event calender which triggers more information about the event to appear in a HTML area of the page when an event is clicked on. The PHP file would be the same file that the SWF is embeded in so the FLASH file would reload the page with the variable sent to the PHP. The PHP would use this variable to select the right content from a MySQL database.