I need to make an swf file. This will show the xml data. XML data has to be updated after every 1-2 minute. The swf file has not to be loaded again and again.
View 2 RepliesI have a flash file that is 1.5mb in size. As it takes about 6 minutes for someone on dialup to load this file, I have created a smaller swf file and loaded the larger one from it but I don't want the larger one to begin to play until it's fully downloaded. How do I set this up? I have set up the action script 2 as follows: loadMovieNum("top2.swf", 0);
View 7 RepliesIs it possible to control one loaded SWF File eg.(MOVIE-1.swf) from another loaded SWF file eg.(MOVIE-0.swf) on a different level? eg. with a syntax like:
onRelease
_MOVIE-1.SWF.gotoAndStop (4)
or:
onRelease
gotoAndStop (MOVIE-1.swf, frame4)
I've built a site at [URL]. I'm getting a white panel where a flash swf should be loading. I'm using Dreamweaver to place the flash movie in a template for the pages.
View 1 RepliesI have an xml file which is loaded into flash - all is fine. One of the nodes has some information text, and within this text I have a url; flash doesn't seem to render the url tho.
[Code]...
What is the largest XML file that can be loaded into flash? I have a 14MB XML file that I'm trying to load into flash. It gets to the listener function that listens for the Event.COMPLETE event fine, but in there when I try to set e.target.data to an XML variable I get an error that says one of the tags doesnt have an ending. I know for a fact that it is a well-formed document. So I'm assuming it's cutting some of it off. Is there a size limit for xml files?
View 3 RepliesI'm loading an swf file into my main application using URLLoader, I want to get the background color of the loaded swf file. ( I heard that one solution wold be reading the byte code of the loaded swf )
View 2 Repliesis there a way to write a program in php or javascript that can load a flash file and interact with it? (click on buttons and such)
View 4 RepliesI have loaded a model using the 3DS parser that is already linked to a material and loads fine. I would like to make this model semi-transparent part of the time but not all of the time. I would like to just set alpha = .5 but when I target the materal that is not an option.
Here is the code and using:
var slingPar:Max3DSParser = new Max3DSParser();
var slingLoader:Loader3D = new Loader3D();
sling = new ObjectContainer3D();
[Code]...
Im trying to make a slideshow in flash, but i want to be able to change the pictures in the flash file, by just uploading new ones to a FTP server, with the right names and resolution..
View 3 RepliesI'm working on my first Flash project, and for my preloader I'd like to do a really simple gradient based on the percentage loaded. The preloader says "77% loaded...", where the number 77 is a dynamic text instance called percentLoaded. I'd like the textColor of percentLoaded to change on a gradient from #000000 to #FFFFFF, in gray-scale.Therefore, I can't simply do:percentLoaded.textColor=(currentValue/100)*0xFFFFFF;This just converts the textColor to a multiple of FFFFFF, but outputs a color since it's not three separate components. Currently, here's what I've got:
View 4 RepliesHow can be cloned shape loaded by Flex Action Script 3 from external swf (authored in the Flash CS4)?
View 3 RepliesI am trying to resize a swf file that is loaded into a loader_mc clip. I have tested this in two ways so far:
load_mc.loadMovie(swfUrl);
load_mc._width=210;
load_mc._yscale=175;
Soon as I do this though, the swf does not load. I can do it like this however, but it does not use _width, which is what I need.[URL]..
I am trying to access a button inside an external swf file that I loaded. Problem is every time I try to access this button I get an error saying that it's null!
Here is my code:
public class DocumentClass extends Sprite
{
public var loader:Loader;
public var swfFile:URLRequest;
[Code].....
Now this should work, code-wise I think its correct. The problem is that loader cant find the required button. There is indeed a button in the loaded movieClip with an instance name of "button", I double checked that.
[URL] basically i was just a layer too high and this is why i couldn't access anything..
How do I get to the MovieClips within an externally loaded Movie Clip. Lets say I have a movie Called ONE in the swf I just loaded. How can I work with it alpha, position and other properties of the children of this clip? CODE IN MAIN TIMLINE:
[Code]...
Now its loaded I want to change the postino of the clip called ONE in the movie LoadedMC I just created.
I currently pull an html file into our site via iframe. (due to various factors, I cannot host the information in the html on our site and need to host it elsewhere). Is it possible to use a loader or other method to pull this information into flash?
View 2 Repliesi have a test website here which has externally loaded files coming into the container on the main index page. the code on the buttons at the top right hand corner have this code on each of them for the externally loaded .swf files to come in:
on (release) {
if (_root.currMovie == undefined) {
_root.currMovie = "contact";
container.loadMovie("contact.swf");
[code].....
and that all works perfectly fine. what my problem is is when i click on the "contact" button and i'm on that page. on the left hand side column towards the bottom, i have a block of text with one red word. i want that word to bring in the f.a.q. page (and replace the contact page i'm currently looking at) which can also be accessed from the top nav. just a little thing, but i wanted to learn how to do it.
i've put the same code into the invisible button that says "faq" which is identical to the code listed above except i changed all instances of "_root" to "_parent" but that didn't do it. i think it's something like that that would have to do with the problem.
I have a preloader.swf that loads another swf (main.swf). It all works fine, however I would like the loading bar to stay on 100 (once it gets there) for 2-3 seconds before the main.swf opens, currently as expected from the code below, as soon as it gets to 100% it flicks straight over to the main.swf.
I am using tweener, and I could achieve this easily using the onComplete code to call this.addChild(loader);, however, the problem is, both my preloader and my main swf are liquid layouts, and if I were to call the this.addChild(loader); at the end in its own function, then it throws a
TypeError: Error #1009: Cannot access a property or method of a null object reference.
. The only way to get around this error is to put the this.addChild(loader); so that it loads upfront. After a bit of google research, i found this error occurs due to the stage properties already been set in the preloader.swf (from liquid layout)then once the main.swf loads it tries to set them again...So is there another way i can cause a delay for 2-3 seconds once my preloader hits 100?
Below is my preloader code with liquid layout settings
Code:
//LIQUID LAYOUT
stage.align=StageAlign.TOP_LEFT;
stage.scaleMode=StageScaleMode.NO_SCALE;
stage.addEventListener(Event.RESIZE, resizeHandlerLoading);
[Code]....
1. using my tweener onComplete method and fixing the error caused by preexisting stage properties
2. Thinking of an alternate way to delay the main.swf from opening straight away (keeping in mind that this.addChild(loader); would need to stay where it is...
PS - here is a link to a person who was getting the #1009 error with preloader and liquid layout, their solution works, but won't allow me to use a tweener delay...[URL]
everytime I look for ways of sending back to XML changes produced in Flash, the tutorial always assume that we are using a server. Is there a way for having a Flash projector that everytime it starts 1-checks for data to load to the projector 2- lets us do changes to data (add, change and remove xml data) 3- and in the end we can save the changes made to the XML file that was initially loaded?
View 3 Replieshave a text file that is loaded into my flash and it gives the image number to be pulled into the mc (ImageId).
Actionscript Code:
ImageId.text = this.ImageId
On the next frame I have the following code:
[code].....
I was wondering if there is a way to make the actual stage dynamic to the content loaded in the flash file.
Firstly the method I am using is importing a external swf to the stage into a container called container. The main stage, lets call it index, is still on default size, and I want this to expand dynamically as content is loaded in. page1 may be 900px width, page2 may be 500px width, and as I load the content the index stage should expand the width to that of the page loaded. Some steps I have tried but did not work.
if page1 button is pressed stage.stageHeight = 900; - not working (how do I set stage size in as3)made a movieclip in page 1 spanning the page size and called it p1_stage so I can reference the data from there. trace(container.p1_stage.height); gives this error: TypeError: Error #1010: A term is undefined and has no properties. at index_fla::MainTimeline/frame1()
I'm building a flash movie for something at work and im loading in some images using an XML file but when i use a preloader it only preloads the XML file (as in just the text inside) and not the images.
This causes the movie to start playing without having the images loaded.Does anyone have any ideas about how i could get it to preload the contents/images being called in the XML file so it doesn't run as soon as the XML file is loaded.
I will try to be as clear as I can. I have an existing swf file that I want to add Play,Pause, FF and Rewind via an externally loaded swf file that has the controls contained in it.I am loading an external swf file that has all of the controls on it via this code:
// Set up the Mouse to use a listener
var mouseListener = new Object();
Mouse.addListener(mouseListener);
[code].....
I have an existing swf file that I want to add Play,Pause, FF and Rewind via an externally loaded swf file that has the controls contained in it.
I am loading an external swf file that has all of the controls on it via this code:
// Set up the Mouse to use a listener
var mouseListener = new Object();
Mouse.addListener(mouseListener);
[Code]....
I am doing this so I can rollover the viewing window and have it appear. I cannot get any code to work to control the timeline (which is broken down into sections with individual MC's in each section.
What I am looking for is the code to apply to the buttons on the external swf file that has the controls to control the playing of the movie.
I load a "cal" swf file in another swf files mdi_window. So the window is moveable inside the application. The issue is with the x y axis for the popups that open up in cal swf. The code for the function that opens popup is:
[CODE]...
The x & y axis of the popup act wired based on the location of the mdi_window in which the Cal.swf is being loaded. The x & y axis work fine if I move the mdi_window all the way on the top left corner of the application. The first image shows how the popup opens when I double-click on the 10:00 AM purple color event on my calendar.
and now when I move my window the popup moves to the side as well. I clicked on the same 10:00Am purple event again here: How can I solve this issue.
I've got a loadVars function, but I want to use the variables from the loaded file elsewhere in the file.[code]
View 1 RepliesSince I'm not fully proficient (or barely) on correct terminology, I'm including the proof site early in this discussion.[URL] I have created a floating arrow in Flash CS3; it follows the mouse as it hovers over the Nav Links. I want the arrow to sit directly on the bar, which is a jpeg loaded into my DWCS3 page.
Currently, the flash file appears to be sitting directly on the nav bar graphic. For the flash file, I've selected Align "Absolute Bottom" and for the Nav Bar Image, I've selected Align "Top" but these two choices don't work.
I want to create a preloader (in flash)(with the "percent-loaded"-thingie) for an external .html file that I want to load. Here's my code:
[Code].....
On the "main" frame" I've put a getURL action on a movieclip. Can this work.???? I'm still new at this and a bit confused?
Im working on a project that has a main swf file associated with the document class. It loads XML that provides the text content for the project, then it loads a swf that contains a font in its library, then it loads the first of several content module swfs. When the font swf has inited, I'm registering its library font with Font.registerFont(), and using it in a TextFormat object. After everything is done, I can add code to the document class to create a text field on the stage of the main swf and format it successfully with the TextFormat object, but when I try to do the same thing inside the loaded content module swf, the text doesn't show up there at all.
View 1 Repliesvery annoying bug.. I load a SWF and monitor the loading progress using
Code:
_swfLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onSwfLoaded);
_swfLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, onSwfProgress);
[code].....