ActionScript 2.0 :: Looping Between Frames If Movie Not Loaded
Apr 11, 2004
The movie is 12 frames long ! I have an action placed in frame no. 11 which says :
if(_framesloaded = 12) {
gotoAndStop(12);
}else{
gotoAndPlay(10);
}
This means that if the movie is not loaded, it will loop between 10 and 11. I have a movie clip on frame no. 10 and frame 11 is empty, this means that, the movieclip (a square) should blink ! Also, the movie when its loaded stops at 11 rather than going to stop at frame no 12 as per the actionscript !
View 1 Replies
Similar Posts:
Oct 20, 2010
I have a .swf that loads into a movie clip in a Flash website. The .swf has all necessary stops to play once and stop once loaded. When tested outside of the movie clip, it does what it should, but once loaded, it loops forever and the speed is faster. How do I make this stop looping? (This only happenes to .swf that were made in CS4, doesn't happen with older .swfs that were made in Macromedia)
View 10 Replies
May 27, 2010
I have a CS5 FLA file with AS 3.0 with the following code for the preloader:
var pct_load:int = Math.round(framesLoaded/totalFrames*100);
if (pct_load == 100) {
play();
[Code]....
The preloader is in the first four frames -- it's just the background photo, a graphic logo, and the loading numeral text.
Everything runs great the first time it's loaded; then if you refresh the page, the graphics in the first four preloader frames flash on the screen before the movie plays.
View 5 Replies
Jul 27, 2005
Is there a way i can tell if cerain amount of frames have been loaded? what i have is actionscripted movement. i have these 2 blocks that cover the area where th emovie should be loaded. i tried
_root.container.loadMovie(section + ".swf");
_root.container.ifFrameLoaded (22)<<<<<<<i think this may be wrong
_root.b1.easeY(560,4,false);
_root.b2.easeY(560,4,false);
cuz i wanna knwo once certian frames on the external movie are loaded, to move the blocks back to a spot you cant seem them
View 2 Replies
Dec 23, 2007
I have a movie clip named "services_mc" it has 7 frames inside of it. When the movie clip gets to frame 7 I want it to go to frame 6 and play (and repeat this infinite).
I thought all I would have to do is put this in frame 7:
gotoAndPlay(6);
but it stops on frame 7.
View 3 Replies
Oct 1, 2010
I have a music track that I want continusuely playing and looping for until my 600 frames stop, then it stops. (by the way my frames/sec is a 1, not 24 like the default). Also it would be nice if in the last 5 seconds it could somehow fade away. How do I do this?
View 3 Replies
Dec 14, 2011
I created an animation in which I'd like to continously loop the last 100 frames of 3 different layers ('baubles continuous' folder), how do I do that?
View 3 Replies
Jan 16, 2009
Im working on a flash website that has an opening page animation that ends at frame 70. From frame 70-1000 I have a slideshow. How can I make the opening animation play once, then play the slideshow, and loop the slideshow only (from frames 70-1000?) I dont want the entire timeline to loop just the few frames that I choose. Is there some actionscript for that? Im using Flash CS3.
View 3 Replies
Apr 26, 2011
I have a character with about 5000 frames of lip sync talking. My problem is getting the character which is a 'fly' to have a constant gentle bounce looping over and over. I can obviously do this with motion tween but doing this with over 5000 frames is a bit counter productive.
View 7 Replies
Dec 4, 2010
How do I code the logic to create a slideshow that plays nextFrame() or prevFrame() using eventListeners for FWD and REW/REV buttons?
[Code]...
View 11 Replies
Jun 29, 2005
I am in the process of making an web page in flash mx 2004. I have a little intro, home page, gallery, contact, etc....now the problem lies within my main buttons which are on everypage which link home and to gallery > so the navigational buttons. Now on the main timeline in flash I have the homepage as the first page then to the gallery. Then the gallery has subgalleries. I gave each button instance names and used that in the action script, I put it on the page frame for each page.
So on the home page I would have put in the action panel :
stop();
gallery_btn.onRelease=function() {
gotoAndPlay(9)
}
Now when I get to the gallery the return home button will go back to the home page frame. The only problem is that when this happens, the audio from the into in the first frame plays. Also in the subgalleries, I changed the frame that the gallery button is supposed to play, so it goes back and plays the gallery, and again plays the audio for the intro. What I think might be happening is that when the button is going back to a previous frame on the timeline, it isplaying the into on the first frame in the background. Another thing I noticed is when all of his started happening, the loading when I was testing the movie, it was loading longer than it should have.
Also, when I go to test my movie i get an output error stating:
**Error** Symbol=body galley, layer=Layer 7, frame=71:Line 1: Statement must appear within on handler
stop();
Total ActionScript Errors: 1 Reported Errors: 1
Now, there is a stop action on that frame, yet the error comes up, ive tried it without the stop();. ive tryied iit in a different layer on the same frame, but i still get the error. and the thing is with this problem, everything in this area works fine in the movie when I test it, so I am not quite sure where it getting that error from.
View 2 Replies
Nov 24, 2011
basically im making a quiz on my main timeline ive got my questions and answers and on the last frame i want it to say how many answers the user got right. ive made a movie clip on this last frame. in the movie clip ive got 11 frames with the posible totals so frame one would be 0/10 frame 2 would be 1/10 etc what i want to do is when the user clicks the correct answer on the other frames i want flash to make the frames within the movie clip to go 1 step forward.
View 2 Replies
Dec 6, 2009
I'm able to control the loaded swf with play and pause buttons. I have another question, and that's how to prevent the loaded swf from looping. I'd like the loaded swf to play to it's last frame and stop I have the following code and it works with an error. I'm assuming the error is coming up because the function is executing before the swf is fully loaded.
var myLoader = new Loader();var myURL:URLRequest = new URLRequest("box.swf");myLoader.load(myURL);addChild(myLoader);
pause_btn.addEventListener(MouseEvent.MOUSE_UP,
[code].......
View 3 Replies
Oct 21, 2010
I have a loaded .swf that has the necesary stops to just play once and stop. It works when testing the movie, but once uploaded to the server, it loops forever, any ideas, I am using ActionScript 2.0
View 1 Replies
Sep 11, 2004
Ok my flash move has a button, On load the flash movie starts playing the sound, but I need it to loop. I dont know where to put the code to make it loop I was wondering
Code:
//Load Streaming mp3 behavior
if (_global.Behaviors == null) {
[code]....
View 1 Replies
Sep 4, 2004
I have brought this up at the end of another thread, but thought it needed it's own.Trying to loop a dynamically loaded mp3 of a cicada.[code] Why does this not work?I understand that the start function isn't needed, as it's a streaming object, but I thought if I added it, it would loop.This syntax is the only way I know to loop a sound object in AS.URL...
View 2 Replies
Nov 22, 2010
how to stop a single movie clip in flash and other movie clips still looping. I tried stop(); and myclipname.stop(); both are not working. I attached a simple file,
View 0 Replies
Jun 29, 2009
I have a bunch of AS2 swfs that I am loading into an AS3 project. These AS2 swfs are powerpoint slides essentially. In my onComplete method, I trace(event.target.content.totalFrames) and I get this error:[code]How can I get the total frames of the SWF in AS3 on an AS2 movie?or alternatively find out when the swf is done playing?
View 4 Replies
Aug 12, 2009
I'm trying to work out the best practices to determine a loaded swfs (via loadMovie()) total frames, then tell the swf file (parent) that has loaded the mentioned swf (child) to play that swf for its total frames. The reason being is that I want to make sure the loaded swfs (children) are played properly all the way through regardless of lag, processor slow down etc. I've got this working but using a setInterval loop which relys on a millisecond variable in an xml file. I want to replace this with an function that does the above.
View 0 Replies
Jun 9, 2009
I have created a looping movie clip which I want playing in the background of my main movie which has multiple scenes. Obviously I cant drop it on the timeline in each scene as then when it skips scenes the movie reloads and there is a jerk on the screen. Is there a piece of actionscript that I can point to my SWF and just have it looping throughout the whole movie?
View 2 Replies
Jul 31, 2009
I'm not sure when it started happening, but I believe after the update my movie keeps looping if I test the movie. This never happened before. I'm not sure what went wrong? I never changed my action script or anything. What can be my problem?
and my stop(); doesn't work
View 2 Replies
Apr 11, 2004
The movie is 12 frames long .I have an action placed in frame no. 11 which says :
if(_framesloaded = 12) {
gotoAndStop(12);
}else{
gotoAndPlay(10);
}
This means that if the movie is not loaded , it will loop between 10 and 11.I have a movie clip on frame no. 10 and frame 11 is empty, this means that , the movie clip (a square ) should blink .Also , the movie when its loaded stops at 11 rather than going to stop at frame no 12 as per the actionscript .
View 1 Replies
Nov 17, 2009
I am having a problem with a looping set of movie clips. The first pass, works as expected, but the second pass only shows the static (original) movieclip that all others were duplicated from.
myArrayXML.load("params.xml");
...bunch of code... this works fine the images come in from xml and do get loaded.
dup_insert = _root.magazine_env.duplicateMovieClip("Mag_insert_ "+i, getNextHighestDepth());
dup_insert.mag_insert.magazine_image.loadMovie(myA rray[i]);
--- however, the movieclip which calls the duplicated movie ---
play();
var myArray = _root.myArray;
var index:Number = this._name.split("_")[1].valueOf();[code].....
Works as long as it passes through the array one time. Once the array starts over and is calling for Mag_insert_1 it presents the original movie clip (everytime it's called). The trace shows the that the name is correctly incrementing, but it still does not show the proper image.Here is a url http:[url].....after the "soul food" image passes by it gets stuck on that image.I want to know what I need to do to get this to work (as in continuously loop).
View 1 Replies
Jan 11, 2010
I have a .flv movie file that I purchased from Istockphoto.com. I have placed it in my Flash CS3 file, and it works fine. However, once it plays, it loops back to the beginning, and I would prefer to loop it at the last 5 seconds of frames, so that it doesn't replay the entire video. Can this be done with Flash actionscripting or do I need to somehow do it in a video editor? Which wouldn't be ideal, as it would make a much larger file size.
View 1 Replies
Apr 23, 2009
I want to loop 5 movie clips so that one clip moves onto the stage, stays there for a certain time, then moves off the stage, then the next one.Here's what I've got so far:
var m1_mc = new m1();
var m2_mc = new m2();
var m3_mc = new m3();[code]......
View 1 Replies
Sep 8, 2009
I've created 5 different movie symbols that move a graphic symbol across the screen at various speeds. I want to create a movie that will play on continuous loop with the graphics moving across the screen with each symbol being generated in staggered time intervals. What I want to avoid is having the stage clear as each loop completes and the next one begins. I've tried to stagger by entering the start times of the movie symbols by entering them at different frames on the timeline, but as soon as the last frame plays, the whole screen clears.
View 4 Replies
Oct 6, 2009
I created a 30 second movie clip. I just want it to stop and display the last frame on the website.
How do I program AS3 to tell it to stop on the last frame and not loop? I don't want it to be blank though, I want the last frame to be visable.
View 1 Replies
Nov 19, 2009
I have been working on looping movies using cs3, but, I can't get it to work on a movie that was made using ASCS2, because of other coding in there, I assume. I am copying and pasting my code, exactly the way I have been using it, but it gets errors. Does anyone know the best way to create a loop in AS 2 so that the timeline repeats 3 times and stops.
View 6 Replies
Jan 6, 2010
I have set up a movie in which i have imported the music. the movie is about 1 min long and music about 3 min. I have imported the music--works great I have set up a mute/unmute button--works great But I want the movie to loop, but not the music. The movie loops naturally at frame 1, but the music starts again while playing the the music from the first loop.
[Code]....
View 2 Replies
Mar 19, 2010
I have a main movie on my site with buttons that display linked movies in the right half of that main movie. One of the movies is the kind that I only want to play through once, then stop. In the FLA file of that linked movie I've put a stop(); action in the final frame, and when played alone it stops accordingly. But when it plays as a linked movie, it continues to loop. What can I do about this? The button script on the movie doing the importing is:
on (press) {gotoAndStop("flash_dev");
flash_mc.loadMovie("cubeintro.swf");
clearInterval(_root.myInterval); }
View 2 Replies
