ActionScript 2.0 :: Flash Webpage - Looping To Previous Frames?
Jun 29, 2005
I am in the process of making an web page in flash mx 2004. I have a little intro, home page, gallery, contact, etc....now the problem lies within my main buttons which are on everypage which link home and to gallery > so the navigational buttons. Now on the main timeline in flash I have the homepage as the first page then to the gallery. Then the gallery has subgalleries. I gave each button instance names and used that in the action script, I put it on the page frame for each page.
So on the home page I would have put in the action panel :
stop();
gallery_btn.onRelease=function() {
gotoAndPlay(9)
}
Now when I get to the gallery the return home button will go back to the home page frame. The only problem is that when this happens, the audio from the into in the first frame plays. Also in the subgalleries, I changed the frame that the gallery button is supposed to play, so it goes back and plays the gallery, and again plays the audio for the intro. What I think might be happening is that when the button is going back to a previous frame on the timeline, it isplaying the into on the first frame in the background. Another thing I noticed is when all of his started happening, the loading when I was testing the movie, it was loading longer than it should have.
Also, when I go to test my movie i get an output error stating:
**Error** Symbol=body galley, layer=Layer 7, frame=71:Line 1: Statement must appear within on handler
stop();
Total ActionScript Errors: 1 Reported Errors: 1
Now, there is a stop action on that frame, yet the error comes up, ive tried it without the stop();. ive tryied iit in a different layer on the same frame, but i still get the error. and the thing is with this problem, everything in this area works fine in the movie when I test it, so I am not quite sure where it getting that error from.
View 2 Replies
Similar Posts:
Oct 12, 2010
I have 5 frames on my timeline. How can I go previous frame and next frame in as3
function prevFrame():void{
gotoAndPlay(previousFrame);
} function nextFrame():void{
gotoAndPlay(nextFrame);
}
View 3 Replies
Dec 14, 2011
I created an animation in which I'd like to continously loop the last 100 frames of 3 different layers ('baubles continuous' folder), how do I do that?
View 3 Replies
Oct 20, 2010
I have a movieclip that contains two frames, each frame contains a different set of buttons.
it seems that i cannot add the event listeners to buttons that are not in my current viewed frame.
so.. problem one: is there a way to add event listeners to all the elements in the movieclip even if the elements are in a different frame.
problem two: after I added an event listener to some elements in current frame and then I move forward to the next frame and go back to the same frame, all the event listeners are removed and i need to initialize them again. is there a way to resolve the issue without the need to re-initialize the event listeners ?
View 1 Replies
Jan 23, 2010
I am trying to get a Flash movie I created to stop looping in my browser AFTER loading it into Dreamweaver. Here's what I've tried:
a) Place an AS3 "Stop();" at the end of the action script for the file (in Flash CS4).
b) Publish with "Loop" in HTML tab unchecked.
c) Open the tandem created .html file in my browser (Firefox)......and the movie plays then stops as hoped
d) Open Dreamweaver CS4
e) Import the swf file into a blank HTML page and Save the file.
f) Test the document in my browser. Movie plays, but the movie continues to loop.
as mentioned above, how can I stop the movie from looping after it's embedded in my web page in Dreamweaver? Is this a Dreamweaver 'problem' rather than a Flash one? The DW help file says to use Flash to control the loop....
View 1 Replies
Jan 27, 2012
I'm currently trying to implement a short video (10 seconds, looping) in a web page. Initially, we tried using HTML5 Video tag with .mov (and H.264 as video codec inside). The file size was a couple MB, but the servers we're using were at 99% CPU usage - which is way too high because they're stacked on top of one another and they could burn up if left at that pace for too long.
My question is simply: what is a good way to display a short 10 second looping video inside a web page that limits CPU usage and will keep a descent frame rate? We're exploring the option of good ol' Flash (SWF) files, but wanted to get some input.
View 1 Replies
Aug 10, 2009
I added some movieclips from the library via the addChild method. The actionscript is in frame 1. I have a button which takes me too frame 2. When I click that it takes me to frame 2 but it also leaves every single MovieClip on the stage from frame 1. This is terrible annoying. As I want it to only display the movieclips on frame 2 not the movieclips from frame 1.
Code:
stop();
import fl.transitions.*;
import fl.transitions.easing.*;
[Code].....
There is an actual frame 2 keyframe so don't think I didn't leave that out. Adding the line removeChild(playButton); just gives me a compiler error about calling.
View 3 Replies
Jun 24, 2009
I am having problems with a flash file i am working on. Basically i have created a slideshow/ebook that includes two buttons that move forward and backward on the timeline. On each page or frame of the main timeline are other buttons and movie clips. Anyways, I am trying to figure out how ,for example , if the user flips forward quickly through the slideshow that the sounds do not continue to play on the next or previous frames. Everything else on the file works great , it's just a matter of keeping the sounds from overlapping.
View 2 Replies
Dec 23, 2007
I have a movie clip named "services_mc" it has 7 frames inside of it. When the movie clip gets to frame 7 I want it to go to frame 6 and play (and repeat this infinite).
I thought all I would have to do is put this in frame 7:
gotoAndPlay(6);
but it stops on frame 7.
View 3 Replies
Oct 1, 2010
I have a music track that I want continusuely playing and looping for until my 600 frames stop, then it stops. (by the way my frames/sec is a 1, not 24 like the default). Also it would be nice if in the last 5 seconds it could somehow fade away. How do I do this?
View 3 Replies
Jan 16, 2009
Im working on a flash website that has an opening page animation that ends at frame 70. From frame 70-1000 I have a slideshow. How can I make the opening animation play once, then play the slideshow, and loop the slideshow only (from frames 70-1000?) I dont want the entire timeline to loop just the few frames that I choose. Is there some actionscript for that? Im using Flash CS3.
View 3 Replies
Apr 26, 2011
I have a character with about 5000 frames of lip sync talking. My problem is getting the character which is a 'fly' to have a constant gentle bounce looping over and over. I can obviously do this with motion tween but doing this with over 5000 frames is a bit counter productive.
View 7 Replies
Apr 11, 2004
The movie is 12 frames long ! I have an action placed in frame no. 11 which says :
if(_framesloaded = 12) {
gotoAndStop(12);
}else{
gotoAndPlay(10);
}
This means that if the movie is not loaded, it will loop between 10 and 11. I have a movie clip on frame no. 10 and frame 11 is empty, this means that, the movieclip (a square) should blink ! Also, the movie when its loaded stops at 11 rather than going to stop at frame no 12 as per the actionscript !
View 1 Replies
Mar 6, 2011
I was browsing through the AS3 help in CS3 and came across good ole Delta. I've been playing around with it and it zooms things just fine but I had an idea for a birthday card for my niece and now would like a way to have the mouse wheel do something perhaps outside of what Delta will permit. I want to move a nested movie clip to next and previous frames with the mouse wheel and until using it with delta for zooming only used it for scrolling. I got it to work but not how I'd like. Using this code I got it to go to next frame which is 1/3rd the battle:
[Code]...
View 9 Replies
Dec 4, 2010
How do I code the logic to create a slideshow that plays nextFrame() or prevFrame() using eventListeners for FWD and REW/REV buttons?
[Code]...
View 11 Replies
Jun 25, 2004
my program is i can choose several movie to load and the movies are save in an array... For example: i choose movie 1 , 2 and 3. Movie 1 was loaded. After i lick 'next 'button, movie 2 will be show .Beside that,if i click 'previous' button, movie 1 will be show. i facing a problem that my previous button is not back to my previous loaded movie but is trace my choices in arrays backward. The next problem is, my first movie load to the second movie load will be a bit lagging. but the rest 1 is ok.
View 14 Replies
Mar 2, 2006
I have various movies clip within a movie and my back (mc = arr2_mc) and next (mc = arr1_mc) buttons are on the main scene.This is on my main scene on a first frame
ActionScript Code:
movieclip.prototype.playBackwards = function(arg){
if(arguments.length>0) {[code]....
when it goes back, it goes back frame by frame without stopping but I want it to go only to previous Scene. instead of going to previous frame.Do i have to create a unique button? which i did but i didn't work?
View 2 Replies
Mar 18, 2011
Am creating a two page document in flash cs4. Each of these 2 page documents have links to a learning resource on a web server.All I want is for the user to be able to navigate to and fro this two page document. Infact, I want to be able to click on a NEXT button to go the the nextpage and PREVIOUS PAGE button to go back to the previous page.
View 1 Replies
Nov 23, 2010
im using cairnform framework as3 and i have a single swf file, and i m searching a while for back button to go back a previous screen with all data's which r there previously.
View 0 Replies
May 2, 2005
What is the script used to go to previous frame viewed as opposed to (see below) previous frame on timeline?
View 3 Replies
May 2, 2005
What is the script used to go to previous frame viewed as opposed to (see below) previous frame on timeline?
View 3 Replies
Feb 2, 2010
The issue I am running across is this: I encoded and embedded a movie clip to act as the background. There are other animations that can and will loop, as the movie resets itself. But there are some elements that I only want to run once and not repeat once the embedded movie loops (link introductions, where objects fly in and transition into the button). How can I set the one time animations to fire just once, while keeping the embedded animation on a loop?
View 1 Replies
Feb 2, 2010
I am fairly new to Flash and I am constructing a website. The issue I am running across is this: I encoded and embedded a movie clip to act as the background. There are other animations that can and will loop, as the movie resets itself. But there are some elements that I only want to run once and not repeat once the embedded movie loops (link introductions, where objects fly in and transition into the button). How can I set the one time animations to fire just once, while keeping the embedded animation on a loop?
View 1 Replies
Dec 5, 2011
Does Away3D 4x require Flash player 11 or will it run in previous flash players - e.g. 10, 9 without the GPU availability through Stage3D?
If not, are there any libraries that can?
View 1 Replies
Jul 8, 2011
I am new to AS3 FLASH.HOW TO CREATE DATAGRID with paging.I have successfully create datagrid and fill dynamically from database using php.I have more than 600 records and want to show 100 records in grid and show paging bellow it with next , previous option.this is my code.every thing is working fine. I want add paging it.
for (varName in returnObj) {
var plid = int (returnObj[varName]["plid"]);
var varState = String(returnObj[varName]["state"]);
[code].....
View 1 Replies
Sep 15, 2011
I'd like to be able to navigate forward and backward through my keyframes using the keyboard. The code to do this for individual (non-key) frames is simple enough. The following is straight from Flash's "Simple Presentation" template:
stage.addEventListener(KeyboardEvent.KEY_DOWN, fl_changeSlide);
function fl_changeSlide(evt:KeyboardEvent):void
{
if(evt.keyCode == 37) // LEFT
{
[Code]...
View 2 Replies
Nov 16, 2009
I want to create a preloader that plays a certain amount of frames as it loads the rest of the frames. So, I have labels on the frames basically and need a preloader to play the "loading" frames as it is loading the "content" frames. Does that make sense? I have no idea how to even start this one... p.s. I am using AS 2.0, but if it can be done in 3.0 easier, I can switch over its no biggie
View 4 Replies
May 2, 2011
there seems to be no accepted method of playing multiple flv using buttons. My latest attempt has me putting multiple instances of the flvPlayback component in different frames and using buttons to navigate to those frames. It works but nothing anyone has posted anywhere will result in removing the flv when you go to a different frame and instance. This was simple in AS2. Load movie to a traget and each time you load a new movie the other one goes away. REALLY goes away.
View 7 Replies
Feb 12, 2010
A few months ago, I started noticing a small annoyance in Flash and the Flash Player. This small annoyance quickly became a rather large inconvenience, so I recently started googling a solution. Nothing to be found, unfortunately.Here's my problem:When I open a swf file with the standalone Flash Player (any version), the size of the player is set to the size of the last swf file I loaded with the "File - Open" dialog. By the way, when I use the file dialog to open files, the player resizes appropriately.An example:I open a swf with "open with - Flash Player" and the Flash Player sets its size to 320x240 instead of the swf's size, 640x480. Or I open a swf that should be 550x400 and it opens at 320x240. The Flash Player always uses the dimensions of the last file opened with "File - Open."
This problem even affects the Flash CS3 built-in "Test Movie" player.The problem is a little difference within the "test movie" player. It seems to keep whatever the dimensions were the last time you resized the player yourself, and full screen mode doesn't work properly.I tried upgrading, downgrading, editing the
View 1 Replies
Oct 24, 2011
How can I get the previous focus/be able to compare strings?
View 2 Replies