I'm building a site with six pages. Each page is contained in a movie clip with a transition in and a transition out with stop(); in the middle. What I'm trying to do is trigger the transition out from page A to transition in page B.Example;
Button A is clicked and transition in is played in mc_A. mc_A is then stoped in the middle.
Button B is clicked and plays transition out in mc_A then contunus to transition in in mc_B.
i have looked everywhere for a tutorial on this - i have tried writing, and re-writing codes....i just cant get it. is there any tutorial i overlooked? here is what im looking to do - NO SHORTCUTS: have my main file that loads the buttons, my external swf container, my intro animations, and my swf "out" and "in" animations when a button is clicked i want it to point me to specific frame labels. i will have an "out" and "in" frame label and which will be the locations of the transitional starting points i want it to play the "out" transition, than unload the current swf, than play the in transition, than load the swf of the button that was clicked i want the animations to all be done using frame labels all within the MAIN swf file.... i have had no luck doing this....and i do NOT like the tween class....
View 10 Replieshow to make a button respond to a zoom transition. Pretty much i need to click a button and an image zooms out.
View 3 RepliesHow can I add a Squeeze transition effect between frames using the transition manager class on a simple slideshow using the goBack and goForward functions in ActionScript3? Below is the code I have so far:
stop();
function goBack(event:MouseEvent):void
{[code].....
i have a flex app that transitions between 2 states with the toggle of a button. my issue is that the effect of fading only seems to work on the 2nd transition and after. However, for my first transition... going from State1 to studyState... there is no fade effect whatsoever, in fact the components in state1 disappear completely (the footer fills the empty gap where the "body" use to be) and then the flex recreates the studyState (without any fade refilling the "body" with components only in studyState). After this first transition however, going between studyState and State1 working COMPLETELY fine.. why does this happen and how can i make it so that crossfade works STARTING FROM THE VERY FIRST TRANSITION?[code]
View 1 RepliesI have a presentation using the "presentation" template that comes with flash. I am trying to transition slides with the behavior slide transition options. but I've learned that it works find while going into a slide and doesn't go to the next slide when leaving.So basically I want it so that on right arrow first play out transition then go to next slide.
View 2 RepliesI am creating a website with a content box and 4 buttons which activate 4 different pages of content. I would like the content box to resize smaller on one page when activated by a button and resize back to normal when clicked on any other button. I figure I will use a shape tween to resize the box to avoid distortion. So, how do I program each button to transition properly if the page with the smaller box is displayed?
View 18 RepliesI need to do a flash banner, where are 3 images (i had to cut down 2 images off from file, to be able to attach it)(all of them have text, contact button (clickable) and background box).When hoverover image:
-image changes to another
-image and background zooms to a bit bigger
-text changes to new
When hoverout, image changes back to it's original form.At the moment, I made buttons, of those 3 images.It works quit well, but transition to mouseOver is quit ruff..
when i click my button the first time my transition MC works fine but when i click it to another button it works fine too.when i click back to the first button it shows not the transition but only the completed transition so i get no animation.[code]
View 1 Replieshow to produce a smooth transition when you roll off of a button..
View 1 RepliesI want to load a new movie using AS, after an transition animation has played once a button has been clicked .... > here is my code: (ps using lacos motion tween btw)
#include "lmc_tween.as"
var t:Number = transition_mc._xscale;
var ys:Number = 400;[code]....
It doesnt work the onEnterFrame isnt fireing, although t IS greater than ys by that point..
I have created a linkbar with two labels. Now, I need to keep a track of the label clicks.i.e. If in the beginning "First" is clicked, the details will be displayed. After that, if without submitting the details, "Second" is clicked then an alert message should come to inform the user that "First is still in progress, do you want to cancel and begin Second operation". Vice-versa for Second to First transition. I need to know how to write events to keep track of which button clicked.
View 1 RepliesI have my test site at alenelias.com/home2.html and I'm using an old AS2 class for the buttons to do the up, over, hover, selected states.When you click the back button on the browser, the selected state doesn't change and I can't figure out how to fix this and it is the most important problem here.The title of the pages has the forward slashes as well and tried to change it with no luck.And third if I keep clicking back, once I reach the intro page (loader in a different scene), if I press forward, the url changes but the page does not. Not a huge deal but would love to solve that as well.I recently looked at a form (blog.deconcept.com/2006/10/25/swfaddress/) and noticed this url spirituc.com which is very similar to my site but has the problem(s) fixed.URL...
View 0 RepliesAll works fine untill I do something to the loaded swf.For example if I click a button on the loaded swf the button works but then when I click the button on the main movie to load the next and play the transition the transistion doesnt work.If I dont do anything to the loaded swf the transitions work.Is it something to do with the paths being changed when the loaded swf is acivated?
View 2 Repliescould someone with scripting a fadein/fadeout transition for external swfs between the button clicks or suggest another way to do it?
View 1 RepliesI'm using tweenlite to create a flicker affect on roll over, however when i rollover really fast the instance freezes half way through the transition and the button eventually goes to white. The code im using is as follows:
[Code]...
I am trying to create a page transition that will play a movieCLip transition into a page. and then it stops then when another button is pressed, it will play that transition out while loading the appropriate one. In the attached FLA, if you click on the red button first, the blue transition plays,
--red button code--
mybutton1.onRelease=function(){
_root.transitionClip.play();
}
and then stops on the stage. When you click the green button second,
--green button code --
mybutton2.onRelease=function(){
_root.transitionClip.play("out");
_root.transitionClip2.play();
}
it works correctly/ Playing out of the blue Transition and into the Red transition. However if I click it again it does the opposite, and just keep alternating.
If I add the
_root.transitionClip2.play("out");
to the first button then, nothing works right. I will eventually have more buttons, and may need to use a variable to control which "out" transitions is played, but how do I get the buttons to do this?I just want it to exit the current movie clip and play the "in" section of the desired clip.
I was playing around with the transition tool after reading one of the posts now every time I add an image from the library to the stage it's got the transition tool handles. How do I get rid of them??
View 3 RepliesI have a photo slideshow that is on loop play, with photos fading into one another. Right now, when the video starts over it has a hard transition from the end to the beginning. How can I make the end fade back into the beginning, keeping a smooth transition?
View 1 RepliesI have a movie clip playing on a certain level. I have buttons on the stage that load different movie clips on that level. So far it's very easy. loadMovieNum ("name.swf", #);The thing is I don't want a new MC just to replace an old one. I want an old one to have a nice go away transition and only then a new movie clip will load.How to do that, since different movie clips are going to be on that level at different times?
View 4 Repliesis there an action script command that: If you press the button the trigger in the timeline would first show closing animation of that page and the move to a specific frame number?oing from: "About" to "Contact" needs to go from frame 50 to 51 play the movie up to 69 then stop at frame 70 and then jump to specigic frame for contact page which is 280
View 3 RepliesAnyone know how to do this 3D page flip transition?When you click the menu it will flip the background before transitioning the new text
View 4 Repliesi have this slider effect and would like to reduce the transition speed between images, thus the circles take longer time to pass, anyone can help me out?here is the link for downloading the flash file[URL]
View 1 RepliesI'm using Flash CS4. When a page is opened it plays a 20 second Flash movie. At the end of the movie I want to be able to transition directly to another web page. How do I do it?
View 1 Replieshow i could make the transition from my last photo to the first photo a more correct transition. maybe my explanation was difficult to understand?? take a look at these two sites(owendawsonphotography.com / owendawsonpga.com) and look at the rotating slide show. when the last image fades out it goes to complete white and the first image comes in at full opacity. I want it to look like the other transitions in the slideshow.
View 1 RepliesI would like to make the site below. [URL] I want to do a transition in and out First, In the site (btn1) 1st page( mc?) is slided in, and then, when click the buttons in the navigation bar is clicked (btn2) to go to 2nd page 1st page will be slide out, then
View 1 RepliesI would like to make the site below. [URL] I want to do a transition in and out First, In the site (btn1) 1st page( mc?) is slided in, and then, when click the buttons in the navigation bar is clicked (btn2) to go to 2nd page 1st page will be slide out, then
View 2 RepliesI have movC_mc inside movB_mc inside movA_mc AS2 to access movC_mc from the my Actions layer in frame 1 in the root would be movA_mc.movB_mc.movC_ mc.My question is how can I target the movA_mc from the root of my .fla.[code]just can't get my head to transition from AS2 to AS3.
View 2 RepliesIn Flash CS3/AS3, if I try to run a transition on a movie clip "PaneB" accompanied by a PaneB class definition, I get the following error:
ReferenceError: Error #1069: Property __transitionManager not found on Site.Page.PaneB and there is no default value.
However, if I don't associate a class with PaneB (leaving Flash to define a default one), I don't get the error. If I create a child clip (for PaneB) without a class attached, and then run transition on that child, things work OK. And, if I create a new movie clip at run time and add PaneB as its child and then run transiton on the parent, it also works fine. Meaning, there's something that the default class definition is doing that my class (that extends MovieClip) is not doing. Happens even if I don't define anything in the class!
I need to add fade in transition effect for my external jpeg gallery using CS4 standard UI Loader component. Below is the script that I used without any transition.
//-----------------------------------------------------------------
next_btn.addEventListener(MouseEvent.CLICK, nextImage);
function nextImage (evtObj:MouseEvent):void{
imageNumber++;
[Code].....