I'm newbie in Flash and action script, just start learning T__T...
onClipEvent (load) {
speed=10;
} onClipEvent (enterFrame) {
if (key.isDown(key.RIGHT)) {
_x+=speed;
} else if (key.isDown(key.LEFT)) {
_x-=speed;
} if (key.isDown(key.UP)) {
_y-=speed;
} else if (key.isDown(key.DOWN)) {
_y+=speed;
}}
Is that making the object moving to left and right?
I'm making a game in AS3 and I need to move an object from left to right using the keyboard, it works fine but the problem is that when i push left or right the object moves but not in a fluid way, I assigned to movement to KEY_DOWN but first it moves the ammount of distance i gave up then pauses for half a second and then I moves fluid in the direction i gave. Now my question is how do I need to program it so that when I push the button it move fluid in that direction immediately instead of taking a little pause?
View 2 Replieshow do i stop the movement of an object moving from left to right. I want to be able to place it anywhere id like.
View 2 Repliesmy title explains what im need but im using flash cs4 and heres what i have so far:
var centerX:Number;
var centerY:Number;
var centerZ:Number;
[Code].....
ok so RBall is my first moving object and my orbiting object will be called orbit
I'd like to keep an object appear to remain in the same place while moving the camera.I'm using this scriptto orbit an object using a mouse drag. But I have an object in the scene that I would like to keep still. How to I do this?
View 1 Repliesusing trig, when moving an object based on its current rotation, how does one "detect" if the object is currently moving to its own left or right direction? example: right side up: left moves the car to its left, which is left. upside down(180 rotation): left moves it the car to its left, which is right. based on movement alone, how can i say its moving to its own oriented left or its right?
[Code]....
im currently making an "AS3 beat em up" ala streets of rage or double dragon.Currently i have my character moving and a few animations done and i am trying to figure out how to make attacks work.I have some "basic" animation for his attack, but im not sure how to get it to work correctley.What happens is, if you press control (the attack button) whilst the character is walking he just keeps moving and is stopped on the attack frame.I want the character to stop moving if the attack is pressed and once it is released start moving again.
hero.gotoAndStop('still');
var left:Boolean = false;
var right:Boolean = false;[code].......
Basically I need to have a cartoon character walking to the right hand side of the screen and then turning around and moving back to the left hand side and so on.
I have some code done but it could be all wrong as I am not the best coder at all, just starting out.
Code:
package classes{
import flash.display.MovieClip;
import classes.RollableChar;
public class MainApp2 extends MovieClip{
//public var theCharacter:MovieClip;
//public var myCarrot:RollableChar;
[Code] .....
I have an image that's being moved like so:
Code:
mcSky.addEventListener(Event.ENTER_FRAME, moveSky);
function moveSky(evt:Event):void {
[code].....
i got my character to move left, right, down and up wit this code:
[Code]....
My question is, how can i block the up and down movement? I tried simply deleting some part of the script to block does movement from the user. But then the script would not work properly : s Here is the uploaded page i'm working on: link.
i am trying to find out wether the mouse is moving to the left or to the right but i reckon by storing the old mouses location and updating the new postion and store this in a varaible if thats possible
to update and check the mouse x and y postition on the stage saw i can locate
wether the mouse is moving to the left or to the right .
mouse old postion to the mouse new postion
example by using a variable
mouse_old_xpos. _xmouse
mouse_new_pos
this want i tried
var mouseListener:Object = new Object();
mouseListener.onMouseMove = function() {
mouse_oldxpos = _xmouse;
mouse_newrightxpos = ""
[Code].....
I'm trying make a jumping animation move to the left when I click the left arrow key and up arrow key and don't know how. I'm new to AS, just sorta winging it.
[Code]...
I've got several small moveiclips moving around the screen to different locations using the tween class, and for some reason it leaves little red artifacts in their trail on the screen that won't go away. any way to refresh the screen or something? Is the only way around this to cache the movieclips as bitmaps?
View 3 RepliesHow to make movieclips move only from left to right under the same lane (meaning it is like marching on a lane straight) and stop at 3/4 of the whole stage(3/4 of a stage is a platform I wish to have) irregardless of how big the stage is then disappear. When the object move and get closer to the edge of the platform, the player press either left or right arrow keys to so called remove the object. When click on the right arrow key, "rectangle box" disappear and left arrow key, "circle box" disappear. After like a certain timing(let say its a minute), it would go to another frame to show end of the game.
View 1 Replies[Code]...
The problem is that when I am moving left and up, "pink"-a "blue"-s and "green"-d work. When I am moving down and right, none work. When I am moving right and up, only "pink"-s and "blue"-d work. I have tried changing the order of my code but it does not work, What am I missing?
I read the Movement using ActionScript tutorial [URL]. My question is: How can I make the box stop at a certain point, instead of disappearing. What I want to do is to have a picture move from right to left, and then have it stop when it reaches the left side of a banner that I'm trying to make. I'm working with an image of a ship, and I want to make it look like it's floating from the right, and when it reaches the end, I want it to stop there and have text appear on the right side of the pic.
View 8 RepliesHow do I track if the user is moving mouse left or right? I am trying to make a Fash VR sceen from muliple pics and I want to display next pics if _xmouse has increased or previous pics if _xmouse has decreased.
View 3 RepliesI have a block that I'm trying to make move from right to left, and if the block gets to a certain point, it will move back to it's original position. So, I have this on my block (movieclip) right now.
Code:
onClipEvent(enterFrame) {
speed = 3
dist = 8.5
_x -= speed;
if (_x = dist) {
_x += 3
}}
But all this is doing is throwing the block at the 8.5 distance...
How to accomplish making the knob pan center at 60 for 60 Hz and only go left and right between the ranges of 59.95 to 60.05 in increments of 0.05? I am illustrating synchronizing between two power systems. I got the scope and and voltage wave forms down but making the knobs work the way we need is driving me nuts.
View 0 RepliesAt the bottom I have some leaves there. I want to make a couple different size leaves like that and make them go from left to right at random paths and have it loop. I don't know much about actionscript but is there a way to do this without having to make a bunch of guide paths and doing lots of tweens and rotations?
View 14 RepliesI'm trying to progress in my actionscript skills and use more actionscript. In the past I created a static movie clip maybe 50 pixels wide by several hundred pixels tall. Starting at the top of the strip the alitiudes were written next to a hash mark, a couple of carriage returns, a hash mark without any numbers, a couple of carriage returns and a hash mark, and the process repeated.
[Code]...
I am trying to do a apply a tween for the width property on a MovieClip Object but every time it changes the width and the position too, and I don't want that. I want to change the width going to one side without changing the x and y of the object.
I tried both of thes and they gave the same result.
var c:Tween = new Tween(left, "scaleX", Strong.easeOut, 1, 1.5,20,true);
var c:Tween = new Tween(left, "width", Strong.easeOut, 20, 200,20,true);
I think it is applying the transformation according to a center of the movie clip. but I don't know how it can be changed.
Im working on a small project and it involves a guy which you move with the arrow keys. The arrow keys add to his x, y velocities and his position is updated accordingly. How can i get this man to grab onto an object and spin around it (like when you grab pole and letting your momentum swing you around) . I can make him grab the object but I dont know how to modify his x,y speeds to simulate the arc.
View 4 RepliesI am working in AS2 and I have a flash project that is almost complete but I would like 1 thing modified.I have a fish image following my mouse.
(script below)
onClipEvent (enterFrame) {
_root.yChange = Math.round(_root._ymouse-this._y);[code]...........
The problem is that I would like the fish image to "turn" and face the direction of the mouse. Currently, as is, the fish follows the mouse fine when the mouse is moving to the right, but when it goes to the left the fish swims backwards rather than turns and swims the correct way following the mouse to the left.How would I modify the script to get the fish to turn and always swim forward when going left and right?
I have a game: The object circled is the amount of shots you have left. But it removes the last object in the array, so the last bullet, its hard to explain, I have 20 bullets, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20. The array is removing the 1 first. Well what I am saying is number 1 is actually number 20, so the array is doing nothing wrong, I did. But I am not sure how to reverse the order.
So [ its removing this one-> o o o o o o o o o o o o o o o o o o o]
But [ --------------------------------- o o o o o o o o o o o o o o o o o o o <- I want it to remove this one]
The reason being is because the user cannot see how many they have left, so think angry birds, the amount of birds is displayed according to the amount there allowed, its to the left of the slingshot, like mine, every time the bird is shot, the rest of the birds shimmey towards the slingshot untill there is none left --- This is what I want, but have managed to confuse myself aswell as you most likely.
Here is my code, to generate and take awau my bullets/birds
public function createShotIcons() {
shotIcons = new Array();
for(var i:uint=0;i<20;i++) {
var newShot:ShotIcon = new ShotIcon();
newShot.x = 200-i*15;
newShot.y = 300;
addChild(newShot);
shotIcons.push(newShot);
}} public function removeShotIcon() {
removeChild(shotIcons.pop());
}
i have a swf object in my page, and i want it to have 100%width (entire screen) but i want the swf to be aligned to the left. with the following code it gives me the 100%width but the swf is aligned to the center of the page, is there a way to change the alignment?
<object type="application/x-shockwave-flash" data="http://localhost/arquitectos/flsh/menu.swf?" height="120px" width="100%">
<param value="http://localhost/arquitectos/flsh/menu.swf?" name="movie">
[Code].....
I'm working on Flex component which can be resized using handles on the right and left (that is, if you click and drag the left side, the component will grow to the left, if you click and drag on the right, it will grow to the right).
Right now I am using:
var oldX:Number = this.x;
this.x = event.stageX + (initial.x - initial.stageX); // Move the left edge to the left
this.width += oldX - this.x; // Increase the width to compensate for the move to the left
But that makes the right side jump around, and generally looks ugly.
What is the "right" to do this? Is there something fundamental I've gotten wrong?
Edit: The jitter occurs on the right side of the component. When I set this.x, the component moves to the left, the screen redraws, then the width is updated, and the screen redraws again.
Have a flash picture slide show that fades in and out to transition from picture to picture. Would like to use a shared object so that when someone goes to the next page it will load on the picture it left of at. Should the shared object load at the last state or should it save the frame position? The movie has so many pictures that people will only see the first couple pictures every single time they change pages and never get to the end of the movie. This was made in Flash CS5
View 1 Replies1. Is there a way to scale up an object from its center even if its registeration point is at the top left? can that be done using TweenMax?2. can I apply the same tween on two objects at the same time? basically what I want to do is load up an image to the stage, and then tween its scale from 0 to the original size along with another movie clip behind it that would form some sort of a border for the image. and I want to scale them up from the center.
View 5 RepliesI currently have an dragable button that is locked to only move left and right within a small bar, and want to have that button playing one sound going left, and another sound going right.
View 3 Replies