ActionScript 2.0 :: Prevent Image From Disappearing Before Loading Next?
Jul 31, 2009
I'm loading an external .jpg into a mc. I have the code listed below, the problem is when I try to load another image the first one disappears before the second one is completely loaded. What I'm trying to accomplish is the first image will stay on the screen until the second one reaches 100% then they will simply switch.
ActionScript Code:
var backgroundloader:MovieClipLoader = new MovieClipLoader();
backgroundloader.addListener(this);
function onLoadInit(_mc:MovieClip) {
_mc._height = Stage.height;
_mc._width = Stage.width;
[Code] .....
So again this works fine, but now i have a button that onRelease has :
backgroundloader.loadClip("2.jpg", bgholder_mc);
So how can I keep 1 on the screen until 2 is completely loaded then switch them out ?
Version Used:Flash MX 2004 I am trying to generate a Page with 3 paragraphs,each text paragraph with some custom animation attached to every character.What i Did was:
1.Open a new document
2.Create a Dynamic Text Box,named it "letter_txt" for the instance name.
3.Converted this to a Movie Clip and named that instance "letter_mc".
4.Converted "letter_mc" into another movie clip "text_mc"
5.Went to editing mode and used some tweened animation on "letter_mc"
I followed steps 2-5 and created two other movie clips with "text2_mc"->"letter2_mc"->"letter2_txt" and similarly with "text3_mc"->...I followed nearly the same procedure as shown in [URL]
here's what i did in frame 1:
// -----------FRAME 1----------------- myText="Top Cat! The most effectual Top Cat! Who's intellectual close friends get to call him T.C., providing it's with dignity. Top Cat! The indisputable leader of the gang. He's the boss, he's a pip, he's the championship. He's the most tip top, Top Cat.";
[code]....
The animation in My first Paragraph i suppose should be able to swivel ,but There is something unexpected about them.Also all the letters start disappearing at the start of the next "paragraph".I am very new to ActionScript and Flash.I tweaked the code a bit from the one given since I do not see how a movie clip "mcLetter" can have an attribute "text".
I'm having trouble loading a SWF that contains a FLV movie into another SWF.
Here on its own is the SWF that I want to load:
[URL]
You'll see that the movie and the controls appear and work properly.
Here is the SWF in to which I want to load it:
[URL]
If you click the white rectangle at the bottom, it will load comback.swf into Level 1 but the FLV and the controls are missing. (Somtimes the FLV appears w/o the controls.)
I add to a movieClip a number of images from an array, to be thumbnails using a Loader object, then into a bitmap Object, then into a movieClip object. The movieClip objects are added to a movieClip on the stage and resized and also eventListeners are added. This works fine.Next when I click on a thumbnail movieClip, I make a new main movieClip which is to store a bitmap. The bitmap I get from the same array as I got all the previous images (in the correct array position using a variable). This is then added to another movieClip which is on the stage. This all works fine but (and he's the teaser) for the life of me I cannot see why when the main movieClip is added to the stage movieClip, the thumbnail one disappears!I have no removeChilds, nothing is covering it, no unload();, so I must assume its just getting removed from the displayList for some weird reason. I've even tried using two Loader's and ton's of bitmap to movieClip to an array to try to get two copies of it but to no avail.
I'm teaching a bunch of kids to use flash at school using CS4. One of the kids is having problems with the image that he is moving with the bone tool. After about eighty frames the image disappears but the bones stay. How do we get the image to stay?
I've created a button that I turned into a library class and am pulling onto my stage (same as attachMovie is AS2). This button has a timeline which does a small amount of animation. In my AS, I am loading a thumbnail into each button class and am also assigning mouseevents of roll_over and roll_out to my button... this all is working so far. On roll_over the button's timeline plays to a point; on roll_out, the button's timeline plays to the end and then goes back to the first frame. BUT now my image is gone. Why? Here is my AS:
I have simple button, which calls loader to load external swf. It works well, but after some time, when I click button again it loads swf from the start. Is there any way to load swf permanently? It will be great if second click on the button would run complete event without loading process.
edit: I use unloadAndStop when I remove loaded swf from the stage. Maybe it has something to it.
I have a menu nav that loads swfs into a container clip. Once the swf loads, the menu nav unloads and is replaced by a page-specific nav. If the user clicks on the menu button, the page-specific nav is unloaded and replaced by the menu nav. ...this is to toggle back and forth between the two nav menus, as I'm sure you've noticed
Once a swf has loaded and if the user loads the menu nav, the option to load the same swf (current swf) appears. Rather than reload the current swf, is there anyway I can have the button check if that specific swf is already loaded and if so, not load it again?[code]...
But the problem is that they start downloading the entire videos. I've read some topics and docs and I feel that there is a way to avoid it For example, I've tried this line: video.mx_internal::videoPlayer.bufferTime = 1;
I am loading a jpg into my Flash. When I zoom into the flash in the browser (for example, setting the zoom to 125%) the jpg in the flash starts to distort and pixelate. How do I get Flash to not pixelate the jpg?
Im creating a flash projector which has a holder swf with an empty movieclip. A series of external SWFs are loaded into the empty movieclip on the push of a button. Once the clip has been loaded, other external SWFs can be replaced in the empty movieclip at the push of a button. As memory leaks and garbage collection seem to be an issue, I was wondering the most memory efficient way of loading, unloading and replacing these external swfs so that memory leaks are kept to an absolute minimum.
I have a Flash app that loads a PNG as a bitmap and adds it to a MovieClip instance called test_mc on the stage. test_mc contains a placeholder clip that we hide after adding the bitmap. E.g test_mc.addChild(bmp); test_mc.placeholder.visible=0; This works fine. I then move the MovieClip around the stage in the timeline with a lot of keyframes. This works fine.
I then add a layer, called layer_mask, above the layer with the movieclip on. I create a shape on layer_mask and set layer_mask to mask the movieclip's layer. This still works fine. Now I add a keyframe in layer_mask. This stops working. The bmp is no longer loaded into the movieclip, and the placeholder is no longer hidden. The bitmap is actually loaded in and displayed correctly until the keyframe in the mask is hit, at which point it reverts to displaying the placeholder without the loaded bitmap.
I'm currently testing various ways to zoom images (or rather, whole DisplayList hierarchies). Using scaleX and scaleY works quite well, but when I use the z property to zoom the image (by placing it further away) the image gets blurred when returning to z=0. The image is put in a Sprite ("groundLayer") and that Sprite itself is put in another Sprite ("zoomLayer"). Whenever I'm zooming I'm manipulating properties of the "zoomLayer" only. This image was taken right after returning scaleX and scaleY back to 1.0: This image was taken right after returning z back to 0.0:
I've tried searching for information about this phenomena but couldn't really find anything useful. Can anyone explain what's happening there? Why is Flash blurring the image after manipulating the zproperty? Is there a way to prevent that (well, other than obviously leaving z alone)?
I am loading images of different size and then images are scaled and border is drawn for each image as shown in below link,[URL]... I want that border of images to be of the same width and height and for that I need to find out the max width and height size image before loading all the images. Is there any way that I can know the width and height of an image before loading it completely?
I developing a site where on the homepage, there are about 6 images that rotate, but if you click on a sub link, a different image loads. But the problem is that, the first image has to cycle through before the second image loads. I want the second image to load immediately.
[code]This script is for a loader image gallery in flash, as part of a class assignment. What happens is that in flash, when I open the swf file, the initial image (images/nair_evanescentautumn.png) will load fine. However, clicking on any thumbnail image (including the exact same images/nair_evanescentautumn.png), will result in an error saying the file cannot be found.I cannot figure out why it is doing this... I've tested it over. Clicking each thumbnail does go to the correct position in the two separate functions. All said full-size image links are in the folder images/, and replacing the initial loader image will load the other images in place of the default one. However, clicking on any thumbnail still results in URL not found, even though everything works correctly.[code]Before anyone asks why I'm putting this kind of content into a flash site, I'm not--this is only for a class assignment. I'm just trying to figure out why my images aren't loading right when I'm only doing the exact same thing in the functions as I am on the other pages.Of note, commissions.swf has the exact same feature, just with swf files loaded instead, and it works perfectly fine. home, traditional, digital, and photography all have the image gallery, and all have the same issue (I only referenced one page because if I can fix one page I should be able to fix all of them).As for the artworks, they are all my fiance's. The website design was built for her, and I used the website design for this project because I didn't want to have to build an entirely new interface design. Since the project also required a gallery, I felt that this interface would work just fine.
I tried searching for an answer to this on the forums and it seems you can't duplicate a movieclip that has a dynamically loaded jpg in it, I mean you just get a duplicate empty movieclip?What I want to do is have 3 copies of a pic, each tinted a little differently, and have them converge and reveal the "composite" of this pic. Do I then have to use loadMovie 3 times?Does loading the same 50kb image at the same time mean you're actually loading 150kb?
i was creating my portfolio using xml gallery script from this site. the thing is that it loads one picture at a the with a preloader between each load. is there a way to load the first image and keep loading the rest so there will be only one loading time? here is my action script:
Is it possible to capture the image loading event like when the image is fully loaded and such when it is assigned to the htmlText of the textFiel???
I have a scrollPane that contains a textField which is loading an image via img tag where there is no scrollbars initially because the textField is not large enough in the beginning, but it is larger than the scrollPane after the image is fully loaded.. and I am trying to update the scrollPane once the image is fully loaded..
I'm loading a .png image with loadMovie() and I need to center the image (for later dragging). I know flash has some issues with loading stuff, but I really need to get the movieclip's width. If someone knows how to get over this and get the movieclip's width
This is a part of a more complex app, so that's why I won't paste any code.
I made 1 image gallery. and i am facing a big issue. When one image is loading in my Loader object. If i click on next image button. It starts loading another image without canceling the existing image. So mutliple images appear at stage in this case. I want something that stops loading older image and start loading new image.
I have a database (phpMyAdmin 2.6.0-beta2 ) which holds information which i want to display in a flash form so i'm using an XML file to bridge the gap. After building the application in FLASH and running it the text from the database comes through but no the images. Details of what i'm trying to do are as follows: The XML file
im working on an image viewer and im loading an image to a loader and then add the loader to the stage.I want the user to be able to drag and drop the image but since it's a loader i dont know how to do it. I tried
i am loading an external .txt file and am displaying. its working fine. but when am trying to split the specified values, the value was disappearing. i mean except that splitted value everything is displaying... how to get that.
var loadXML:XML = new XML(); var myarr:String; loadXML.ignoreWhite = true;[cocde].....
its an xml string based. now i want to store the picture thumb value in one array value, and description value in another..... like tat..
What I need is to build a page with a list of 5 links each stating a time. These links will be used to determine bands timeslots which is the fairest way I can possibly think of...kinda like drawing times out of a hat except over the web. I want to send this list of 5 different timeslots to a band, have them click a link and see their timeslot...(ex; 9:00pm - 9:45pm) and in the meantime...all the other links become inactive and disappear. This can be done 1 at a time so I can rebuild the list without the previously chosen time slot being an option...or it can be the first person who reads and choses gets the slot and the next person to view the page would see the page without the previous selection even shown. I would also like the selection to be emailed to my email address.
_____Here's how I would like it to look..._____
In order to be fair about timeslots, choose from one of the links below. The link you choose will contain your timeslot in which cannot be changed and you will not be able to choose another link after you have chosen. These links are random...no particular order and nobody knows what timeslot is in what link. Your selection will be emailed to me.
Choose your timeslot A Choose your timeslot B Choose your timeslot C Choose your timeslot D Choose your timeslot E
I created our website using Actionscript 2.0 and on several of our pages there is a drop-down text box that has a "close" button on it, which is just a movieclip located inside the text box movieclip. For some reason, if you stay on a page for a few minutes the close button disappears. The hand still shows up when you hover over where it was at and you can still click on it, but it just turns invisible. I'm not sure what's causing this.
All symbols have stopped rendering while in the IDE. They publish fine, but I can't see them on stage.
Details: Flash Pro CS4 10.0.2 Mac OS X 10.5.8 on MacBook Pro w/ 4GB RAM.Objects that are not symbols render fine (shapes, groups, text, components).Symbols are selectable and show the blue selection boundary.Symbol selection is constrained to the shape of the symbol, not the bounds.The 'empty clip' handle is shown for each symbol(and effects / filters are rendered on it).The layers are not hidden, and switching to outine doesn't change the appearance.All files opened on this Mac show this behavior(IDE pref setting for don't display symbols?) .Files openfine on other machines (PC & Mac).I trashed the 'Flash CS4 Preferences' file, but it didn't fix it.Here's the IDE view of the stage:
