I'm trying to load 4 dfifferent SWF's into exact loactions in my MC. I'm trying to do this by loading my SWF's into individuale MC's inside my MC. The problem is that the SWF's Move down whe the load. I've posted FLA that I have been Testing with. It also contains the External SWF's to be loaded. Using Flash 5
View 2 Replieshow to rotate individual jigsaw puzzle pieces using the left and right arrow keys. Can anyone help? Here is the action script that I am using:
on (press) {
startDrag("_root.pic9", true);
this.swapDepths(100);
}
[code]....
I have a jigsaw puzzle that I want to add the ability to have each peice rotate. This code is based off some code I purchased. I cannot reach the company other than some generic instructions to add an event. The instruction I was given was:
public function rotateActivePiece(dir:int=1):void
Rotates the active puzzle piece (last clicked),
90 degrees, clockwise if dir>0, and counterclockwise if dir<=0.
Parametersdir:int (default = 1) - Parameter defining the direction of the rotation.
CW if pozitive, CCW if zero or negative.
I dont know what to do with this or where to add.
I'm pretty new to flash but recently got an assignment at college to produce a childrens game, I've been following a tutorial online to produce a jigsaw puzzle, so I can get use to actionscript and gain a little experience. I cant get some alignment right. I've followed this tutorial exactly and this is where i am stuck, below are the instructions and how it should look:
This is how mine looks, as you can see its out of place:
I'm using CS4 and was wondering why when I import my PSD files onto the stage I don't get a symbol created in the Library but when I import into the Library itself I do? Is there a prefercence somewhere I can turn this off or on so I don't have them created?
View 7 RepliesI placed a large photo (movie clip object) as a background onto the stage, but it exceeds the stage size by 25%. It's done on purpose. While I see it in the Flash authoring environment, the image excess refuses to appear in Internet Exlorer once published.I also have an animated object over (foreground) that does appear past the stage in the browser.
View 1 RepliesThe top left corner works ok - I copied and pasted the code and made the minor changes. The other 3 parts of the puzzle are causing a real puzzle for me.I've checked instance names, and everything else I can think of.Is there something in the code that could prevent the other bits working properly? Some of the names aren't brilliant - I thought this would only take a few minutes to knock up!
Code:
// Drag cameron 2
a2.onPress = function() {
this.startDrag(false);
};
[code]....
I'm trying to create a jigsaw puzzle and need to show a text when the puzzle is complete. I can't solve it. I have 12 puzzle peaces and when all of them are correct placed i need the "Congratulation" text to show. Is there a easy AC snippet telling a text to show when all peaces are in correct x and y? The puzzle peaces are buttons and have instant names as, puz1, puz2 and so on....
View 2 RepliesI just went through the ActionScript tutorial for the jigsaw puzzle found here: [URL] I would like to change the image used for the background and the puzzle pieces, and am running into problems. I can change the background for the work area with no problem, but the puzzle pieces are still displaying the original artwork.
View 6 RepliesI am using the puzzle game sample from adobe and want to use it as part of an interactive narrative for students. However, everytime I try to go to new frame or scene the image stays with me. How do I remove or unload the puzzle frame and bitmap images so that it doesn't follow me. I am not a coder very confusing here is the entire script.
var puzzlePiecesArr:Array;var puzzlePiecesFound:Array;var topDepth:Number;var totalPuzzlePieces:Number;var correctPuzzlePieces:Number;var puzzleBmp:BitmapData;var intervalID:Number;var threshold:Number;var imagesArr:Array; var imageLoader:Loader;var requestURL:URLRequest; var puzzleBoardClip:MovieClip;var holder:MovieClip;
[code]....
I want puzzle in ActionScript 3.0 . Tutorial or Download Source.
View 4 RepliesI have a simple jigsaw type puzzle - only 4 pieces at the moment. The top left corner works ok - I copied and pasted the code and made the minor changes. The other 3 parts of the puzzle are causing a real puzzle for me. I've checked instance names, and everything else I can think of.
Is there something in the code that could prevent the other bits working properly?
Code:
// Drag cameron 2
a2.onPress = function() {
this.startDrag(false);};
a2.onRelease = function() {
this.stopDrag();
// Convert the slash notation to dot notation using eval.
if (eval(this._droptarget) == b_mc) {
b_mc._visible = false;
c2._visible =true;
a2._visible =false;
change_score();
}};
The fla is attached.
I am making a jigsaw puzzle in flash. But I have a weird bug. There are 25 pieces, 5x5. I am passing in the background bitmapData to the pieces as they are created.
For each piece I create a single puzzle-shaped mask bitmap.
So each piece contains a bitmap whose bitmapdata is the puzzle texture. And each piece has a mask piece.
When I just show the masks, all 25 pieces are drawn to the stage.
But when I use the piece masks to mask out the texture, I seem to have a hard limit to 22 pieces in which the mask is applied. This happens if I am using 25 peices or even 80 or 100. Each time, only the last 22 pieces created will display the texture. [code]...
make a classic 15 piece sliding picture puzzle. I need to shuffle the pieces in order to play the game and to do this have made an array of numbers 0 -14 and shuffled them. I then made a for loop which run 15 times using the pop method to take the last number from the array for each loop and store it in a variable shuffleVal. I have tested this and it works fine producing the 15 randomized numbers seperately, however when I try to use shuffleVal as a parameter for each Tiles boardPosition it only refers to the last value popped rather than each one from the loop. I have provided the code from my controller file .
CODE:-
import Tile;
import Jumble;
var shuffle:Array=[0,1,2,3,4,5,6,7,8,9,10,11,12,13,14];[code].....
Basically I was instructed to put this code into my main timeline:
function completedPuzzleCheck(){ // add this to your main timeline
if(!numCompleted){
numCompleted=1;
} else {
numCompleted++;
[Code] .....
It all works great but the issue (on a couple puzzles like this) is that a person could move one piece 8 times into the same correct position and the "Great Job" message will pop up although the puzzle is visually incomplete.
I'm trying to created iregular puzzle pieces from a picture(in flash cs5.5) can anyone sugest some ways of doing this?maybe a usefull link.I know how to make rectangular shapes,but i'm looking in creating iregular pieces.
[Code]...
I am trying to make a jigsaw puzzle where you can upload an image of a set size.Right now the only way I can think to do that would involve loading the same image for each piece, which I don't want to do for performance reasons.Is there a way I can make an instance of a movieClip the same as the instance of a different movieClip?
View 1 Repliesi've been asked to build a slide puzzle for an advertising company. While the puzzle itself will be straightforward they want it to thave a 'solve' button that shows the puzzle animating to the correct finish position from the positition the tiles are currently in (after the user has moved them around). It's a 4x2 grid puzzle.
Any thoughts on the best way to achieve this? Everything i come up with seems unneccessarily complex.
I have a problem with _droptarget. I created a puzzle in witch the target works. Now I want to load the puzzle into an other movie, lets say in _level100. Everything in the puzzle works, except for the _droptarget.
View 1 RepliesI am using AS2 and I am trying to make a simple 'game' for an assignment for school.I am first trying to make a simplified version of the game, to get some experience before I make the final version.
I will try to explain this simplified version:
The player has to drag an object in a big square and then release it. The object resamples 20 liter water. In total the player has to drag 100 liter water to the square, so it has to drag and drop the 'water' object 5 times.
I want some text in screen that says: You still need .
[Code]...
I'm looking to find and replace a piece of a url. I researched the site and found this piece of code
ActionScript Code:
String.prototype.replace = function(find, replace) {
return this.split(find).join(replace);
};
[Code]....
However, at run time it doesn't replace the "dev" with "www". It traces the function ok...
I have to make a a hyperlink from selected area over an external loaded swfI load the swf inside of scrollpane, but how can I let the user to create this area as big as he wants and how can I get its position after?
View 2 Replieshow do you extract something from a piece of string lets say my string is something like mc_empty3 or mc_empty11...how can i get a piece of script to remove piece of it?
View 1 RepliesI have just finished a word puzzle using Flash8.It works ok , but I wanted to add a sequence at the end congratulating the user after succeeding to solve the puzzle , something like : " Congratulations , you've won" , but I didn't succeeed to do that . I need somebody to give me a hand on what script I should write.
View 1 RepliesI'm currently working on a puzzle. The objective of the puzzle is to place the numbers in order from 1 - 10. Once the puzzle is complete you're taken to a specific frame.However, I want to be able to go to 1 of 2 frames depending on how long it takes to complete the puzzle.Each number has the following code:
on (press) {
startDrag(this, true);
}
on (release) {[code]....
I trying to make a game like Chicken Get Home.There a different type of levels in the game by arranging the tiles. I made the levels in the art and exported the array value by using mappy. ** How can we use the array value in our code and how to import those levels in the code
** How to move the tile with mouse only to blank position(ie like snapping to next tile)..
how to zoom into(hence zooming the map outward) set locations on a map, yet only those locations. I have a script which will zoom to your mouse location and also if I set the specific x and y, but still zooms when clicking on any other spot.
how do I zoom to only a set location and nothing else within a map/image.
I want to make a jigsaw puzzle in flash. I know how to create square kind of shapes. But I want to create this kind of irregular shapes. See the live demo of puzzles in the links shown
[URL]
I just want to how to create the irregular shapes.
I'm trying to create a simple 2D sliding puzzle in AS 3.0, but I haven't gotten further than splitting up the image and placing it into a grid. My main issue is to figure out how each panel will detect if there's a free space near it when you click them.
View 1 RepliesI have never done an expandable flash banner before and I am so stumped. An example of what I mean is here (top bwm ad): [URL] The main problem I am having is how do I get that expandable piece to show through like that? If someone could point me in the right direction
View 14 Replies