i'm trying to remove a function from a movieclip, is there a way of doing this, so I keep the movieclip on stage but removes the onPress etc? I'd also want to be able to reapply that function the movieclip later.
View 2 Repliesi am trying to draw continues line one point to another by mouse click , and each points there will be a round shape(using linkage library method) with the mouse click .the lines all are removed by this (_root.newgrid1.clear()) method.the problem is that i was only able to remove one round shape from the stage using remove movie clip method,ow can i remove all the attached movie by the reset button from newgrid2?
################################################## ##
this is the method i used to remove the clip
_root.reset.onRelease = function ()
[code].....
Q1) The registration point of a created clip is top left - my question is how can I dynamically change it's registration point - say to center center?
(I am trying to attach a movie clip to a created clip and I wanted it to be centered inside the container - a related sub-question, how can I find the x-y coordinates of the attached movie clip within the created movie clip?)
Q2)When I tried to create two different movie clips, I found I had to create them at different depths, else the first would load and the second would not. Why would that be so? I'm on MX 2004 Pro.
I have as3 flash page in that page I have two buttons with each calling an external .swf file. What I want is when I call in the second .swf or vise versa is for the 1st .swf to disapear so it is not sitting under the 2nd. swf. I want the movie clip to dissapear because if it has sound in it it will play even if the 2nd .swf is clicked. The code that I'm using is
var image11 =new Loader();
lights_btn.addEventListener(MouseEvent.CLICK, greenmove11);
function greenmove11(event:Event):void {
[code]....
So how can I make it so that when I press fireworks_btn that the light.swf disappears?
Im pulling images from an xml file and I want to attach an onRelase and onRollOver event to each one, but it's not working
var thumbWidth = 24;
var thumbHeight = 24;
var xml = new XML();
[Code]....
I've attached a movie clip using the attachMovie method. I was wondering if it's possible to handle the attached movie clip... I don't know if I'm expaining this correctly but I'd like my movie clip to perform some simple actions (gotoAndPlay, Stop)This is my (lame) script:
//Ataching clip
this.emptyClip.attachMovie("photo001","Img001",get NextHighestDepth());
//Action for the attached clip
this.emptyClip.gotoAndPlay("starting");
How do i change movie clips inside MC3?lets say i have a button called but1 inside MC3, how do i make his enabled=false?
View 6 RepliesI copied this code from the web that creates snow and I have this code on frame 100. I want to remove this movie clip when it starts back again on frame 1.
[Code]...
Basically its an onPress event handler on a movie clip that attaches another movie to it when pressed.The problem is, I only want the movie clip to be attached once in the designated x,y coordinates, no matter how many times the main object is pressed. I'm essentially trying to write my own FreeTransform script, that allows users to resize the object.
Below is the my source code:
ActionScript Code:
chair_mc.onPress = function() {
var bounds:Object = chair_mc.getBounds(this);
//
[code]...
I have a series of mc's I'm attaching from the library, with buttons in the main movieInside each of the attached mc's is a close button that needs to close the attached mc and launch a function in the main movie, but I'm having trouble addressing the button inside the attached mc from the main timeline.I've tried this:
Code:
calloutHolder_mc.attachMovie("mar01callout", "callout_mc", 0);
calloutHolder_mc.callout_mc.close_btn.onRelease = function(){
[code]......
I'm quite new to A.S and lately i got a problem when trying to trace the info of an attached movie clip.I created 2 movie clips named "test" and "testChild". In actions frame of "testChild" i put this:
[Code]...
Say I can create 200 different movie clips on the stage when I press a button and want to destroy them when I click on them, how would I do this.
[Code]....
I currently am creating a game where you shoot at targets that randomly appear. I have them set to be randomly generated via an attachMovieClip object, and all works well... EXCEPT that whenever it generates the clip from the Library, the instance is WAY above the rest of movie (layer-wise)!
This means that my custom-crosshairs cursor, for instance, is always behind the target and thus the user cannot mouseDown and shoot it.
I have an AS3 project (publishing to FP10) where I load a custom made window from the main movie. The custom made window is saved in the Library and has a close button (called exitinteraction_btn).
I manage to load the window from the main movie with the following:
var WinA = new windowa(); addChild(WinA); var myTween:Tween = new Tween(WinA, "x", Elastic.easeIn, 175, 175, 5, true); var myTween:Tween = new Tween(WinA, "y", Strong.easeIn, 175, 175, 5, true);
This is the code in my custom window (which I cannot manage to close and have it remove itself from the main movie when clicked):
exitinteraction_btn.addEventListener(MouseEvent.CLICK, closeI);
function closeI(e:Event):void{ this.unloadAndStop();
}
I get the following error:
TypeError: Error #1006: unloadAndStop is not a function. at windowa/heyb()
How do you remove each attached/duplicated movie clip on the screen?
Is there an easy script for this?
apply actions to an attached/created movie clip at runtime? I.E. You use attachMovieClip to attach a clip, and then you add a startDrag/stopDrag system to it dynamically.
View 3 RepliesI'm trying to get in the habit of using AS in the first frame on the main timeline as much as possible. but sometimes i hit a snag. like getting a movie clip to change it's alpha when it hits a certain frame in an attached MC.
View 8 RepliesDoes anyone know a way to apply actions to an attached/created movie clip at runtime? I.E. You use attachMovieClip to attach a clip, and then you add a startDrag/stopDrag system to it dynamically. Is it possible?
View 3 RepliesI am using CS3 with Actionscript 2.0I am trying to get a play / pause button to control a movie clip.I have placed the MC on one layer and the button on another layer.The button works great.All I need is the AS to control the timeline of the movie clip.
View 1 RepliesI created a movie clip (mcPopup), deleted it from the stage, and set it to export for ActionScript. I then set up the movie to attatch the clip to the stage and then load a JPEG image into it. Now, I need to be able to let the viewer dismiss the popup, but I cannot figure out how to add an event listener to the movie clip. I tried several different ways, but the popup doesn't seem to be clickable and doesn't respond to clicks (perhaps the image is in the way?) Here is what I have for the code for the thumbnail the visitor clicks to open the popup:
on (release)
{
_root.attachMovie("mcPopup", "popup_mc", _root.getNextHighestDepth());
[code].....
How do I remove a movie clip from the main movie?I've tried setting the alpha,but technically it is still there.Removing and deleting movie clip only works if the movie clip is duplicated and I don't want the movie clip duplicated.
View 1 RepliesIm using this code to generate an empty movie clip that loads an external .png file:
_root.createEmptyMovieClip("container", 1);
container.createEmptyMovieClip("mc", 1);
container.mc.loadMovie("STEVE_big.png");
container._x = 550;
container._y = 5;
Im having is that if I navigate to another scene the movie clip/image remains on top of the new scene. This particular scene has four buttons that jump to different frame labels in this scene. There are also two buttons at the bottom of the page that take you to a new scene. Ive tried multiple lines of code to terminate the image or movie clip when the user navigates to another scene or page. But it just remains.
Using Flash CS3 and as2.
I'm trying to get my movie clip to appear after 1 second then disappear after five seconds.
In it's class action script file I have this code which should remove the clip 5 seconds after it loads:
class monktainer extends MovieClip
{
function destroy()
{
[Code].....
I have attached a duplicate movie script action on a button to create a new copy of the clip (F900) with each press. This seems to work well; however, I can not, for the life of me, figure out how to create the script to remove the duplicated movie clipHere is the script I am using for the duplication and I did also attach the fla file:on (release) { _root.F900.duplicateMovieClip ("F900_"+"x", x ); setProperty ("F900_"+"x", _x, 300);setProperty ("F900_"+"x", _y, 200); x++;}Once I figure this out I would like to add different aircraft to it but that is not terribly important right now.
View 6 RepliesI have a problem and I would like to understand it for once and for all ecause I run into this problem all the time.I added a movie clip in frame 2, now I have 7 more frames, I have a nav menu that goes to each of those frames, I want to remove the movieClip I created in frame 2, I want to remove it from all the movie after frame 2, I wrote:
removeChild(field);
in frame 3, it does remove the mc in frame 3 but not in frame 4 5 6 or 7?
I have a timeline with 12 frames, in frame 7 I added a movie clip to the stage:
var pContainer:MovieClip = new MovieClip;addChild(pContainer);var myLoader1:Loader = new Loader();pContainer.addChild(myLoader1);var myRequest1:URLRequest = new URLRequest("flash/products.swf");myLoader1.load(myRequest1);pContainer.x =
[code].....
I have a simple Flash website with the sections laid out the timeline with labels In one section called Media, I have a movie instance of a Flash movie gallery player. It loads just fine but when I leave that section to go to another, the sound of the video is still playing Visually it's not seen but the sound still plays.I suspect I need to put some sort of remove commamnd in the script but I'm having trouble getting the right result
View 2 RepliesI created a movie clip of a photo gallery that works fine until I test it and get to the frame that the movie clip is on. After doing so, the movie clip stays throughout any other page I click on. I can't get the removeMovieClip function to work.
Here's the code I have:
this.createEmptyMovieClip("container",1);
var imagesNumber:Number = 5;
for (i=1; i<=imagesNumber; i++) {
[code]....
When i click an image i want to attach a animated movie clip with that image, i tried attach movie for that concept and its working fine, but i want to remove that animated movie clip when the same image is clicked again, how to check whether the animated movie clip is attached with the image
View 2 RepliesI have two clips on the stage with mouseover and mouseout actions. When you roll over a clip, a new clip is created and added to the stage. I then use the drawing methods to draw a callout.It works fine the first time, but when you roll over the second clip, the drawing for the previous object is not erased and it adds to the drawing with the information from the second rollover.
Code:
node1.buttonMode = true;
node2.buttonMode = true;
[code].....