ActionScript 2.0 :: Retaining Order Of Files Loaded Externally From Large XML Files
Jul 18, 2006
I was messing around with some old examples, and I ran into an unfinished example where several 30k-100k XML files are loaded and stored as a string into an Array. The code looks basically like:[code]Basically, when I trace the 'this', the order of the files that are loaded is off. Out of about 10 tries, about 3 times the order is perfect. The remaining 7 times, the order is a bit off. Does anybody have a suggestion on how to ensure the files are loaded prior to the next file being loaded? I tried placing a while loop that basically delays the clock for a few milliseconds, and that didn't work either. Besides, that is not really a good solution to arbitrarily waste clock cycles.
I have the action script that loads external SWFs on a button click, but I don't know how to make it so that the slides switch after a few seconds on their own as well as on a button click. I know it has to do with a timer - but I have no idea how to do that (i'm super new to AS) Can someone please either tell me what code I need there or direct me to atutorialHere's the code I'm using so far:
var Xpos:Number = 0;var Ypos:Number = 0;var swf:MovieClip;var loader:Loader = new Loader(); var defaultSWF:URLRequest = new URLRequest("swfs/one_btn.swf");
I'm trying to put together a flash portfolio which contains a page with multiple swf files loaded externally, I've managed to follow a tut and works fine..except, the loaded swf video loop, and as I navigate to other pages the sound plays through. I tried the unloadAndStop technique which helped but didnt stop the loop, i even added a
I've developed an application which uses a (dynamic) XML file to load in several files; a maximum of four MP3 files and a number of JPG files.When everything has finished loading, the user can press a "Play" button. The application could be described as a "mixer"; it's used to give online music lessons and to facilitate this, the sheet music is loaded (cut up into into several JPGs) which move horizontally on the screen like a marquee, while the music it represents begins playback. The music exists of several MP3s so that the user can mute (e.g.) the vocals or the drums, allowing him to focus on (e.g.) the guitar.
So what's going wrong, is that the audio files are not playing in sync. They are all pre-loaded so any delay between files shouldn't be sought in the files not being fully loaded yet. For initiating playback in the application, I'm using a simple function with a for loop in it, which sets each instance of my sound class to start playing at position 0 of its timeline (I've added in highlighting for all of the "code" blocks in my post, to keep everything easy to read through):
Code: function playSounds():void { for (var iCnt:Number = 0; iCnt < aSound.length; iCnt++) { // Start playback for each sound, at the time position set in the
[code]....
Seeing as this didn't work, I have no clue what I could give a shot next... so if anyone has any ideas or suggestions, it would be greatly appreciated! Something else I noticed, was that if I run the application on very fast PCs, the MP3s are almost always in sync, but the PC that I'm developing on isn't that sluggish either and they hardly ever run in sync on it - so it will form a problem for pretty much all of the people who will use the application.
I am creating a slide show that loads external SWFs on a button click as well as switching slides automatically.. This is pretty much the exact example of the functionality:
[URL]
I have the action script that loads external SWFs on a button click, but I don't know how to make it so that the slides switch after a few seconds on their own as well as on a button click. I know it has to do with a timer - but I have no idea how to do that (i'm super new to AS) Here's the code I'm using so far:
var Xpos:Number = 0; var Ypos:Number = 0; var swf:MovieClip;
iam streaming my web cam to FMS .... i have got a latency of 1 -2 second,,,,,, What should i do to reduce the latency,,,,,, is ter any change i can make in FMS files(xml files) in order to reduce the latency......
i have a swf file which is a framework file done in puremvc and i m loading multiple swf files. one of the swf file loaded into the main swf file loads multiple sub swf files in it. works fine but in the loaded swf file which loads multiple swf files in it.. button dosent work at all. i m not able to click on any button. i m jst making a tree structure so can be easily understood..
container swf -> external swf -> miniSwf file and in miniSwf dynamic button are not clickable but they have all the Mouse eventListeners.
I am loading 2 external text files into my SWF.. I believe that my action script is correct as it works pefect offline.. However as soon as I uploaded it to my webspace, both text boxes have the "undefined" text sitting there.. The problem doesn't exsist when I only have 1 external text file loaded..
//load 1st text file myData1 = new LoadVars(); myData1.onLoad = function() {
I'm loading swf's via an XML file. I'm wanting them to be added onto the stage in the same order that they appear in the XML. The problem that I'm having is that they are added to the stage only when they are fully loaded.
For some reason my slideshow gallery will not work with specific swf files. I can't find any correlation between the ones that work and the ones that don't work - stage size, length, as3 version, actions, ect don't seem to matter.
I'm tempted to chalk to up to a bug in CS4 and try to install CS3, but I was wondering if anyone has ran into this before.
I've built loads of preloaders in AS2 before. However I never ecountered so many problems as now. I'm confused about many things with preloading in AS3. This is my layout:I have a single frame on the first scene of my movie. The main content is inside a movieClip called container, placed on frame 1 of my next scene, which inherits from the class that holds the main code to initialize the game.(I read that this way my code will not try to access any movieClips, or sprites before they have been loaded... as they are not actually referenced from a document class).However my 1st frame where I have my preloader takes ages to load... My first question is... Does this happen because the loading procedure is different now? Or has it always worked like this... so that would mean that as I have many heavy assets in my library that are meant to load on frame 1. (Exported for actionscript in properties).I have a blank movie for a while. I'm using a simple code:
What are, nowadays, the best practices for uploading a large file (which may cause a timeout) with ASP.NET Web Forms and/or MVC? Increase Server.ScriptTimeout (only for the specific POST request); Use some flash client-side uploader like swfupload ([URL]) or plupload ([URL]), but Flash uploads have some issues with proxies; Use some gmail-like javascript (like [URL]
I have a site that deals with large video files (sports videos). The site allows users to upload any source file, but most of the videos come from DVDs. I am currently using a modified version of jumploader to encode and upload files to the webserver with an HTTP request. The jumploader is a java client, and looking at my webstats, only about 75% of my users have java installed.
What I want: I have looked for a flash based uploader that transfers a byte stream to a server. Byte streams would be ideal so I can capture partial videos for failed uploads. I have also looked for flash-based ftp clients, but I haven't found anything promising. There are some flash-based uploaders that post via HTTP, and I'm considering this. I do not want to use a simple file post. Some upload methods also put the full file into memory first, and this obviously is not an option for me.
I'm writing a small mp3 player. It reads the playlist from an xml file, then at the end of a song (or when the "Next" button is pressed) automatically plays the next song in the list.My problem is that if the song is a large file (around 16MB), the player doesn't play the song -- I have to click pause then play a couple of times to play it.
The code is roughly:
Code: function playSong():Void { tune = new Sound();
[code]....
where 'tunes' is an array of paths to the file. I've missed out a couple of things, but that's basically it. Is there an issue with loadSound needing to load some of the song first?
I have to work with arather large XML file (about 25Mo).From that XML file (which I CAN'T touch in any manner), I actually need only a couple attributes in each nodes.Parsing the whole XML to load the data will (of course) lead to a "A script in this move is causing Flash Player to run slowly..."Ideally, I would like to browse the XML, only parsing data needed (like you would do in a database...without having to load the whole database before ;-)But I think this is not possible? Isn't it?So, I was wondering: why shouldn't I treat it like a text file, reading it and taking only the info needed from the file?The problem is that I don't exactly see how to do ;-)Following is a copy paste of the first node only...how would you do to read this text and put in an array:name, cloneof and description?etecting the node name, checking that it exists(i.e 'cloneof" isn't present in each node), and filling the array with the value
Code: <game name="puckmana" sourcefile="pacman.c" cloneof="puckman" romof="puckman"> <description>PuckMan (Japan set 2)</description>
I'm writing a small mp3 player. It reads the playlist from an xml file, then at the end of a song (or when the "Next" button is pressed) automatically plays the next song in the list. My problem is that if the song is a large file (around 16MB), the player doesn't play the song -- I have to click pause then play a couple of times to play it.
The code is roughly: function playSong():Void { tune = new Sound(); tune.onSoundComplete = playSong; tune.loadSound(tunes[++current],true); }
Where 'tunes' is an array of paths to the file. I've missed out a couple of things, but that's basically it. Is there an issue with loadSound needing to load some of the song first?
TypeError: Error #1009: Cannot access a property or method of a null object reference. at Handle() at flash.display::Sprite/constructChildren() at flash.display::Sprite() at flash.display::MovieClip() at Gallery() TypeError: Error #1009: Cannot access a property or method of a null object reference. at Gallery()
I made a 1.swf file to call my other 2.swf file externally and my 2.swf is using a class. In my 1.swf code is just like this ActionScript Code: var pic1ldr:Loader = new Loader(); trace("1"); var thumb1Req:URLRequest = new URLRequest("gallery.swf"); trace("2"); [Code] .....
Is it possible for in a website to start loading a file after it's loaded the initial setup, so that when the user clicks to see the larger file, it's already loaded, or at least part of it's started loading, all without totally stopping other basic rollover functions and so on that appear with the initial setup?
I need a flash uploader, to use it in my CMS project. I need something like this, but with greater max upload size (it doesn't allow to upload files larger ini_get('upload_max_filesize')).
My server doesn't allow me to overwrite ini settings, so I'm looking for an uploader which can upload large files independently from the ini settings.
I'm working together with some designers to build a project in flash CS4. They normally send me their work as either jpg's or png files. When importing a sequence of png files I find that flash slows down considerably... but not only that, when I try to copy and paste a symbol that contains transparent png in their timeline it crashes. For instance if I select a frame which contains a movieclip with png's inside from the general timeline, and try to paste that frame on another layer I will get a message of Flash stopped working and eventually it just closes down. I tried this on a version of Flash CS5 and it also has the same problem but worse, as soon as you press Control + C the whole thing closes down. I'm suspecting this is caused by large transparent png files, but I'm not sure.
I built an uploader which works fine on decently sized files.
When I upload say a 2mb picture however, everything appears to be working fine - all the progress indicators, on completes operate as usual.... but then the file never shows up on the server?
I realize this is pretty vague, lacking code examples, but I just wanted to kind of put a general question out there, see if anyone suspects anything right off the bat..
ie, is it maybe something more wrong with my server? flash dosent have some upload limit i dont know about?
In AC2, I am trying to load .swf files in to a movie.
I know how to load them, and I can load them at random. But what I want to know is, if I have say 500 movies, named movie_0.swf movie_1.swf movie_2.swf etc...
is there a way I can load them ten at a time, in order of highest number to lowest number. In a specific location.
In other words, I want to be able to have many external swf movies, about 400px wide by 100px tall, and load 10 at a time in to a 800px wide by 1200px tall movie, 10 movies at a time, in order of highest to lowest movie name number. Each in a specific place, with a next and precious button to show the next 10 or last 10.
Im basically working on my first site, and want to use something like this so I can show my latest articles first when someone clicks on the articles section of the website.
Now resolved with AS3
PHP Code:
var loaderone:Loader = new Loader(); loaderone.contentLoaderInfo.addEventListener(Event.COMPLETE, loadedone); loaderone.load(new URLRequest(prefix + totalfiles-- + ".swf")); function loadedone(one:Event):void
Im have 5 swf files that I want to play one after another on my home page.
I would like to have the first movie load and play and while that is going on have the others downloading in the background so they are ready to start when the first movie finishes.
After the 5th and last movie has played I would like it then to return to the first movie and just loop this process continually.
I have attached what I have at the moment which is a file called demand.fla that uses buttons to load in demand001, demand002, deamd003 etc.
Ideally i would like demand to load in each slide automatically and then have flashmove onto the next one after 5 seconds or so.
I've run into some problems trying to handle large text files in AIR (300+ MB in size). I can open a filestream and read the file just fine and even store it into a string variable. the problem occurs when i try to manipulate this data. Im trying to get each line as an element in an array so i can manipulate this data.Here's what i've tried:1. read the file into a string variable and perform a split looking for the newline character ). this freezes the program2. i've tried reading the file in one byte at a time and putting each line into an array AS it is being read from the filestream. This not only takes long but eventually freezes.
3. i've tried splitting the final string variable which contains the entire text file into chunks to process it separately.4. i've even tried putting the file contents into a sqlite database, but this also freezes.At this point, im not sure what my options are. Is AIR even equipped to manipulate data at this level? I could use a point in the right direction
I had to manipulate a large number of XML and GIF files. In this case I will need to use a compressed file, like zip. if the flash can access this type of data like the Java do.
My company is working on a casual game which is entirely made in Flash. To speed up development/compile time we split some of it up into SWC files, for example dialog controls, cutscenes, particle effects are all controlled via SWC files. This was working great up until a few days ago, we have been working on this project for about 8 months with no major problems. However, now all of a sudden, when we compile the game, none of the SWC files work. The game compiles and runs ok, but nothing from the SWC files are working.
The strange thing is that if we remove one of the SWC files from the folder (the game reads all the SWC files from one folder) then the game will work. Even if you remove a SWC which isnt immediately used by the game it will still work. It's almost as if there is some limit to how many SWC files you can have loaded. (There are only 10 SWC files in the folder we are loading from).
I am embedding the sowpods dictionary into an array in AS3 then submit searches using indexOf() to verify existence of the word. When I load a smaller text file it seems to work but not the larger. Since the file is embedded during compile, there shouldn't be an event for loading to listen to right?
Code:
package { import flash.display.MovieClip; public class DictionaryCheck extends MovieClip {
