Alright, I know how to make a scrollbar but how do I tell "him" to scroll on his own?m using this code:
scrolling = function () {
var scrollHeight:Number = scrollTrack._height;
var contentHeight:Number = contentMain._height;
[code].....
I have a sliding scroll bar which responses to the mouses movement (as seen on link). [URL]. How do start to embed buttons within the movie clip so it stops and goes to another animation/movie clip?
View 2 RepliesI'm working on a sliding featured gallery like Kongregate.com or Hulu.com uses on their home pages. What I have so far is here:URL...Where I am running into trouble is in the loop around/wrap around areas. My next and previous buttons tween to the next/previous item just fine. However when I get to the last/first, it gets tricky.What I have done when you get to feature #5 is check for the x position, and if I am going beyond 5, I reset it so that we pull in #1 instead. The problem is that this scrolls in #1 from the wrong direction. (Take a look at the SWF above to see what I mean).If I shoot further back in negative X direction and scroll that way, I'll end up with blank space at the start of the move. I could dupe #5 and put it there, but then I have two versions of feature #5 (and #1 for the wrap the other way) that have to be maintained. (Note these will be more than just a blank square obviously, they will each be movie clips that do things).
Possibly that is the correct way? Or am I going about this the wrong way. Would it make more sense to dynamically create, scroll and remove the clips on each button click? (I'm not sure how I would do that exactlyI suppose I could also add the buttons via actionscript too, instead of placing them in a layer and them zipping them to the top, although I'm not sure it matters much.[code]Also one other thing, I note that if the user clicks one of the buttons before the tween completes, it throws the whole thing off (since it grabs the x value when clicked) - is there a way to disable the buttons until the tween is complete?
I'd like to use a gallery similar to the one atfor a gallery I am creating. I have an idea of how the horizontal motion would work using a timeline but does anyone have an idea of how I could use actionscript to move the movieclip horizontally so that each image is centered or using a tween class?
View 40 RepliesOriginally Posted by stringy ee if this something like you want
Code:
var buttonNames_array=[]
for(var j=1;j<4;j++){
buttonNames_array.push(this["but"+j])
}
[Code]...
I have even tried duplicating all the relevant MC's and updating the code to read lets say:
scroller and scroller2 etc
Does it require some kind of resetting of information to accept new referencing to images? I cant see why it should'nt work
I've downloaded and slightly modified the Photo Gallery with Thumbnails .fla file. It works fine, except when you mouse over the right side, it keeps scrolling until all of the thumbnails are off the screen. Going to the left, it works fine, stopping when you reach the first thumbnail. On the original, it works as it should.
View 1 RepliesDoes anyone out there have code for an XML gallery that arranges the sliding thumbs in a grid of many rows and columns instead of a single row?
View 6 RepliesI've got a problem. I have to make gallery like [URL]
View 1 RepliesI have build a gallery but its very simple. It takes images from xml file. I have attached all files in zip. First when I press next button it goes to next image but with no effect. It just displays next image. I want to incorporate a sliding effect when the image is changed to another. And second I want to use autoplay feature. As soon as swf starts the images came one by one with difference of few seconds.
Attachments: slideshow.zip (752.0 K)
I am looking for the Action Script that will allow me to set up a horiz. set of images and use the mouse movement to move the band of images left or right. Upon clickin on the image I will have a link to other views.
View 3 RepliesI'm looking to produce an image gallery exactly like the sliding panels here [URL]
The total length of the images are greater than 2880px (Flash's max stage width).
I have a sliding photo galley with a previous and next button. I have added action script to tell the linked pictures to slide along and for the next button its fine (I took the script from a forum...as you do). I put stop commands on the key frames over the next picture, Now if I am on the 4th image and click previous, its goes all the way back to the start!
stop()
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
}} next_btn.onPress = function(){
rewind = false;
play();
} prev_btn.onPress = function(){
rewind = true;
}
I'm trying to make a site with a photogallery that has sliding thumbs in the bottom corner ("slidingOut_mc"). I've got them sliding from right to left with a simple tween that is infinite. The problem is that I have a left arrow and right arrow that I want to slide the thumbs in reverse (left arrow i.e. "back_btn") or at double speed (right arrow i.e. "forward_btn") on a roll over of the button. I used the ENTER_FRAME thing to get the mc to reverse with prevFrame when rolling over the "back_btn" but I can't get it to stop when I roll out.
This is what I have so far...
back_btn.addEventListener(MouseEvent.ROLL_OVER, backF);
function backF(event:MouseEvent):void{
slidingOut_mc.addEventListener(Event.ENTER_FRAME, everyFrame);
function everyFrame(event:Event):void{
slidingOut_mc.prevFrame();
[Code] .....
It tells me the "everyFrame" is an undefined property. I think and hope the problem should be obvious to those who know more than me. Do I need some sort of import at the very start of it all?
I have a sliding thumbnail gallery which when a thumbnail is clicked loads an external .png into a container with an instance name of mycontainer which I have on the stage in the .fla. Its added like such:
When the Loader's (which I gave an instance name of imgLoader) complete event is called the function onLoaded loads it -like this: mycontainer.addChild(imgLoader);
I also added a mask(stageMask2) to mycontainer which is the same size as the external .png--I then used this code imgLoader.mask=stageMask2; to mask the .png. I did this because I added a zoommc function which enlarges the imgLoader and wanted to keep the visible size of the container the same. I would also like to be able to drag the zoomed image. I don't want to drag mycontainer as it contains the mask and I cant drag the imgLoader as it doesn't have that property--Do I need to put the imgLoader in another container?
Here's the problematic code:
var stageMask2:Sprite = new Sprite();
stageMask2.graphics.beginFill(0x183045,0);
stageMask2.graphics.drawRect(swfX,swfY,604,403);
stageMask2.graphics.endFill();
var closeWin:TextField=new TextField();
[Code] .....
I want to make a sliding gallery that plays a certain amount of frames and stops. I have this script
[Code]....
Instead of play() i have tried putting a counter in like counter 8 but it does not work.
The idea is that if i click the contact button but im on the home page its scrolls over all
other pages and stops on the home page.
I just pulled together a picture gallery, where the pictures simply scroll across the screen using arrows. I used the template from [URL] The problem is that when I added my own pictures, the graphic symbol was obviously a different size from the original template. So when the images scroll they should stop at a certain point as to not show any empty space. I changed the values that i guessed were the ones setting up where the graphic has to stop at, but it doesnt seem to be doing anything. The code below is the only script of any importance, at least that I know of. The other stuff just points to targets and gotoandplay stuff.
View 3 Replies[URL]Basically, I would like to have an xml gallery, grid alignment... and to be able to use an actual scrollbar to look through the thumbnails.I tried to do this at home but got weird results, IE when scrolling down the thumbnails would actually scroll up etc.
View 6 RepliesNow, I've seen Scotty's image resizing gallery thread and love the gallery with scrolling thumbnails. Unfortunately, on my site, I have a lot of wide images that can not be shrunk down without losing valuable details. So my question is, is there ANY way to make an XML image gallery that will apply a scrollbar to an image if it exceeds a certain width?? My images are wider then the website so I will need to apply a scrollbar or scroll pane no matter what but it would be ideal to have it done where I can load the images via XML
View 1 RepliesI bet you can't solve this one! I am using AS2 to make a full screen gallery like this: [URL].. and I'm having some problems:
1) MOST IMPORTANT: When the gallery is loaded in a smaller browser window, then the browser window is maximized, the scroll bar doesn't work properly when clicked. The scroller moves, but not to the position at which the user clicks.
2) LESS IMPORTANT: When the user mouses over the scroller and scroll bar, I would like their alpha/colour to change (preferably fade in and fade out).
3) LEAST IMPORTANT: Is it possible to use a graphic for the scroller?
[Code]...
i followed a tutorial on line that showed me how to create a scrollbar gallery with the use of only action script and xml, i also looked at another tutorial that allowed me to be able to use thumb nails to change the images been displayed. now i'm trying to modify the former tutorial gallery i made to include this function by using my already set images as the thumbnail and when this images are clicked i go to the next page or frame and display the corresponding image. i have been able to get the images clickable but i can't seem to get the image to be displayed. here is my code and my xml file here. even if its an idea i wouldn't mind. been at it for 2weeks now and i can't seem to find a solution.
PHP Code:
stop();import mx.transitions.Tween;import mx.transitions.easing.*;//maincodevar myGalleryXML = new XML();myGalleryXML.ignoreWhite true;myGalleryXML.load("test/gallery.xml");m
[code].....
I have made an XML Gallery in Flash but there is a problem, it works very well however some of the photos are portrait and this causes a problem as gaps are created between photos.Here's the code:
ActionScript Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;[code]...
how to make image gallery with thumbs and horizontal scrollbar. if images are more that three scrollbar is shown otherwise it will hide.
View 2 RepliesI�m trying to get my horizontal scrollbar gallery images to link to different url�s, but having some trouble getting more than one url to open, they all link to the same site.
View 5 RepliesI'm working on a sliding featured gallery like [URL] or [URL] uses on their home pages. What I have so far is here: [URL] Where I am running into trouble is in the loop around/wrap around areas. My next and previous buttons tween to the next/previous item just fine. However when I get to the last/first, it gets tricky. What I have done when you get to feature #5 is check for the x position, and if I am going beyond 5, I reset it so that we pull in #1 instead. The problem is that this scrolls in #1 from the wrong direction. (Take a look at the SWF above to see what I mean).
If I shoot further back in negative X direction and scroll that way, I'll end up with blank space at the start of the move. I could dupe #5 and put it there, but then I have two versions of feature #5 (and #1 for the wrap the other way) that have to be maintained. (Note these will be more than just a blank square obviously, they will each be movie clips that do things). Possibly that is the correct way? Or am I going about this the wrong way. Would it make more sense to dynamically create, scroll and remove the clips on each button click? (I'm not sure how I would do that exactly)
[Code]...
That said, I would like to alter some of the code to allow the thumbnail scrollbar to begin scrolling once the page has loaded. Here is what the code looks like as it is right now.
[Code]....
I'm creating a scrollbar gallery from a tutorial on this site. Though I've completed the tutorial, and customised the gallery to my own needs, however I'm trying to make a very small change to it - and no matter what I do, keep running into problems. I'm trying to replace the rectangular handle with my own customised handle - a (20 x 20) 'circular' png image that I've imported into Flash, made a graphic and stored in the library (though I understand it can be imported using actionscript, like the other images in the gallery).
[Code]....
how I would convert this vertical scrollbar into a horizontal scrollbar
heres the code:
onClipEvent (load) {
diff_y = bound_box._height-scroller._height;
bounds = bound_box.getBounds(this);
top = bounds.yMin+(scroller._height/2);
bottom = bounds.yMax-(scroller._height/2);
[code]....
What I want to do is to make a gallery based on the tutorial gallery here (thumbs), but I want the user to be able to choose different galleries from within the movie. I figured that I could make a loop to cycle through the galleries, then nest another loop inside it to cycle through the pics, captions and thumbs. While I wrote, I constantly tested the output with trace commands, but when I tried nesting the loop I lost all output.. I'm pretty new to both Flash and Actionscript, so if theres an obvious solution I havent been able to see it.. This is my temp XML file:
[Code]...
Im using a dock gallery fx from flash xml components. But for some reason when I preview in browser the dock gallery scales out of the swf area. This doesnt happen if i change the p[ublish setting to match movie. But if the publish setting is set to perscentage gallery scales.
View 3 Repliesi was looking for gallery looking like this site [URL] i was looking gallery first page title gallery then Big image like this with description.
View 1 Replies