I'm looking to produce an image gallery exactly like the sliding panels here [URL]
The total length of the images are greater than 2880px (Flash's max stage width).
SO, it's been a while since I've done actionscript 3 again, been mostly busy with iOS programming..Anyway, what I'm trying to create is a sliding panels.So far they work but I'm having some troubles, And everything I try does not do what I want hehe.
The panels work, I generate 5 of them in a for loop, they slide open and close when clicked using greensock.But, They all have a label, which needs to slide with it instead of staying on the same position.Plus, I have a if/else to check if a panel is open, but I want to check this individually instead of overall.
The full code is:
import com.greensock.TweenLite;
import flash.geom.ColorTransform;
import flash.text.engine.TabStop;
[cod]....
Flash stage width is limited to 2880px. Is there a way to do sliding panels http://www.kirupa.com/developer/flash5/slidingmenu.htm with 5 large panels eg. 5 x 1000 = 5000px?
View 3 RepliesI am working with a downloaded component that moves separate panels horizontally with an ease. there are 4 panels and they are controlled by 4 buttons to make them move.The code for the panels is:
onClipEvent (load) {
targetx = 46.0;
delay = 8;[code]...
T
he code for each button is:
on (release) {
menu.targetx = 46.0;
}
The value changes with each button to move the panels.My question is the buttons are actually buttons and I want to make them into movie clips but when I do that and apply the same code it does not work. Can this only be done with "buttons"? I am trying to create a portfolio section that slides from panel to panel by thumbnails and left and right arrows.
I am looking for the Action Script that will allow me to set up a horiz. set of images and use the mouse movement to move the band of images left or right. Upon clickin on the image I will have a link to other views.
View 3 RepliesI am trying to produce a photo gallery with thumbnails. I cant work out whats wrong i keep getting these 2 compiler error codes, 1021: Duplicate function definition & 1023: Incompatible override.
View 17 RepliesI'm working on a sliding featured gallery like Kongregate.com or Hulu.com uses on their home pages. What I have so far is here:URL...Where I am running into trouble is in the loop around/wrap around areas. My next and previous buttons tween to the next/previous item just fine. However when I get to the last/first, it gets tricky.What I have done when you get to feature #5 is check for the x position, and if I am going beyond 5, I reset it so that we pull in #1 instead. The problem is that this scrolls in #1 from the wrong direction. (Take a look at the SWF above to see what I mean).If I shoot further back in negative X direction and scroll that way, I'll end up with blank space at the start of the move. I could dupe #5 and put it there, but then I have two versions of feature #5 (and #1 for the wrap the other way) that have to be maintained. (Note these will be more than just a blank square obviously, they will each be movie clips that do things).
Possibly that is the correct way? Or am I going about this the wrong way. Would it make more sense to dynamically create, scroll and remove the clips on each button click? (I'm not sure how I would do that exactlyI suppose I could also add the buttons via actionscript too, instead of placing them in a layer and them zipping them to the top, although I'm not sure it matters much.[code]Also one other thing, I note that if the user clicks one of the buttons before the tween completes, it throws the whole thing off (since it grabs the x value when clicked) - is there a way to disable the buttons until the tween is complete?
I'd like to use a gallery similar to the one atfor a gallery I am creating. I have an idea of how the horizontal motion would work using a timeline but does anyone have an idea of how I could use actionscript to move the movieclip horizontally so that each image is centered or using a tween class?
View 40 RepliesOriginally Posted by stringy ee if this something like you want
Code:
var buttonNames_array=[]
for(var j=1;j<4;j++){
buttonNames_array.push(this["but"+j])
}
[Code]...
I have even tried duplicating all the relevant MC's and updating the code to read lets say:
scroller and scroller2 etc
Does it require some kind of resetting of information to accept new referencing to images? I cant see why it should'nt work
Alright, I know how to make a scrollbar but how do I tell "him" to scroll on his own?m using this code:
scrolling = function () {
var scrollHeight:Number = scrollTrack._height;
var contentHeight:Number = contentMain._height;
[code].....
I've downloaded and slightly modified the Photo Gallery with Thumbnails .fla file. It works fine, except when you mouse over the right side, it keeps scrolling until all of the thumbnails are off the screen. Going to the left, it works fine, stopping when you reach the first thumbnail. On the original, it works as it should.
View 1 RepliesDoes anyone out there have code for an XML gallery that arranges the sliding thumbs in a grid of many rows and columns instead of a single row?
View 6 RepliesI've got a problem. I have to make gallery like [URL]
View 1 RepliesI have build a gallery but its very simple. It takes images from xml file. I have attached all files in zip. First when I press next button it goes to next image but with no effect. It just displays next image. I want to incorporate a sliding effect when the image is changed to another. And second I want to use autoplay feature. As soon as swf starts the images came one by one with difference of few seconds.
Attachments: slideshow.zip (752.0 K)
I have a sliding photo galley with a previous and next button. I have added action script to tell the linked pictures to slide along and for the next button its fine (I took the script from a forum...as you do). I put stop commands on the key frames over the next picture, Now if I am on the 4th image and click previous, its goes all the way back to the start!
stop()
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
}} next_btn.onPress = function(){
rewind = false;
play();
} prev_btn.onPress = function(){
rewind = true;
}
I'm looking to do a sliding image menu like this one: [URL]. I can do this using tweening but it is not as smooth as using actionscript. Does anyone know what the name of this is as when I do a search as I can't find any solutions? I've tried 'thumbnail expand' and 'image easing' but am not getting any hits.
View 2 RepliesI'm trying to make a site with a photogallery that has sliding thumbs in the bottom corner ("slidingOut_mc"). I've got them sliding from right to left with a simple tween that is infinite. The problem is that I have a left arrow and right arrow that I want to slide the thumbs in reverse (left arrow i.e. "back_btn") or at double speed (right arrow i.e. "forward_btn") on a roll over of the button. I used the ENTER_FRAME thing to get the mc to reverse with prevFrame when rolling over the "back_btn" but I can't get it to stop when I roll out.
This is what I have so far...
back_btn.addEventListener(MouseEvent.ROLL_OVER, backF);
function backF(event:MouseEvent):void{
slidingOut_mc.addEventListener(Event.ENTER_FRAME, everyFrame);
function everyFrame(event:Event):void{
slidingOut_mc.prevFrame();
[Code] .....
It tells me the "everyFrame" is an undefined property. I think and hope the problem should be obvious to those who know more than me. Do I need some sort of import at the very start of it all?
I have a sliding thumbnail gallery which when a thumbnail is clicked loads an external .png into a container with an instance name of mycontainer which I have on the stage in the .fla. Its added like such:
When the Loader's (which I gave an instance name of imgLoader) complete event is called the function onLoaded loads it -like this: mycontainer.addChild(imgLoader);
I also added a mask(stageMask2) to mycontainer which is the same size as the external .png--I then used this code imgLoader.mask=stageMask2; to mask the .png. I did this because I added a zoommc function which enlarges the imgLoader and wanted to keep the visible size of the container the same. I would also like to be able to drag the zoomed image. I don't want to drag mycontainer as it contains the mask and I cant drag the imgLoader as it doesn't have that property--Do I need to put the imgLoader in another container?
Here's the problematic code:
var stageMask2:Sprite = new Sprite();
stageMask2.graphics.beginFill(0x183045,0);
stageMask2.graphics.drawRect(swfX,swfY,604,403);
stageMask2.graphics.endFill();
var closeWin:TextField=new TextField();
[Code] .....
I want to make a sliding gallery that plays a certain amount of frames and stops. I have this script
[Code]....
Instead of play() i have tried putting a counter in like counter 8 but it does not work.
The idea is that if i click the contact button but im on the home page its scrolls over all
other pages and stops on the home page.
I just pulled together a picture gallery, where the pictures simply scroll across the screen using arrows. I used the template from [URL] The problem is that when I added my own pictures, the graphic symbol was obviously a different size from the original template. So when the images scroll they should stop at a certain point as to not show any empty space. I changed the values that i guessed were the ones setting up where the graphic has to stop at, but it doesnt seem to be doing anything. The code below is the only script of any importance, at least that I know of. The other stuff just points to targets and gotoandplay stuff.
View 3 RepliesScene: 450 px width. and the boxes (instance name:dot) are 50 px each.
The AS on the timeline:
// IMAGE
PHP Code:
gridx = 60; gridy = 60;
num = 0; mcArray = [];
dot._visible = 0;
for (var i = 0; i<21; i++) {
for (var j = 0; j<1; j++) {
var mc = dot.duplicateMovieClip("dot"+num, num);
[Code] .....
And when It start to slide after a little time the images start to stack on top of each other. How can I solve this ?
I am trying to develop a dynamic image sliding component.Although i tried to implement v2 framework but finds it difficult to handle.yet what i have created is attached.Please guys test it and give me few thoughts about it. This is the forum i like most and i learnt lot from it and thats where i wanna load my first independent work.
View 1 Replies1. He wants the image slider device to scroll from left to right, instead of the default right to left.2. He wants to make it so that when you click on one of the photos (which are all buttons) the scrolling stops, and when you click "close" the scrolling starts again.Here is the actionscript for the sliding mechanism:
_quality = "BEST";
moview = 770;
w = slider._width;
[code].....
i was looking for gallery looking like this site [URL] i was looking gallery first page title gallery then Big image like this with description.
View 1 Repliesi am trying to add extra images to the photo gallery attached. I would have thought it is easy and it seems so. I add an extra image to the gallery. I publish it. The html file shows the extra image in the gallery but the swf doesnt. driving me crazy, cant work it out?
View 14 RepliesI've made a gallery slideshow before but wasn't as intuitive looking back at it now and I want to start fresh on this new project. I would like to convert a jQuery lightbox style gallery into a flash XML based AS3 image gallery with categories. I don't want to code the FLA, I want separate AS files.
This is a school project for my website. I would use jQuery and I have more experience with it but this project needs a flash component. I'm just not sure where to start and looking for some advice on how and where I could find resources. I want it to be minimal as I can make it;
- 8 thumbnails to a "page/section" with more flowed into page 2 or 3 etc. (or a srcoller)
- a few buttons for categories
- images fading in full size with a description when hovered over and a close button
- preloader (simple bar)
Esentially something like this > http:[url].........works which is using http:[url].... for the thumbnails. That might be ambitious but I'd suffice with a simple fade effect.I've downloaded some galleries out there but most of the code is messy or outdated.http:[url]... this is alright, but all the code is done in the FLA. I might break it into AS files but it depends.
I'm working on a sliding featured gallery like [URL] or [URL] uses on their home pages. What I have so far is here: [URL] Where I am running into trouble is in the loop around/wrap around areas. My next and previous buttons tween to the next/previous item just fine. However when I get to the last/first, it gets tricky. What I have done when you get to feature #5 is check for the x position, and if I am going beyond 5, I reset it so that we pull in #1 instead. The problem is that this scrolls in #1 from the wrong direction. (Take a look at the SWF above to see what I mean).
If I shoot further back in negative X direction and scroll that way, I'll end up with blank space at the start of the move. I could dupe #5 and put it there, but then I have two versions of feature #5 (and #1 for the wrap the other way) that have to be maintained. (Note these will be more than just a blank square obviously, they will each be movie clips that do things). Possibly that is the correct way? Or am I going about this the wrong way. Would it make more sense to dynamically create, scroll and remove the clips on each button click? (I'm not sure how I would do that exactly)
[Code]...
Just trying to make a flash photo gallery that displays all the image files in a certain directory with the usual photo gallery functionality.
View 1 RepliesI have a gallery where passing over the image a rectangle drops down showing the caption for the image. The informations are read from an XML file and some of my images don't have a caption, for those emails I want to avoid the tween.
[Code]...
I'm trying to find out how to make a simple image gallery which changes image upon a mouse click on a button, when a button is pressed I want the image to slide in from the left into the viewable area and then when another image is selected I want the previous image that was viewed to remain in the screen and then the new image slide across over the top to replace the image.
I can get the images to slide across from the left upon a mouse click however I can't change the layer order so if image 6 is viewed and then I click to see image 1, the image will slide into place however it will be below image 6 so therefore not viewable.
I don't have an example of what I'm after but I hope my explanation was good enough, I've seen this been done in javascript but I have to use flash and am unable to replicate the effect I'm after