ActionScript 2.0 :: Stopping Vibration Effect?
Nov 14, 2004
I am working on a file that emerges with a vibration / random alpha effect, but I don't want the effect to last forever... I want it to stop.Here's my code, which is placed on the first keyframe (actions) in the timeline:
var vibration = 0;
var xShift = random(vibration * 2+1) - vibration;
var yShift = random(vibration * 2+1) +- vibration;[code].......
After a few moments, I want it to come into focus (end of timeline has a normal image, in focus).
View 3 Replies
Similar Posts:
Apr 6, 2004
i have text which i have created to vibrate using this code
onClipEvent (load) {
// movie width/height
height = 150;
[code].....
View 2 Replies
Aug 16, 2003
how to let the vibration occur for a finite timeframe. i.e. how do i make it stop?
View 3 Replies
Apr 6, 2004
I have text which I have created to vibrate using this code
onClipEvent (load) {
// movie width/height
height = 150;
width = 500;
this._xscale = this._yscale=temp;
[Code] ....
How to get vibration becomes more violent over time?
View 2 Replies
Nov 21, 2005
I am following the code from a site in which a text has light rays effect. But it the light ray effect is continuing even after the end of the movie. stopping the light ray effect of the text. The code for the light ray effect is as follows: i = "1";
[Code]...
View 1 Replies
Oct 11, 2010
I am using the downloaded snow effect from the following link. [URL]. I want to add a link to the movie. I use this:
Code:
var link:URLRequest = new URLRequest ([URL]);
button_mc.addEventListener(MouseEvent.CLICK, gooo);
function gooo(event:MouseEvent):void {
navigateToURL(link);
}
But it stops the snow - and I'm not sure that the links work either.
View 3 Replies
May 3, 2009
Secondly here is my NEW problem.... I have some buttons on my page that fade as you roll over them, and they were working fine, UNTILL i changed my Publishing Settings>Flash >JPEG settings.. from 80 % to 100%. But even if i changed it to 81% it still messes up the fade. When i say messes up i mean the fade stops fading, and it just snaps from the pic to black.
View 7 Replies
Feb 23, 2007
This code does what I want except for all the vibrating once the mc has stopped bouncing. I guess it's still bouncing. I threw in a 'delete.onEnterFrame' if _y==floor, but that doesn't give me the desired results. I want it to bounce for a bit then come to a rest with no vibration. I'd upload a basic .fla, but I'm restricted from uploads at work. All you need to do is create a 100x300 .fla, make a mc with the instance name of box_mc, place it at 10y, 25x and paste the code into the actions panel.
[Code]...
View 5 Replies
Apr 16, 2008
I'm in the process of creating an earthquake that takes place in an office setting. This will require the entire room to rumble. I found the following script that makes things rumble fairly well when I slap it on a movie clip:
Code:
onClipEvent (load) {
//movie width/height
[code]....
View 5 Replies
Nov 21, 2006
i have a snow effect in a movie with the code below. i want to stop the effect midway through the movie without stopping the movie. how do i use a stop command to do this?
init = function () {
width = 550;
// pixels
[Code]....
View 2 Replies
Feb 18, 2009
I want it to while still easing into place like the iphone does. For example my stage is 550px. The drag and throw MC is 1650. That's 550x3. If the first image is showing starting at x axis 0 and you drag to the left it will ease into place stopping and showing the second image stopping the image at x axis 0. And the same thing scrolling to the next one and scrolling back. So the code is below and I've attached the movie that I'm working on.
[Code]....
View 8 Replies
Dec 25, 2011
flash pro. as 3.0.animation . almost no codes except ends of scenes having :
import flash.media.SoundMixer;
if(SoundMixer.areSoundsInaccessible() == false)
{
SoundMixer.stopAll();
}
[Code]...
i got this scene, with this specific bgm , individual frame layer. and the sounds at another layer. what i want is to stop the sound without stopping the bgm . (yes, i know the above code wouldn't work as it stops all sounds)
View 1 Replies
Jan 7, 2012
I am making a character walk. This code will make him wobble to the right and when thats done it will trigger him to wobble to the left and then call the function again to continue the loop.I can get the loop to work fine by calling the function but how do I STOP the function? Also I want to call it later on. Is there a way to start and stop a function?
function wobble()
{
var ws = .1;
var dis = 1;
[code]....
View 2 Replies
Jun 14, 2005
check out: [URL] The typewriter effect here is very fast, much faster than when I use onenterframe to produce the effect. Does anyone know how this is done?
View 14 Replies
Jun 16, 2003
I really like the text effect Pom used in the footer contest, and would like to use the same grid-type method of creating mc letters but with a different effect. i understand how to change the parameters and shapes of the letters, but can't seem to figure out which piece of code is purely for the explosion effect. basically, i want the letters but with the 'Repel' effect from[URL] here is Pom's AS:
[AS]
cellSize=3;
radius=10;
damp=.85;
[code]....
and here is the .fla using the repel effect using pre-made mc:
View 6 Replies
Feb 8, 2011
It's a bit of decoration to go behind a logo. When the dMove var is commented out I get the appropriate line of squares fading in and out at random spots along the x = 78 axis, but when introduced nothing appears at all...
[Code]....
View 2 Replies
Aug 25, 2010
is there a way to change the code and create attraction effect instead of push effect?i tried but without success...!
View 1 Replies
Feb 7, 2006
in a nut shell I have found this wicked piece of open source actionscript.
It responds to the cursor and was wondering if it is posible to modify the x_position and y_position actions and make the action respond to a moving object???? (a movieclip with a variable name)
is this to complicated to attempt or is it doable??
ACTIONSCRIPT
Code:
//
var rows, colm:Number;
//
[Code]....
View 2 Replies
Jan 29, 2004
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 Replies
Oct 22, 2009
Several months ago I created this, The Halo Galactic Map. After talking with a lot of people on their opinions and such, I wanted to take it to the next level and replicate the map found in Mass Effect and Mass Effect 2 shown here.
Based on my knowledge of Photoshop and some... and by some I mean very VERY little Flash... I took it upon myself and another member of the community to create this.
All was going well until the member decided it wasn't his cup of tea. Basically, he didn't like that he couldn't do it well enough.
Ok, so I've installed Flash and tooled around with it for a bit, but I want to get going. I know this isn't the best place to post this thread - I know there are probably better places - but I just wanted to know where and what to begin with. I have the whole thing planned out in levels, layers, and motion...
View 0 Replies
May 10, 2009
Basicly its simply a world map with a character in the middle. You move around with the arrow keyes (in reality you move the map around and the character stays in the middle) and at certain impact you walk into houses etc etc. To accomplish this i have a movie clip in the middle named "man" and a map movie clip beneath it with the following code:
[Code]...
So far so good and no problems. This is what i need help with: I can't seem to get the "main" map to stop moving at certain points when it impacts the "man". In essence there are lakes and mountains that the character cannot cross when when he hits these i want the speed X to be 0 so to say. Im uploading my example here. It's when the movieclip in the root named "man" hits the purple line in the map movieclip its speed should go 0. Ive tried around with hittests (the code is still in the code) but i can't get it to work.
View 21 Replies
May 23, 2009
I'm using Adobe Flash CS4 on Mac (windows i'm sure i can figure out how to fix it on the mac version)I'm trying to sync some animation to sound, and my sound is all in one big file. I'm wanting to go through frame by frame and tweak it (Yes, it's a frame by frame animation, no tweening here don't ask why, it's just not), anyways, I keep trying to use the "Control -> Play" button to keep playing the sound from the area I'm working on so I don't have to start at the beginning everytime. After I hear the section I want, I want to just push "stop" and everything stop, including the audio. It would stop everything before, but now it's not stopping the audio so it will just keep playing even though I had hit stop.?
View 1 Replies
Dec 28, 2009
I have a simple flash movie that contains multiple frames which make up the sections of a simple site. I have built the navigation so that when you click a button, the movie advances to the proper frame/section. So far so good.My problem is that when I get to the FAQ section of the site, the movie clip that makes up the faq answers plays to the second frame, not the first. The first frame of the movie clip has a stop action in the actionscript, as does the second. But no matter what I do, any time it loads, it quickly plays to Frame 2. I do have buttons that play different frames of this movie clip, but they are attached to mouse over events and nothing else.
View 2 Replies
Jun 4, 2010
I'm making a basic flash website, and have already created the site structure, but I'm having trouble adding FLV and SWF, as they aren't responding as I would like.
1) I have built a basic flash photo gallery, and it works great. I have exported the SWF, but when I add that to my main sites keyframe, it plays non stop, and the buttons on that embedded SWF don't work.
2) After adding a FLV video to a keyframe, it works as I would like. Except that when I click to another keyframe after starting the video, it keeps playing. How would I be able to pause/stop the video if a navigation button to other keyframes are clicked.
View 1 Replies
May 26, 2009
I have FLV files that continue playing when I leave the frame that they are on. I can stop the playing FLV by putting this code on the following frame:
if (demo.playing) { demo.stop();}
Where .demo is the name of the instance of the .flv component.
Here is the problem - I have many frames with many flvs, and when I tell flash to stop multiple FLVs, for instance:
if (demo.playing) { demo.stop();}
if (demo2.playing) { demo2.stop();}
I get this error: TypeError: Error #1009: Cannot access a property or method of a null object reference
As far as I know, flash is telling me that since the instance of "demo2" has not started playing yet (ex. the user only went to the page with the "demo" flv, but not the "demo2" flv yet) that flash has no idea what demo2 is yet. I thought using a conditional statement would remedy this, but I suppose the .swf can't stop playing something it does not yet know exists.
Is there any way I can introduce all of the flv's at the beginning of the file, yet not have them play and not have flash "forget" about them so that I can stop them using the code above? Or is there a way to have the conditional statement not error in the event that the referenced instance has not yet been "introduced"?
I really wish they would have added an "exit frame" command in AS 3.0...
View 1 Replies
Aug 5, 2009
I can't seem to get around my video and audio files starting when I arrive at the page. I'm even using some example code with start and stop buttons. This is in CS4 Flash. I expect it's because the ActionScript is in the wrong place because when I run the movie it flashes through all of the pages on the site without stopping at the home page. Is there some generic code that will allow me to simply swap out the name of the video or audio file I want to start. If there is, do I need to locate it on its own layer at the top of the timeline?
View 6 Replies
Nov 5, 2009
I've encoded an flv with cuepoints. When I play the video, it freezes at the cuepoint. I'm useing as3 on windows 7. I've removed the metaData callback from the code below as the problem occurs with and without the callback.
nc = new NetConnection();nc.connect (null);ns = new NetStream(nc);
vid = new Video();vid.attachNetStream(ns);ns.play('names1680.flv');
View 1 Replies
Mar 26, 2010
I'm building a portfolio website and I'm using URLloaders to load new content.I want the user to be able to change the content they're loading before it completes. aka, stop the current load and load something else.
Adobe Actionscript 3.0 reference says I can use the following:"Use the unload() method to remove movies or images loaded with this method, or to cancel a load operation that is in progress."
Here's what I have (my attempt to stop the loader is in bold):
button_btn.addEventListener(MouseEvent.CLICK, newPage);
function newPage(e:MouseEvent):void { loaderState=true; newDescription();
if (loading){
[code]....
I'm getting the following error on loader.unload(req); : "1137: Incorrect number of arguments. Expected no more than 0."I've also tried just using loader.unload(); but it doesn't work - the url loader just continues to load and doesn't load the new content.
View 5 Replies
Apr 21, 2010
I am trying to get music to play continuously, it works, but everytime you click on a button, the song restarts on the new frame.The sound code is on frame 1, and is loaded from and external file.[code]...
View 17 Replies
May 21, 2010
I need to stop an flv movie when I click a button that is not on the control bar. e.g. I have three pages in flash and when I navigate from the videos page after starting the playback of the movie, the audio from the movie continues to play. I have no idea why this is.
View 5 Replies
