I've been playing with the Kirupa gravity tutorial here: Url...At the end of the motion I want to jump to a new movieclip and remove this one.[code]Does anyone have any suggestions for detecting the end of the bounce and jumping to the new movieclip? [code]
View 2 Replies"How do I get the motion editor to show easing controls"?
I've just made my first flash movie in flash cs4 and I wanted to add easing to the (classic) tweens I created. I tried selecting the first graphic, then I tried selecting the (classic) tween span, but each time I go into the motion editor it just says "To edit properties, select a tween span in the timeline or a tweened object in the document".
I am new to flash and working on creating a simple animation. I have the objects ready, but problem is I can't seem to get motion tween working. Following this, I tried a very basic motion tween just increasing the size of text from one frame to another and can't get even this to work. I followed the basic steps, converted the text objects to symbol etcetera. What is seen is for frames 1-9 there is no change and in frame 10 there is sudden change in size. I also notice that there is no 'arrow' observed in the tween as shown in a sample tutorial.
View 10 RepliesI have created a motion tween in Flash and want to slow the speed of the tween towards the end, so my image doesnt stop suddenly. I applied a slow ease which was working previously but has now decided to stop working and I cannot get it to work again. The strange thing is when I change the ease value from 100 to -100, so the ease is applied to the start of the motion, that works fine, but when I change it back to 100 the ease wont apply to the end of the motion
View 3 RepliesI just can't figure out why a simple movieclip is not performing as expected.
Here's what happened:
In my MAIN SCREEN, I placed a a movieclip and named it "mainnav_mc" and on my ACTIONS layer, I placed a script on the frame that will eventually play the movie "mainnav_mc". This is the script: mainnav_mc.gotoAndPlay("show");The clip is suppose to fade-in but it seems that MOTION TWEEN is not working. I tried to create a test MC and still it's not working.
I did the random motion tutorial (mx version) on kirupa, and it isn't working the way I expected. I made a new movie clip that consists of a simple white dot, and put did everything else. When I start the movie the white dots jump around rather than moving smoothly.
View 3 RepliesI have a basic alpha motion fade which works using my flashplayer but not in flash players less than version 10 (no fade is present its just instantly there). If I change the player I am developing for in my movie settings the fade just does not work.
View 1 RepliesThough I find that chapter interesting and that I might have a legitimate use for it, it is a bit skimpy with details. I need to COPY MOTION TWEEN AS ACTIONSCRIPT on three different tweens (three different layers), but the tweens need to be perfectly synchronized.
View 4 RepliesI have a situtation trying to get a motion tween to work. It woeks in the time framw when I hit play but when I go to test it does not work.
View 7 RepliesFor some reason I cannot Create Motion Tweens. I have followed step by step instructions, and using exercise files from Lynda. The symbol from the Lynda files is a movie clip, and I resize it according to the demo - step by step. Selecting "Create Motion Tweens" from the menu does not actually create motion tweens. I have also tried from scratch in new files. I am using CS4 on Windows 7, and I have created motion tweens before. I must have made some change somewhere else in Flash to cause this to stop working.
View 3 RepliesIf I perform a motion tween along a curved path, Flash CS4 does not allow to change the curves to "corner point" or "linear" in the motion editor. URL...
View 2 RepliesI have been searching far and wide for a solution on how to offer slow motion and fast motion options for users that upload video to my webstie. There is an implementation on Google Video that has exactly what I am looking for: the option to speed up or slow down the video and continue to play the audio. The screenshot is below. I know that Flowplayer has an option to slow down or speed up video when implemented with Wowza server. However, when using that approach, there is no sound.
I have also seen the option from Enounce called MySpeed that allows video to be slowed or quickened, but this requires a browser plugin which is too much of a barrier for our users. How does Google do it? How can you add an option to a flash player to slow down or speed up video?Here is a screen shot. You can see the option to change the speed of the video to 1.5x. It also has options to go to 0.5x, 1.25x, 1.5x, 1.75x, 2.0x, 2.5x, and 3.0x.
I would like to create a polygon that changes its shape (circle, trapezium, square, rectangle, triangle) based on specific buttons that the user clicks? An existing shape has to be able to morph into all the others. For instance, the trapezium has to morph to a square, circle, rectangle or triangle.
If I were to create each transition manually, I would end up with 5x4=20 scenes. Is there a way that I can just assign each shape to its own frame, and deploy actionscript to set in motion the transitions from one frame to the 4 other possible frames? I am very grateful to anyone to just point me in the right direction,
How do I add motion blur to a motion tween?
View 2 Repliesim writing AS3 under linux and as such do not have access to ANY of the fl.* packages, including tweens, motions, special animations and components. I can only use Math.* and XY Grid Coordinates to calculate motion manually.
I can make movement of sprites fairly easily on a coordinate system, but this restricts how the path can go. Usualy only an up,down,left,right movements for the simplest math. I suppose this could be expanded to move in more varied directions but its not quite what im looking for.
I would like to be able to draw an invisible line that a shape can follow. Then it can have curves or bends in it without problem. I want to then start the sprite at the 1st pixel of the line and set its next coorinate based on where the line is at, but at 10px down it (and so on) till it reaches the end of the line. Is it possible because I cant think of a way? Are there any other good PureAs3 motion tutorials around?
I'm getting the following error: Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol. I don't have any ungrouped shapes (it's all text), each layer has 5 instances of only one symbol (keyframes), no objects are grouped and text is all static text.
When watching the animation, the first word (web) looks fine, on the second word (design) the tween fails on the last couple of frames of that clip (the blur filter disappears), the third word (and) is OK, and on the forth word (development) the blur filter is not applied to the last 16 frames of that clip.I broke each animation into its own MC thinking that was causing the issue, but that didn't fix anything.
package
{
import flash.display.DisplayObject;[code]....
I have a flash project, its working fine in local system, but the same file is not working in live here is the link of the site, its showing blank page, the flash contents are not loading... [URL]
View 12 RepliesI have a flash project, its working fine in local system and checked this file with uploading in someother websites, its working fine there too, but the same file is not working in live here is the link of the site, its showing blank page, the flash contents are not loading.URL...and here the same file which i have uploaded it in other server its working fine.URL...
View 2 RepliesI missing a file that needs to reside on the server to get this working?
View 1 Replies[URL]
The ad on the bottom right of the screen (the one with lightning flashing) has an invisible button in its Flash file (CS5) linking to [URL]. This file is imported as SWF in Dreamweaver CS5.
The hyperlink works in Firefox, but not in Safari. Maybe it is just my computer.
I have developed a player in AS3. It is working if i provide the IP of the website. But, it is not working when i provide the full domain name. Even, i provide the crossdomain.xml for global access.
View 1 Repliesi have a "swf" file which is picking url from xml & displaying the image, when i tested it locally it works fine, which means it picks up URL from XML & displaying corresponding image. After i uploaded it on server, it doesn't show anything.
View 2 RepliesI had a button when clicked, it would replace a different moviclip.This worked until I made the bulk of the code into a function and moved it to the layer, and then tried to call the function from the previously mentioned button. It generates no errors, but it stopped working.Hierarchy:Layer 1 > U1 > image
Original button script:
on (release) { var theDepth:Number = _parent.U1.image.getDepth(); _parent.U1.attachMovie("K3E", "image", theDepth);
[code].....
I am creating a website that has links to flash animations. i have created a folder called flash in the root folder and copied the relevant .fla, .swf and the .mp3 files into that folder. the animations are working fine but the audio isnt.it all works fine in flash itself.
View 4 RepliesI created a 9-scalled background in Flash CS5 which is working fine in Flash CS5.But when i imported it as embeded graphic in Flex, and change dimensions in runtime, 9-scalling doesnt work.Here is my code.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"[code]....
am using bitmapdata to make me a nice lil' background image, and it works great...until it's resized. Whats happening is it's creating a new bgHolder clip on the resize, NOT resizing the current empty clip "bgHolder"Here's the code(taken from various posts)
import flash.display.BitmapData;
#include "mc_tween2.as"
Stage.align = "TL";
[code]....
I have just made a website (URL...), and I have two swf. One sound swf and one video swf but none are loading in IE? Anyone know what wrong?
View 1 RepliesI recently migrated from CS3 to CS4, and have a question about the "Motion Editor". In principle it sounds fantastic, but I can never get it to work on any of my fla files. The tab is there, but when I select a tween span in any of my files, the Motion Editor continues to say "to edit properties, select a tween span in the timeline or a tweened object in the document." Nothing I do can get the Motion Editor to show anything but this.
Is this because the Motion Editor works only on tweens in new fla files created in CS4? (My existing files were all created in CS3.) Very frustrating, as I would like to use this new feature. I tried to get it to work in a new CS4 file, creating a tween and going to the Motion Editor tab, but.
How can i do it? to keep a gif picture when a play a movie moving... because when i put gif in the stage it doesn't and when i test it. it doesn't move
View 13 Replies