I'm trying to add an event listener to my flash file using actionscript 2.0. what i'm tryin to do is this.
[Code]...
so whenever the user put the mouse over the stage the timeline should stop playing and onRollOut the timeline should continue.
Line 1 Frame 1:
[Code]...
I am trying to trace the results of my listener when the browser is resized...no avail. Are you able to see what I am doing wrong?
I want to add a key listener to my stage, but from an object 2 depths below the stage. How would I do this?
I thought about adding the listener from my doc class, but the listener function is in the object that is two depths below the stage, which would mean I would have to pass the key values to the next movie clip, then when that one is loaded, pass it to the one with the listener function. It seems very complicated, is there an easier way which keeps with the principle of OOP?
I have a document class called "RheDocClass.as". This document class instantiates a class called "LiquidGui.as".What I want to do is have the LiquidGui class listen for stage RESIZE events and the act on those events. But when I try to add a stage listener to the LiquidGui constructor I get errors. ( the error depends on how I experiment with the syntax) So I have put the listener in the RheDocClass instead, and then pass the stage properties to the LiquidGui class. But, I'd really like to keep the stage resizing code all in the LiquidGui class so that I can reuse it with other projects.how I can attach a listener to the stage from the LiquidGui class?
View 9 RepliesI have a Enter_Frame listener to blend in a clip. The event is still running when my clip isn't on timeline anymore. How do I check that or how would I remove the Listener the best way?
View 2 RepliesI need to add an event listener to the stage of this code.. this is for a scrolling slider.. and if your mouse is not over the scroll bar area when you release.. the slider gets "stuck" to the cursor and it won't release. I believe I need to add a listener to the stage for the mouse up state so that if your cursor is elsewhere on the stage and you release the mouse, it will release the slider.[code]...
View 2 RepliesI have created a listener for stage in a function. The same function is called by another function.
Now I need to check with a condition that whether the stage listener is present or not.
HTML Code:
stage.addEventListener(MouseEvent.MOUSE_UP,stpdrg) if u r not clear with the question.
I have been playing with OOP concept... is it possible to add stage event listener from a custom class... I tried to access, stage.addEventListener(MouseEvent.Mouse_Move, mouseHL); in the constructor.. It shows error!
View 1 RepliesI have added a listener to the stage to close a loader object when the stage is clicked. The problem is the click seems to effect the loader object to (basically when you click the loader it calls the click function attached to the stage). Is that to be expected? I suppose it makes sense, but is there a way of adding a listener to the stage that excludes certain objects?
View 3 RepliesCan I add a ProgressEvent listener to the stage? I don't see it in any of the auto-complete options when I am typing in Flex. What do people normally do to get a progress readout of the entire main runner's loading progress? I try the following, which is where I would expect to see the ProgressEvent options pop up:
stage.addEventListener(
Why KeyboardEvent listener (AS3) does not react until I add it to the stage and not when I simply write it down in the Document Class just like I do with any other function? I mean, I have to write[code]...
View 1 RepliesI have a class listening for key presses attached to the stage, works fine until...a menu item that when clicked removes the menu from the display list. This seems to cause the stage to lose focus & I need to click the mouse on the SWF to get the keys to register again.
View 4 Repliesexactly how do I add boundaries or some kind of listener to my stage? The size is:
x = 900
y = 900
im looking to end my game if the player moves beyond the screen area.
in my class I am trying to add a MOUSE_UP event listener to the stage.How can I do this?
PHP Code:
//when I do this in the main constructor of my class
Stage.addEventListener(MouseEvent.MOUSE_UP, h_draggable_mouseUp);
[code]....
I am using a component in my application, but it turns out, it's slowing my app down big time b/c it doesnt remove an eventListener on stage for mouse move. Is there a way I can remove this listener? I can't get into the class b/c it's a component and it doesnt have any sort of kill function to call.
View 15 RepliesIs there any way in AS2 to add an event listener NOT to a particular button instance in the stage, but to any symbol in the stage which is a Button?[code]...
View 5 RepliesI am creating animation using as3 in which i duplicate the circle ten time,then pushing into an array and giving random motion. When all the duplicate object goes outside the stage then i should remove the event listener. But right now when one duplicate object goes off the stage the event listener is removed.
View 5 Replieshow do I call the re-size action at the first frame? It works great once you resize, but isn't called at the beginning. I've tried a few things, but I'm shooting in the dark at this point.
Code:
sizeListener = new Object();
sizeListener.onResize = function() {
if((Stage.width > 1920) || (Stage.height >1200)){
[Code]....
I'll get into AS3.0 once I have time, don't want to rewrite a bunch of sites right now for something so small!
I have a drop-down menu that stays open when I click it, until I click it again. I want it to close when I click away from it. So I created an event listener of type MouseEvent.CLICK and apply it to the stage.
The obvious problem is, though, that when I click the drop-down menu to make it open, I'm also clicking the stage, which prevents it from opening.
I think there's probably a simple solution to this but I'm stuck. I called stopPropagation() on the drop-down menu and that seems like it should help but it doesn't.
I have created a listener for stage in a function. The same function is called by another function. Now I need to check with a condition that whether the stage listener is present or not.
[Code]...
im trying to create a separate class so i can create a custom mouse. But i need to make it so that every time the mouse moves then something happens. as in it dissapers and after 5 seconds the timer resets. I have the code and it works in my .fla file, but im not sure its possible to put it in a class file and have it be the class of the .fla.
View 16 RepliesI am having problems with a flash project I am working on (flash cs5.5, as3).I have a movie clip with some animation in it, and when it reaches a certain point, I want it to call out a function that is on the first key frame on the stage (as in on the main timeline and not in a movie clip...).This is what I have so far in side that movie clip:
Actionscript Code:
stop();addEventListener(Event.ENTER_FRAME, onTween);
but I allways get this error message:
"Symbol 'ContMask', Layer 'Layer 6', Frame 124, Line 21120: Access of undefined property onTween."
All I am trying to make it do is to trigger the function (onTween) in the main timeline from the movie clip (ContMask).
Hello I need to remove a ENETR.Frame listener to a frame on stage from a symbol.
View 13 RepliesI have made index swf which is loading other child swf's into index these swf's are images.swf,portfolio.swf, about.swf etc.., I have made 2 public function in each swf which is construct or diconstruct. when i unload any swf then i play disconstruct public function of every child swf.. I stuck in when I remove stage event listener of every child swf then it shows error.
[Code]...
I wanted to remove an event listener from main class stage, but i get the error 1120: Access of undefined property stage. How do I actually access the stage?
custom class:
import main;
main.disableVcam();
main class:
public static function disableVcam():void {
trace("disable");
stage.removeEventListener(MouseEvent.MOUSE_MOVE, movevC);
}
I have two scenes in flash - when you go to scene 2 there is a eventListener attached to the stage to move a movieclip. When I test the movie the only way the keyboard listener seems to work is if I click on the stage first, then the object will move. Is there a solution to this. The code I am using is:
[Code]...
What is the correct event listener to detect a child added to the stage? I tried:
[Code]...
which doesn't work. I also tried ADDED_TO_STAGE but that doesn't fire it either. Do you know the correct way to detect when the child is added? Perhaps I should be attaching the listener to the parent instead?
this is the error I am having:
TypeError: Error #2007: Parameter listener must be non-null.at flash.events::EventDispatcher/removeEventListener()
at project1_fla::MainTimeline/btnName()
here is my code:
ActionScript Code:
import caurina.transitions.Tweener;
import caurina.transitions.properties.ColorShortcuts;[code]..........
if i have a movie clip with an even listener attached to it, is the event listener being removed automatically when the movie clip is removed from the stage or should i always remove the event listeners manually?
View 4 RepliesI am having a weird problem with scope/reference. I am using a loop to preload a number of thumbs in one go, I am creating a different listener for each one on the fly and then passing event handlers for each one of them. This should not be difficult using a loop, but somehow I cannot access the the parent object on my listener and therefore I can't do much with my thumbs after they are loaded.Here is the relevant segment of my code. myThumb_mc is a temporary variable that does not exist when the loop finishes, you can copy and paste this code to test it though. It should work to that extent. (you'll need an image1.jpg to be in the same directory)
Code:
var myThumb_mc = _root.createEmptyMovieClip("myThumb_mc", _root.getNextHighestDepth());
myThumb_mc.clipLoader = new MovieClipLoader();
myThumb_mc.clipLoader.loadClip("image1.jpg",myThumb_mc);[code].....
The code above works, but it does not look nice and it cannot be the right way of doing this. Long question short, how can I access the parent of a listener from a listener object? ._parent does not work.