How to dynamically attach a specific MC to each Button's states ?In order to be able to change them at run-time, I'd like to attach a MC on the button's <UP> state , another MC on the button's <OVER> state, and so on, with the possibility to change these MC later on. The button is, itself, encapsulated in another MC.
View 12 RepliesIn the project I am working on I am trying to get a button 'menu button' from the library to appear on rollover within a dynamically created thumbnail mc. So basically when you roll over any one of the thumbs a button appears that can be clicked. I have tried to directly attach the button and also tried to create an empty clip in side the thumb and then attach the button to this empty clip. With this second method I can trace the empty clip though still can't get the button to attach.
Code:
currentThumbs.onRollOver = function() {
v = this.createEmptyMovieClip("ButtonContainer", 0); /// ButtonContainer can be traced
v.attachMovie("menu button", "downloadBut"+this.numb, this.getNextHighestDepth());
v["downloadBut"+this.numb].label_txt.text = "Download";
v["downloadBut"+this.numb]._x = 5;
v["downloadBut"+this.numb]._y = 5;
};
I know the 'menu button' works as it is used in other menus within the file though I can't get it to attach to the thumbs. So you know this.numb is working as well. It is created in another part of the code. I can upload the files if needed though it is a rather complex project including several xmls and loads of jpgs.
I have successfully loaded images into a movie on my _root using a text file array. I am trying to use that same method to load the image into a movie clip that I have on the Up state of my button.In the text file "imgLoader.txt", I have the code:
Code:
&arrJPG=IMG_0323**IMG_0324**IMG_0325&
In the AS layer, I have the code:
[code].....
I need to add a rollover effect to the disabled state of a Spark button. This way, users can rollover the button and know why the button is disabled.I think I would have to override ButtonBase's getCurrentSkinState. Is there anyway to test if a mouse cursor is over a disabled button?
View 1 RepliesI'm an advanced flash developer and action scripter with more than 4 years of experience.I need to have an explanation to this problem. I have created a vector shape mask on the timeline that does different shape tweens. There is a movieclip container that is under the mask. When i dynamically load a movieclip from the library into that masked container, it will disappear after the keyframe of the shape tweened mask is reached. Why is that so? Isn't that illogical? I attached a simple fla demo.
View 1 RepliesIm having 5 Mc's on stage : room1a to room5a.I want to add when the clip runs on the start, an onRollOver function to each MC's dynamicly , as i did here :
var i = 0;
for(i=1;i<6;i++){
_root['room'+i+'a'].onRollOver = function(){
trace("room" +i+ " was crossed over");
}
}
what i get on the trace is : room6 was crossed over . on each MC's i roll over with the mouse.
How do I attach data to a movie clip that is generated dynamically?
In my code below I create 3 green boxes. I want it to trace the sequence number of each box after it's clicked on, but I can't figure out how to make that happen.
Code:
for (var i:Number=0; i<3; i++) {
var nubox:MovieClip=new MovieClip();
nubox.graphics.beginFill(0x0FF000);
[Code].....
I am attaching six movies via the attachMovie method. I have put all six of these instances into an array and everything's going smoothly as all box's move around in random places and bounce around around a little. Only problem is I want to mask all 6 of these instances via setMask so they are restricted to one area but can't seem to figure out how to do that.If that's not possible I would also love to know if there is a way to do collision testing with them and then I could draw a border around the area I want them to stay in and have them bounce around that (I would actually prefer this)
View 1 Repliesbasically i am attaching a movie dynamically with the attachmovie method like so:
Code:
for(var y = 0; y < rowSize; y++) {
for(var x = 0; x < colSize; x++) {
attachMovie("box", "box" + count, count);
[code]....
now for each attachmovie they have a Event handler, rollover,rollout, but, on the release event holder I want it to load in some XML like so:
Code:
path.onRelease = path.onReleaseOutside = function(){
//alot of my nifty code that will be skipped for elongated post purposes
//but here is where im getting a error
[code]....
I thought at first having the XML declared in the loop does make it just loop through 15 times ( length of my nodes) and just display the last XML item, but when i declare it before it, it does NOTHING !!!!!!!!!! it doesnt even display a damn thing, soon as i put it within my loop it displayed atleast something?
I've been attempting to attach bitmaps from the library in AS3, and have settled on a piece of code which works:
PHP Code:
var myBitmap:Bitmap = new Bitmap(new pic1(0,0));
myMovieClip.addChild(myBitmap);
[code]......
taken from this link:
[Code]....
My problem: I am attaching variable number of MCs dynamically(not in the library), and i have to do so using flash6 or older. How can i use then loadMovie+onClipEvent handler to invoke something, if i am attaching MCs dynamically, and onClipEvent works only on MCs attached on the Stage(actions "on" those mcs, not "inside" them). Probably using classes. Any other option? and if not, can anybody guide me through assigning such class to such mc? EDIT: Ok, i also have done following:
[Code]....
and although the movieClip IS in library, and it DOES have MovieClip class assigned, onData event handler is NOT triggered and nothing is traced. Can the reason be "attachMovie" function?
EDIT2: aha. well, again it happened that attachMovie's methods are not yet initialized, so it was not yet "the proper time to assign" handler onData on those MCs. [only sen knows why ]. So that even trace(mc.stop()); at this point traces undefined, where it should trace [type Function], since stop is MovieClip's class method. Stupidstupidstupid.. relax...
I have a menu with five nav buttons (atcually MovieClips). Each has three frame labels: "on", "stay", and "off". The rollover and rollout animations play flawlessly, but I'm at a loss as to how to give each button a sticky "active" state. I'd like the button to stay in it's active state until another button is clicked, then I would like it to play it's "off" animation. Each MC has this code:
[Code]...
I am using Flash CS4. This needs to be done in flash because it is going to be used for a bannerDoes anyone know the code for dynamically pulling up the city and state?So if a user was viewing the banner from San Diego Ca... the dynamic box would say San Diego Ca
View 5 RepliesI am trying to dynamically pull up the city and state all within the swf file.
So if a user goes to my site from San Diego, CA. There would be a dynamic box that says San Diego, CA.
how to keep a Movieclip Btn 'Over State' to stay in the over position until another button is clicked?
View 1 RepliesI have a series of buttons inside an array. I am trying to get the buttons so that once they are pressed, they remain in the over state. Which is a darker color than the up state. So that people know which button they have pressed. Is there an easy way to do this for buttons?
View 1 RepliesI want to use Adobe mxml to create a swf. However, the mxml gets compiled to swf itself and is not available after creating the swf. I want to add states with UI components without compiling it every-time.
View 1 RepliesI have two buttons that are movie clips in Flash CS4 and when button 1 is on Over stage, I want the button 2 stop movie clip at the certain frame.
View 8 RepliesIs there a way of telling a MC button to have a hit state like a normal button? I have some text popping up away from my MC button that is included in the hit state. When I roll over the main button the text pops up. But also, when I roll over where the text pops up it also triggers the pop up animation.
View 2 RepliesI have encountered a new issue in my limited Actionscript 2 knowledge. I have a set of Radio Buttons, True and False and the user has to be alerted as to whether their choice is correct or wrong upon clicking any one of the two. Now, I have tried assigning an event handler to one radio button:
var true_rb:Object = new Object();
true_rb.click = function(eventObj:Object) {
//code to execute on click event
[Code].....
i need to add code to attached buttons
for(i=1; i<=6; i++) {
_root.attachMovie("niceButton", "niceButton"+i, this.getNextHighestDepth(), {_x: 50 * i, _y: 50});
[code].....
I have a problem with dragging movieclip which is dynamically generated via attaching movieclip from library.I want to move the movieclip by pressing the yellow square within a boundary say 100*4. I am attaching the flash file with this thread.
View 1 RepliesI'm trying to make buttons that involve a character pointing to indicate interaction.When a button is interacted with (mouse over or down) the character's arm points to that particular button. I separated his body, so that it remains constant on the main stage, no matter which button is being interacted with.The problem is, when the user is not mousing over or clicking down on any button, the character has no arms (since only his body remains constant)!How do I resolve this?The only thing I thought of so far is if there's any way to create an up button state that includes the arm (right now I have nothing for mouse up) THAT ENDS when the next button is interacted with. Is that possible? If I put the arm in the up state (in addition to mouse over and down) it stays when the interaction is over, which poses a problem when the user interacts with the next button (the character ends up with double the arms since each button introduces a different set of arms pointing towards that particular button).
View 1 Repliesi can in AS 1.0 attach a sound and play it on rollover fine...
Pretty much i have a button when you roll over it plays a sound thats it...very simple....i also know i can do it on the keyframes but i was hoping to do it dynamically as my site is completely created using AS barely no keyframes and i do not wish to start...
I have a sub menu with two movie clip buttons, let's call them mc1 and mc2. They both have a MOUSE_OVER event and a MOUSE_OUT event. What I would like is that when mc1 is clicked it will stay in the over state and then if mc2 is clicked mc1 will go back to the out state while mc2 stays in the over state.What seems to be happening in my code is that the MOUSE_OUT event is overriding the MOUSE_DOWN event. So when I take the mouse off after I've clicked mc1 the over state goes away.
Here's my code thus far:
import flash.events.MouseEvent;
import flash.display.*
addEventListener(MouseEvent.MOUSE_OVER, mc1_over);
[code]....
how to make a button stay in its down state when it's clicked, and then go back to its up state when another button is clicked? I'm using buttons, not movie clips.
View 4 RepliesI have a rectangular shaped button. When someone rolls over it, I want a text bubble to appear to the side of that button. The problem is, the mouse thinks it's over the button even if it's over the side bubble which does not exist in the "Up" state. How can I get the cursor to only detect a button ONLY if it's over any part of the "Up" state and not the "Over" state (which because of the side bubble is larger than the original "Up" state.)
Here is a screenshot of the two button states.[URL]... Even if the cursor rolls over the "Over" bubble (and not the Up state), the Over state still shows up.
I have an interface that uses buttons to play videos. I would like it if, after you press a button, it stays in the 'down' state until the next button is pressed.
View 1 RepliesI've done the complex rollover tute where the animation plays and rewind when the mouse rolls on and off the button.What I'm trying to do is get button 1 to stay in the down state or clicked state until button 2 is clicked. Once button 2 is clicked, button 1 will play its rewind =true function.I can get the button to go to the down state when I click on it but the rollout function is overwriting the on release function as soon as I roll of the image.
View 5 Repliesi realize this probably a fairly simple question and also that i should have used movieclips for my buttons but i got lazy and used buttons for some of them
is there an easy way to make my button stay "on" after its clicked? i need something fairly easy that i can then go apply to a bunch of buttons. obviously it need it to turn off once another button is clicked as well.