I have an mp3 exported for actionscript with the linkage name bgmusic.When I play the sound using a sound object, it works fine.However, I take that same .swf and load it into another movie and the thing breaks... the sound doesn't play.How do I fix the linkage so that it'll play again?
View 5 RepliesHow to import sound with AS? Cuz i have tried it and my sound just wount play. Can you explain me where my sound should be and what is the as code for importing cuz i use
mysound = new Sound();
mysound.attachSound("SoundOn");
mysound.start();
and this SoundON from where i get it, i try to add linkage to the sound file but in CS4 i cant find the option;. I do it from the library, adding text into the linkage field but still my sound doesn't want to play?
I have sound playing in my flash file. My index file is a html file which calls the flash file, and when i run the html file, the sound doesn't play. Does anyone know how I can rectify this?
View 5 RepliesI have a button that when clicked, it's supposed to play a sound. Now, the sound does play when it's clicked, but it seems to be offset (meaning, it starts a few seconds later in the sound). As a result, only half of the sound plays.I have two buttons that do this, and I'm not sure what caused them to do so.I've never had this problem before, so I'm clueless where to go to fix it. I tried verifying the integrity of the sound, and it's normal. When I check it's proporties from the library, and "Test" the sound, it plays just fine, with no offset or anything.Here is the code I have for the button that causes this behavior:
Code:
var soundEffect_Button = new SND_EFFECT();
soundEffect_Button_instance_manual.addEventListener(MouseEvent.MOUSE_DOWN,SndEffectDown);
//Make the callback[code].........
The main problem is that the FLV doesn't load/play, which most likely causes the secondary problems, such as the bufferClip always visible and no way to test the video and audio scrubbers.[Code]...
View 2 RepliesThe main problem is that the FLV doesn't load/play, which most likely causes the secondary problems, such as the bufferClip always visible and no way to test the video and audio scrubbers.
[Code].....
trying to make a play/pause toggle button in AS3. I'm a newbie but I've finished the site except for this element. my audio file works when i import to the library and it plays it in the preview. its in the same folder as the fla. working in cs3. This is what i've done.new as3 file. code.
var req:URLRequest = new URLRequest("ocean.mp3");
var s:Sound = new Sound(req);
s.play();
whats the deal? I get no compiler errors. i'm hitting option+Return on the mac to test the movie. I downloaded some one else's and it worked. i copied theirs into my project and it didn't work. i have a feeling its something to do with classes that i don't know about
face some problem here : Have 2 page of text to be show with sound. Also have 1 page let user to click on radio button to choose whether want to listen to the sound or not listen to the sound.
how to load the sound to play while the user click on tat page n if the user choose to off the sound all the sound on page 1 n page 2 will off.
The problem I have is simple: the play and load functions doesn't work in flash CS4 as defined in the documentation: URL...So to speak, I can only define like this: URL...My flash player version on all 3 fla files that I use is set to 10.And now with the GREAT issue I can't set startTime for the video and this is just GREAT.
View 6 RepliesI have a button which loads a sounclip into a movieclip: [AS]_root.myMusic = new Sound(emptyMC); _root.myMusic.loadSound("song1.mp3", true);[/AS] it will load the sound and play and stream it ... but in my output i constantly get this every sec: Error opening URL "file:///E|/Dir/Dir/Dir/undefined"
View 1 RepliesI am trying to close a sound so that I can load and play another but when I call the .close() on my sound object I get this error...
Error: Error #2029: This URLStream object does not have a stream opened.
at flash.media::Sound/close()
It tells me this even though the sound object is currently playing.
Here is the code I am using to initialize.
mainMusic = new Sound();
mainMusic.load(new URLRequest("lvl1.mp3"));
Then elsewhere I call...
Code:
mainMusic.close();
mainMusic.load(new URLRequest("WaterWorld.mp3"));
I'm dynamically attaching a movieclip linkage to my root timeline. The linkage has two layers inside -- a graphic shape mask and an empty movieclip for loading images. The empty movieclip is masked by the graphic shape mask.I'm using a MovieClipLoader object to load and manage the preloader for the empty movieclip when it loads images.Why does the mask sometimes work and sometimes not? Would the image type have anything to do with it? Or is it something to do with the act of attaching the linkage and then loading images into the empty movieclip contained therein?
View 5 RepliesA rudimentary question from a neophyte. I just want to play some music as part of my swf file and at the end of the song, automatically retrieve a web page. I'm finding a lot of answers for very complex questions, but nothing quite so basic.
View 11 RepliesI have to design a game for a school project that I have to redo to pass my year, but so far I have encountered several problems. My game is for children from 6 to 8 years old, so the game has to have a lot of sound (voice recordings) to explain the menus and the stuff they have to do.
[Code]...
I just installed CS5 Web Premium and took a movie, imported and exported with skin and html. [URL] It doesn't play, there is no skin. Everything is in the root directory - the SkinOverAll.swf, RooftopRites.swf. I don't see an embed statement in the HTML. Shouldn't there be one?
View 19 RepliesIm working between Dreamweaver & Flash cs4
Now i have a FLV video clip that i want play on a webpage with a full screen option so this is what im doing:
File > Import > Video
On my computer > Browse > (Found my file 17.8mb) > Load external video with playback component > continue
Skin: SkinOverPlayStopSeekFullVol.swf
Now its been imported i export it into my directory that im upload to my server (the swf file is now 59kb)
In dreamweaver drag the file onto my webpage and upload. When i view the page online it gives me an empty white box. Meaning its not playing.
When I export my flash movie to be hosted then embed it on my site (myspace) the flash banner(no controls) doesn't AutoPlay. I checked and unchecked Paused at Start in the publish settings, published and exported, but both times when I hover/click on the blank/unloaded movie the menu shows the Play option unchecked. My file has a preloader and the movie/content starts on frame 2. I have CS4/AS3.have the movie autopaly on it own. (I wish Adobe would have named the option Autoplay instead of Paused at Start,I wonder who came up with that).Here's my code:
Code: Select allstop();
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loop);
[code].....
I need to know how to load and play a sound from within a CLASS definition file. I know the normal way of doing this, but Flash MX rejects that syntax, so there must be some special way of using sounds in a class file.
I need to know how to code for "if the score increases by any value." So, if the score goes from 0 to 1, the sound plays ONCE. If it increases from 1 to 2, the sound plays ONCE again.
I am having a problem with playing sound in flash, actually I have a main file say (a.swf) and in it a sound is playing, then when another movie is loaded by LoadMovie say b.swf (which also has its own sound) both the sounds play. And when I stop the sound in the main file and load the movie again the sound does not play. I want the main movie to play its own sound and when I load another movie inside the main movie then I want to play the loaded movie's sound and when I close the loaded movie then the sound of the main file to be played. My Logic : Will onClipevent (load) { } and onClipEvent (unload) { } work on this ???? when I load another movie on empty movie clip ..
View 1 RepliesI used a preloader to play an external movie that loops. Both files are uploaded to a site. When I open the preloader in my browser the first time, everything works fine. The preloader loads correctly and plays the external movie automatically, which continues to loop correctly. So no problems so far.
Now, here's where problems begins:
If I refresh the browser or close it, and try to view the preloader/external movie again, nothing gets shown. I can manually play the external movie by right-clicking and selecting Play from the menu.
The only other way I can view the preloader/external movie again is if I delete the preloader from the cache and refresh/restart the browser.
My external movie does not have a stop in the first frame and it is uneditable so I can't add that in. However, the preloader should start playing the external movie when it is in the cache.
Here is the script in the preloader:
Frame 1:
Code:
mcLoader = new MovieClipLoader ();
loadListener = new Object ();
mcLoader.addListener(loadListener);
[Code].....
ActionScript Code:
for(var i=1;i<=11;i++){
this["l"+i] = new Sound();
this["l"+i].loadSound("resources/Audio/"+i+".mp3", false);[code].....
when i compile the movie - the mp3s don't play, nothing happens if i double-click on the swf, the sound plays - vey annoying
I'm having a sound object being loaded. And I want that for as long as it is buffering to have it written in a textfield "loading..." and when it starts playing to write in that textfield the name of the song. And i want this to happen everytime the buffer needs to load and everytime the song resumes play state.
View 1 RepliesI am trying to use a sound controller in a flash movie to play music and I am using loadMovieNum to load the sound controller movie at a particular point in the main timeline. I get the sound player to load up fine and the sound loads fine when a user presses play, but about a minute through the song the sound starts to play again, overlapping the song that is already playing.
This happens with no user interaction...it just takes about a minute. I also noticed that it is only when the sound player is within one of the movies. It doesnt happen when the sound player is all by itself. Is there something in my movie that is making it loop over?
I have a basic site for an old age home. Recently I decided to put a Flash Movie on the Homepage but even though all files are loaded and links correct it won't show in either IE or Firefox...
The movie should be loading here (...bellvilleseniorsentrum.com/engels/home.html)
There is a white space where the movie should be loading... But it doesn't...
I've done lots of sites with the same kind of movies and they all work fine... But this ons just doesn't work. It views fine when I test it on my computer but as soon as I load it - nothing...
[Code]....
I figure that it unloads the movie and doesn't get to the second action so it just shows a blank because if i don't unload the movie, it'll load a movie overtop of the old one. All of the stuff I found that could potentially help are overly complicated with variables and large amounts of code. Is a crazy amount of code required?
how they make this reverse play animation...
the one that [URL] did on their previous site design...
I am doing a flash which with audio, the audio about 3-4 mins. But when i use another flash movie to load that flash mov with sound (using load movie function), cannot hear any voice. Why is it? The flash movie with sound is use actionscript to attach the sound, when i test the movie, it is work. When it comes to load from another movie, it doesn't work.
View 2 RepliesI am using Flash CS4. To illustrate, I created a new flash file and added a short tick sound to the library. I set the properties of the sound to export to Actionscript and named the class "overSound". I added a Movieclip object to the stage to represent a button and gave it an instance name of "overButton". On frame 1 of the main timeline I added the following code:
[Code]...
[MX] I'm loading an infinitly scrolling swf into my main swf. When it loads however it doesn't work properly, because all the pixel values in the origonal code do not match for its location in the main movie. I know I can change the AS with new value and make it work, but I am wondering if there is another way. I'd like to be able to move it around and always have it work without changing it. Is there a way I can have the loaded swf retain its OWN origonal x,y cords? or some other method of doing this?
View 2 RepliesDrag and drop game. I'd like the instance to tint red when rolled over after it's been successfully dropped. I'd also like to play a sound file when clicked after successful drop. Here's the code:
ActionScript Code:
addEventListener("dropped", dropper);
function dropper(e:Event):void {
[code]....