I am trying to control a MovieClip around a scene. I know I can do this using the well known:
Code:
function onEnterFrame()
{
if( Key.isDown(Key.RIGHT) )
[Code]....
It appears that the function downListener is unable to see the class scoped variable xvel though I do not iunderstand why.
I have some scenes, and from the main scene, it can go to any other scene based on user click. but when it goes to other scene, how can i know wht is the current frame number and scene that i am going from? [code]...
View 3 RepliesIs there a way to mute all sounds in a whole scene? I want to have a button that turns off all sounds and stops all sounds from playing until i press the button again. The button is done and there's a "set(gallerysound,1) instruction in it when first pressed, and then it changes to zero the second time around. But now I'm stuck. How do i use this var to control the sounds in other keyframes? (preventing the sounds from playing until gallerysound changes again) ?
View 7 RepliesI have a movie clip that plays within my scene.I have only 1 scene which has 2 frames.How do I control what frame the scene is on from the movie clip? is it:
Scene1 on (release) {
gotoAndStop(2);
}
I have 2 swf's one loaded in level0 and another loaded in level1 (called from the first one). I want to put a button on the second swf that would control the first one by telling him to go to an exact scene and frame just like the gotoAndPlay action.
View 5 RepliesHow do I control the time line in an embedded movie clip from Scene 1?[code...
View 9 RepliesI want the movieclip in Frame 1 Scene 1 to finish before skipping to Frame 2 Scene 1 im using gotoAndStop("Scene 1", 2); at the end of the MC
View 1 RepliesI put a button in a movie clip to control actions in the main scene. Shouldn't that work? For some reason it doesn't.
View 11 Repliesive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
[Code]...
How can I get a button inside a movieclip link to a frame in another movieclip on the scene? I tried this code:
function gotoCenter(event:MouseEvent):void {
MovieClip(root).centermc.gotoAndPlay(2);
}
skruetest.addEventListener(MouseEvent.CLICK, gotoCenter);
..where "skruetest" is the button, "centermc" is the movieclip where I want to go to frame 2. I don�t get errors with this code, but nothing happens when I click the button. What can I do?
Check out this code:
[CODE]...
everything here is fine. It opens finely. But... i want to pass parameters where if i click a button in html page My.swf should open a particular scene called 'Scene 2' rather than scene 1. i tried
[CODE]...
I have a button inside a movieclip, to which I would like to apply a rollover function. When rolled over, this button (inside MOVIECLIP 1) would make (MOVIECLIP 2) jump to second frame. I'm using Flash 8.This is turning onto a real headache for me, since i've searched every single forum and thread concerning this matter, and nothing seems to work.
View 7 RepliesOriginally, the client wanted to control "hero_mc" using the keyboard but now they would like to control him with buttons only. Here is the original code on the "hero_mc" which works as expected:
[Code]...
I'm amateur flash-animator going to create his first flash game. Everything is sketched out perfectly and the only thing left to do is the programing. This is the subject I lack in the most (and that's the reason I decided to create a game...to learn) I'm using (the,by now, incredibly old) Macromedia Flash MX Pro 2004 (so that's AS2 I believe) for over 7 years now, but action-scripting is still mostly a vague uncharted territory. Sure I can get around most problems with scenes
[Code]...
I want to access a MovieClip in another scene than I'm currently in.
More specific I want to set a TextField to a certain value from a "preloader"-scene. This is for handling totally dynamic language phrases. Maybe this is the wrong way.
I'm loading a XML with language phrases that I want to replace the textfields with.
We could do this by altering all MovieClips, but I think this could be a smart solution, if it's possible! :)
I have a movieclip in my main scene. Inside the movieclip, there's a button. I wanted to so if I click on the button, it takes me out of the movieclip's timeline and play on the main scene's timeline. I tried gotoAndPlay("Scene 1", 1), but it just take my back to the first frame of the movieclip, not first frame of the main scene (scene 1)
View 4 RepliesI'm trying to get an effect of opening a particular movieclip in a certain way when you click a button on a scrolling background movieclip. There's an attached animation for visual explanation.Basically-
>Click button
>'ball' appears from middle of button (though a scrolling MC makes that hard so appears from mousecursor position)
[code]...
I want to have an animated button that go's to the next scene and plays. This is the code I have on the button inside the movie clip:
ActionScript Code:
on (rollOver) {
gotoAndPlay("rollover");
} on (rollOut) {
gotoAndPlay("rollout");
} on (release) {
gotoAndPlay("Scene 2", 1);
}
For some reason this doesn't work? Is the problem that the code on the button is within a movie clip?
i am developing small game, which is of 5 pages.in that next and back button is taken to move to next or back pages.so consider if user is on page2, on which page2_mc movieclip is displaying, now how can i chk that page2_mc is displayed..?my logic is clear,but i dnt know which syntax is need to use, i want to do like this way:
if (movieclip==page2_mc)
{
page2_mc.play();
}
[code]....
i opened the buttons from lindquist in this thread:I have posted already a reply but i thought it i good to start a new thread.
View 9 RepliesSo. I have movieclip buttons which should move to other scene(s). I have tried sooo many actionscript codes in these buttons but nothing have worked yet.
I made the buttons with this tutorial (in Flash 8): [URL]
I need to unload my movie clip. Here is the AS I used:
annie.onPress = function() {
_root.createEmptyMovieClip("container", 1);
loadMovie("annie.swf", "container");
container._x = 380;
container._y = 190;
[Code] .....
Problem is I only want it to show in one scene and it is covering everything on the other scenes as well or "Pages".
I am getting better at Flash 8, but I have a problem. I am in a Movie Clip, and when you press 'g' it returns you to the first scene, and I want it to go to the second scene.
on(keyPress "g"){
_parent.gotoAndStop("Scene 2",7);
}
Is there a way you can do that?
I have created a Flash movie in AS3.It has 1 scene so far titled "wmain"On the first keyframe I have a movieclip: "licence_mc"Nested within this movieclip is a button that does a little fade in/fade out animation over a range of keyframes when you hold the mouse on it.This buttons Instance name is: "license_bu"Right on the keyframe of this button (so within the mc "license_mc") I placed the following code:
Code:
license_bu.addEventListener(MouseEvent.MOUSE_OVER, onOver);
license_bu.addEventListener(MouseEvent.MOUSE_OUT, onOut);
[code].....
i have a probleme changing the value of a variable in movieclip from my scene. i explain: I have combobox on my scene containing categories,and in the scene i load an xml file containing links to php files that work with the combobox.Also on the scene i have a movieclip "filmstrip", inside this movieclip on the first frame i have a script loading the php file selected in the scene. i use a load() function with a variable "theUrl" inside like this : T.load(theUrl);.In my scene i want to change the value of "theUrl" inside the movieClip filmstrip. I tried filmstrip.theUrl = url; But it doesnt work
the xml file
<?xml version="1.0" encoding="ISO-8859-1"?>
<slideshow>[code]....
Have this code in main fla in a first scene with a simple movieclip.Seems not to work and cant figured it out
[Code]...
Basically I'm doing a flash website for my 3D animations. Once my intro animation ends my menu comes up which is within a main movieclip called menustage_mc and within that movieclip is a bunch of movieclips acting as buttons to navigate through the site and their animation.When you press on a button it will move to a particular scene. I'm using multiple scenes so i don't clutter the main timeline for myself. I've read a couple of posts saying that i shouldn't use multiple scenes but there is no explanation as to why. I'm assuming i should add and remove movieclips but i'm very new to actionscript and in particular as3 but that's a different question somewhere down the line.
My problem is that when i click on a button for example sketches, i want to finish playing the menustage_mc animation and then go to the sketches scene. However i'm trying different variations and am not getting any success. There are instances where the animation plays but then doesn't go to the next scene. Another instance is that it goes straight to the selected scene but doesn't finish playing the menustage_mc.So all I really want to do is finish playing the menustage_mc animation before it goes to the correct scene? I have seen things where I can go the menustage_mc and put nextScene(); on the final frame but it's not what i am really aiming to do.
I am in a second scene... and am trying to call a frame label in an mc in scene 2 is there a such thing as...
on(release) {
_thisScene.mymc.gotoAndStop("framelabel");
}
this scene?
I have added the following code to my mc, but how do I get it to display scene 1 frame one when it is done? After it is done reversing I need it to immediately go to that scene because it has all of my buttons showing. Here is my fla file:
[Code]...
I'm trying to make a scene in a game fadeout by have a movieclip. I have the movieclip and want to put inside the movieclip timeline some actionscript to go to the next frame but the simple
gotoAndStop("frame2")
doesn't work.
