I'm trying to make a file that creates an empty MC, then another MC is attached. Here is what I have, but it isn't working:[code]In the linkage properties for logoMC, I have the identifier set as "logoMC" and I left everything else blank.
View 1 Replies
Code:
thumb03.onRelease = function(){
image_holder.loadMovie("images/03.jpg");
submenu01_holder.attachMovie( "submenu01", "submenu01_new",this.getNextHighestDepth());
getURL("./htm/03.html", "tracker");
};
So I'm working on a portfolio and I'm trying to load an image with a submenu on top of it that will let you click through a couple different related images. However, right now the submenu keeps loading underneath the image, so the buttons are there and you can see it a split second before the other image loads over the top. I tried manually putting in levels for the image and submenu and no luck.
I'm trying to get the depths of all the blocks to be at the correct levels at the correct times so that the 3d effect is maintained. I've tried many things, but have had little success. All the instances of the blocks are stored in an array, but since it's adding them in accordance with when they're added to the stage, it doesn't help me locate them to swap depths. Is there a way to arrange them by location on the board?
View 4 RepliesThrough attachMovie I have loaded an mc from the library onto the stage into "holder_mc".
myButton.onRelease = function () {
if (currentWork != "holder_mc.myWork1_mc") {
holder_mc.attachMovie("myWork_mc","myWork1_mc", getNextHighestDepth());
currentWork = "holder_mc.myWork1_mc";
}
}
This works.
However, there are a couple of buttons (mc) inside "myWork1_mc" which skips through a few slides in the myWork1_mc clip that I cannot target. I thought using:
holder_mc.myWork1_mc.buttonName_mc.onRelease = function () {
trace("MC_pressed");
}
... would work. My curser doesn't even change to the hand symbol. How do I target an dymanically loaded MC from the library which is inside an empty holder MC on the stage via attachMovie? What am i missing? Believe me, I have spent hours trying to google it.
Note: at this stage there is no other script on "holder_mc", but there will be at a later date, but I'll cross that bridge when I get to it. Also, the buttons work when I place the MC onto the stage and not use attachMovie.
i was wondering if it is possible to use attachMovie with variables using flashvars from html. im kind of new to AS and would like to know if anyone could help me out here
i need to make a single SWF in wich some movieclips can be replaced by others through the html code without editing the swf file.
i already know how to enter the variables on the html, but i dont know how to apply this to attachmovie command in the flash file.
So a clip is attached to a clip, and that works fine, but how do I get code on to the attached clip? I've tried duplicateMovieClip...but it's not working...
View 1 Repliesfor (i=0; i<policy.length; i++) {
newOpt = Stocklist_MC.attachMovie('Option', 'Option'+i, i);
I've got a ScrollPane on the root stage. This loads a MC called 'Stocklist_MC' (this also has a linkage/export name of 'Stocklist_MC'). When I try to use '.attachMovie' to the movieclip (Stocklist_MC) inside the ScrollPane nothing appears. All the AS is on frame 1 of root. Everything works when I use '.attachMovie' with _root. for (i=0; i<policy.length; i++) { newOpt = _root.attachMovie('Option', 'Option'+i, i); Also, if I drag Stocklist_MC to the stage I get everything working but list gets cut off at bottom, which is the reason why I need it in a scrollPane.
the traces get triggered, which means so should the attachMovies, but nothing else seems to happen?[code]
View 3 RepliesI've been battling this project, and finally got it all wrapped up and working, and was feeling pretty proud of myself, and then I went and posted the exact same .swf on the web and it doesn't work anymore.Specifically, there are a bunch of icons which are placed into the FloorMC which then attachMovie a copy of themselves into a LegendMC and UtilityRefMC, but they dont seem to be attaching anything when I run it through a browser.[URL](I'd love to attach the swf and fla to this message, so you could take a look at those, but apparently that would be crazy.) thought perhaps it had to do with me using _root, but I went through and changed them all out to _globals and _parents and it still no likey. Furthermore the Comment Box in the bottom left gets triggered by _root commands form all sorts of different levels, and it seems to work fine, both on the web and off.
View 6 RepliesWhat I'm trying to do is simply this:
<variable> = mvcShip
var ship1 = _root.attachMovie( <variable>, shipName + _root.getNextHighestDepth(), _root.getNextHighestDepth() );
What i am trying to attempt here is to make the variable equal to the name of an item in my library. (Im using this to use different ships in an old arcade-style vertical shooter). This is meant to make a ship appear on stage.
When <variable> is replaced with a library item (eg. mvcShip), it works fine, but if the variable is in place, i get a trace value of ship1 as "undefined", and the ship doesnt show up on the stage.
BTN_2.onRelease = function() { gotoAndStop("ans2"); Comments_txt2.text = title[2].comments[0].nodeValue; toolName_txt2.text = "Tool Name: " + title[2].hidden[0].nodeValue; mclip.loadClip(title[2].image[0].nodeValue,
[code]....
I am using this simple line:
ph_out.attachMovie(ensembles,ensenbles1,1);
where "ph_out" is an mc that receives the movie"ensembles" is an mc that I want to load in ph_out and it has as linkage name: "ensembles"
I have a linked movieClip in my library with the identifier "arrow" i want to run a for loop and attach this clip to movie clips on my stage named blank0 blank1 blakn2 and so on.
[Code]...
I am trying to create a pair of custom drop down menus (one for states, and then one for each states counties). I have an XML doc that contains all this info, which I am parsing out into an array(sc). What I would like to happen is when the user rolls over the states drop down arrow(stDropArrow_mc) that I run a for loop which attaches some movie clips to a states movie clip already on stage(states_mc), fills in the state name in a display text field(display_txt) within the attached movie, within the "states_mc" on stage(root timeline). so essentially(states_mc."NEW ATTACHED MOVIE CLIP NAME".display_txt.text) Here is a code sample that I am using...
[Code]...
When you attach a movieclip taken from the symbol library to the Stage, by using the attachMovie function and its Linkage name, do you have to - previously - place a dummy instance of the mc anywhere on that Stage to get it works ?
View 5 RepliesI am trying to revise the very first flash project I ever did and it's become a complicated mess. I have created an interactive atlas. I am using my favorite map zooming and panning tools supplied by Senocular which can be found here: http:[url].....For the panning/zooming/drawBox tool to work the map features must be buried deep within several movieclips. There is one level at which you can put buttons that aren't effected by the code for the panning/zooming etc. Buttons have to go on this level or higher if you want them to work.
The way my atlas is set up - there is a main interface that has these tools plus the menu system. The menu (xml; created by Lost and Sen - brilliant, thank you) loads in two external swfs - one is the map itself and the other is a set of "controls" for that particular map (radio buttons, check boxes, text links, etc.).I have a couple of external swfs that have buttons on them that do things when you roll over and off them. If I have these buttons sitting on the map then when it gets loaded into the main interface they no longer work. So I am trying to use attachMovie to attach them to an MC within the zooming tools in the main interface at a level they can be active.But it's not working.I am guessing it's because the code to attach them is being fired before the external can be loaded into the interface. So I'm not really sure where to fire the attachMovie code. Does it go with the external? Does it go with the controls for the external?
I can supply code if needed though like I said, this file is a mess. There are 15 external maps with 15 "control" files. Plus the main interface, plus some other miscellaneous files.
I have a loop and in it i am attaching a movie clip (basiccly its just a row with data). The movieclip has a alpha fade in it. Now I want to delay each attachmovie function so that the movies are attached one by one rather then trow them all on the screen at once. (plus it looks better with the alpha fade).
I tried the setInterval but it wont work (ex.:Interval is 1 sec, and if im going to attach 6 MC, flash wait 6 * 1 sec, then show them all)
And is it possible to attach a movieclip inside a othermovieclip thats not on the same frame (the other MC is on frame 10)?
I want to attach a MC dynamically so that I have 12 rows and 12 columns of _mc box on the main stage:[code]I think it can be done only with a nested loop but so far, well, my head's in a loop!
View 11 Repliesode:
_root.curenemno=1;
_root.curenem=[["clam",5]];
Then when as a current temporary sort of arrangement i attached this using the attachmovie function:
Code:
_global.enemies = _root.curenem;
_global.enDataArray = [[]];
popped = _global.enDataArray.pop();[code]....
I want to attach a preloader to the main stage of my site to load in external JPEGS and SWF's and to do this I need to pass certain parameters to my preloader, such as the preloaders width and height. How do I make use of the initObject parameter for attachMovie()? I know I need to either define a constructor or somehow access the current movieClip's constructor, but I have no want to create a custom class for my preloader movieclip, I just want to be able to get certain information when I attach the preloader. Do I really need to create a custom class that inherits from movieClip?
View 3 RepliesIs there a way to link duplicated movieclips to the library? Because I need to attach these duplicated mc's to an other mc. So my problem is that I don't have a linkage identifier?
View 8 RepliesI'm confused as to how to reference a movieclip after using the attachMovie method. Here is my code:
[Code]...
Is there an alternative to attachMovie that I can use to put my movieclips on to the stage. Here is my problem, I have 2 frames total in my fla file, and in each frame I have buttons that when you click on them it attaches the corresponding image from the library. Problem is when you click to go to the next frame, the attached image stays.
I basically want it to stay attached only until you hit the next frame.
I'm new to attachMovie and have a question (or 2).I have a button that when pressed, will load a movie that I can then drag around.here's the actionscript on my button ("FFC_frame" is the name and Identifier name of the movie clip I'm loading, FFC_frame2 I think is the new movie it actually loads, then i have a startDrag that works fine, and a stopDrag that doesn't work at all):
on (release) {
attachMovie("FFC_frame", "FFC_frame2", 1);
FFC_frame2._x = 100;
[code]....
i have a series of thumbnail images, each one of them actions attachMovie - bringing it's own movieClip to my stage.
When a different thumbnail/button is clicked, I want the currently playing movieClip to fade out while the new mclip fades in.
i am trying to attach 78 movieclips in a 3 column grid, each column needs to have 26 names that need to be ordered and numbered from top to bottom, not from left to right. so the top movieclips should be 0 26 52, not 0 1 2. i am using the following, but can't figure this one out.
[Code]...
I'm trying to use attachMovie with a variable - so that the attached linkId is dynamic.
Kinda like this
[Code]...
This is my first post, and and im not sure this is the right place to do it, but i need some help.
With AS2 in CS3, im trying to attach a sound from library, to a button that is also attach from library, when reading a XML file, but not yet succeed.
I want to play this sound the first time the button is attached and also onRollOver.
I'm trying to have an attached movieclip in code render in an avi file. I Googled this before, but its tough to find since its a really specific issue.
For example, if I place a clip on the stage manually, it will of course render when I export it to an avi. But when I have something placed with code it does not. I really want to use the coded movieclips. Is there a remedy for this?
This actionscript for "attaching" five balls refuses to work! Why?
for(i=0;i<5;i++){
balls=attachMovie("aball","b1"+i,i);
balls._x=100+i;
balls._y=100+i;
}
Note:aball is the linkage name of the movieclip.
