I am trying to draw a triangle and square using a movieclip that follows the pen of a line.It works, both triangle and square draw together. But I keep getting a flicker of a movieclip in the top left corner.
View 0 RepliesI want to build a specifik thing in flash, and don't really know where to start.... Say I have:
3 images of 3 three different squares
3 images of 3 three different triangles
3 images of 3 three different circles
The first thing you see is Square 1, Triangle 1 and Circle 1. If you were to click on Choose Square, Square 2 will appare in Square 1s place. If you click on it one more time, Square 3 will appare, and then round again to Square 1. Same thing for all the shapes.When you're satisfied with your selection of shapes you click OK and then you get to see a movie, based on whatever choices you've made. Because there are 3 different shapes and 3 different objects within each category, there will be 9 different movies to watch (3x3=9).One example of how this could turn out is:
Square 1 + Triangle 1 + Circle 1 = Movie 1
Another one could be
Square 2 + Triangle 2 + Circle 2 = Movie 6
It's easy to draw a round cornered rectangle/square but how do you draw a triangle with rounded corners?
View 4 Replieswhy do when I draw a triangle for instance with the pen tool, and then I rotate it with the free transform tool, so while I rotate the triangle, it is scaled and dissorted its shape, and it lengthen a little. And I don't know how to prevent it.
View 4 RepliesHow to draw a triangle in a math graph which displays X and Y axis.
View 2 RepliesIs there a simple way to draw a triangle with rounded corners in AS3?
View 1 RepliesDraw a Triangle with rounded corners?
View 2 RepliesI'm new to actionscript 2.0.I want to draw a triangle with an arc showing the angle of the triangle at each corners.I need this in actionscript 2.0.
View 3 RepliesTrying to draw a triangle and then fill the color inside using the paint tool. I am not able to fill any color inside. Made sure the lines are overlapping, tried using the fill large gaps, made sure alpha is set to 100%.
View 3 RepliesI found the following code within a tutorial on the Kirupa website showing how to draw a square using ActionScript but I was wondering if it would be possible to modify this so that each line is animated in turn to construct a square (similar to the mouseover effect on the URL...website (right column 'Showcase' graphic)):[code]
View 3 RepliesHow it is possible to draw a square in Flash if co-ordinates are is in XML?
View 3 RepliesI'm trying to draw a 1-inch square so that when I hold a ruler up to my monitor, the rendered square measures exactly 1 inch.But when I draw a screenDPI x screenDPI square, it does NOT measure 1 inch.In fact,screenDPI remains the same even when Capabilities . screenResolutionX (and Y) change.I'm guessing screenDPI is really max theoretical dots per inch for your monitor at it's max resolution,or something like that.So is there a way to draw an actual 1-inch square?
View 2 RepliesHow do I draw a square shape with a gradient fill in AS3?
View 3 RepliesWhen i try and draw anything like a square or a line it is green. Also when i try and fill naything it doesnt work!!!! It is quite important that i get it fixed because i need to use flash for an assesment that is due in next week!!!
View 1 Replieshow to draw a square/circle/anything one pixel at a time, using Actionscript instead of tweens?
View 1 Replies i want to change a colors tint and store that color for later use to apply to dynamically created sprites, for some reason the code changes my place graphic as expect but when i draw a square using the Colortransform.color property the color always in gray scale?
Code:
package{
import flash.display.*;[code].....
I am trying to work with this flash tutorial -[URL] So far it draws with a simple rounded line. I have been extending this application by making the drawing board bigger and other small things. I now want to be able to choose the line style. Currently it is rounded and I want to choose and draw with other shapes - square, forward slash (/), backward slash (). Is this possible? If so, could you explain how I could go about it?
View 1 RepliesI set up a loop where a movie clip moves in a triangle over and over. It works, but I want it to pause for 5 seconds at each location, so I added a Timer (my first attempt). Now, it will go through the triangle once, pausing correctly, but then the main movie clip (target_mc) stops in the original position and never moves again.
Code:
import fl.transitions.*;
import fl.transitions.easing.*;
var xMove0:Tween;
var yMove0:Tween;
var xMove1:Tween;
[Code] .....
I'm trying to do some lean blitting for an object that rotates by rotating it once at startup and capturing a BitmapData snapshot of each 5 degrees. The problem I'm having is that the draw() method of the BitmapData object is only picking up pixels in the MovieClip that are below and to the right of the registration point. If I change the MC so that the registration point is in the top left corner, I sometimes get what looks like most of the pixels, but the entire object rotates into and out of the frame, since it's rotating around the corner and not the center.
View 5 RepliesI need to be able to draw a thick patterend line between 2 points in AS3, I can't use the draw API because it doesn't all me to actually put detail (pattern etc) into the thickness of the line, I thought about perhaps using the line to create a bitmap version and then using that as a mask, but I remember many years ago seeing some examples that use a movieclip as a source for a line.
View 1 Replieswhen creating a dynamic square with the api. 400 by 400. I am not sure why it wont draw the object
[Code]...
I have this game, and some levels have a moving square as the player, you move the square with your arrow keys.... I want to have an enemy square that chases the player square.... They only chased mario when you didn't look at them? Kinda like that...... but in this regards:
I only want the enemy square to chase the player square when the player square moves.... soo say the player square moves 5 pixels per movement (know how to do all that), I want the enemy square to move when the player square moves..... towards the player square at like 7 pixels per movement..... so eventually you won't be able to avoid the enemy square....
I am messing around to learn more about actionscript and I am trying to have a square movieclip resize itself so both sides are equal to 50 here is my code on the movieclip it does the resize and all but it keeps on going. I am not sure how to stop it.
[Code]....
I have a movieclip that I am using greensocks transformManager with so the user can rotate, skew, and scale the clip. This works fine, but I am trying to add a crop tool. If the image is rotated, when I send the image to the crop tool it measures the height of the image by the bounds of the rotated image, not the actual height of the image if it were square (re: not rotated).
So, what I tried to do what, after sending it to the crop tool, rotate it back to 0 before getting the bounds using this code:
[Code]....
I don't understand the math here. Shouldn't it just rotate 3rads in the positive direction to equal it out? How would I return it to 0;
How would it be possible if draw a square, then put movieclip to move in it. It would move when rotate another movieclip..
View 0 RepliesI'm stuck with trying to target a movieclip dynamically from a loop. I'm using the square brackket syntax but I can't figure out why it's not working. Here's what I'm trying to do:
Code:
this.t1.t1._alpha=20;
And here's how I'm trying to do it:
Code:
this["t"+1+".t"+1]._alpha= 20;
hey guys, so, im going through colin moock's book, "the definitive guide", and im learning about global variables. so in his lesson he says to do this:
1. create a movieclip called square, with a square inside of it.
2. in the square mc's timeline, on frame 1, place this code :
_global.day = "tuesday";
3. go back to the main timeline and on frame one put this code:
trace(day); no according to moock, when i run the movie, it should output "tuesday", but all i keep getting is "undefined".i'm running mx 2004, so im wondering if that has anything to do with it.
How can I make an extrusion for a red square movieclip in flash or as3?
View 4 RepliesI have a circle_mc on the stage. Then I create randomly placed 20 squares (square_mc) on the stage. I can move my circle on that stage, and all I want is to check hitTestObject(or any *yet unknow for me* method that gives a result) if circle touches any of squares. Then I need to remove that touched movieClip (square) from the stage. hitTestObject checks if 2 specific objects are touched. My question is how to know which square is which, and then if it touches with circle_mc to remove it from the stage.
Code:
Select allif (circle_mc.hitTestObject( ?whatHere? ) ) {
?whatHere?.removeChild( ?whatHere? );
}
I have a square movieclip named squarepad. What I want is when I click on it to do [some stuff] according to where the square is clicked. It should be something like this:
if ([mouseclickedx] > 1) and ([mmouseclickedx] < 10) then
[do this]
end if