I have some rectangles inside a movieclip. All movieclips are created by actionscript. I want to limit the size of the movieclip on top right corner when user starts drag.
Code:
this.holder_mc.onEnterFrame = function() {
this.holder_mc.rectangle_6._xscale = this.holder_mc._xscale-260;
[code].....
how to get a movieclip named "topnav" to resize it's width to match that of the stage. I am trying to resize the width of a top nav bar across a resizable RIA. I have started with the following code but with only partial success:
Code:
stage.addEventListener(Event.RESIZE, resizeListener);
function resizeListener (e:Event):void {
var reg2 = stage.stageWidth / 100;
[Code].....
I've created a ComboBox skin by extending mx.skins.ProgrammaticSkin. It's working fine, except I can't figure out how to limit the width of the text. Is there a way to control this within the skin?
See the attached image for an example of the text going too far. I would like it to stop before the separator line to the left of the down arrow.
I wonder if any of you can point me in the right direction. In my stage I have a movieclip where I want to load several images with different sizes. This mc called "container" adds the loader to the stage so I'm asking for the loader width and height once has finished loading and then passing these to the width and height of the mc container so it resizes accordingly. But...it doesn't work. Here is my code:
[CODE]
var pic:Loader;var totalImages:int = 10;for (var i:uint = 0; i<totalImages; i++){ pic = new Loader() container.addChild(pic) pic.load(new
[code].....
I am loading jpgs into an MC. I make sure I wait to run and modification to the MC by confirming the image is loaded first.If I comment out the IF statements within the function "RW_pic_modifications()" and I trace the width and height of the MC AFTER each photo is loaded, I successfully trace the correct W and H.
My issue, however is when I DO RUN IT THROUGH the conditions within the "RW_pic_modifications()" function. Then any modifications to the MC W and H seem to compound and apply it to each iteration of the next MCs.I confirmed that my code and logic is correct. I just dont understand why performing a resize to the MC with one jpg loaded into it is not reset to the NEW JPG loaded into it, after the new JPG is loaded.
NOTE - I have an MC that stops on a frame until all the code here is executed. Once complete, then this MC plays to allow the pic to stay on screen for a given amount of time THEN it calls on the RW_Pauser() function.I am way over deadline.
Code:
How_long_to_pause = 4000;
Maximum_Image_Width = 137;[code].....
Since I only need numbers, can I limit dynamically embedded fonts to only numerals, periods, dashes and special characters copied from the character map?
View 5 Repliesa movie clip symbol is designed and subclassed in Flash, but get instanced and addChild-ed in AS3. It works well as long as I don't change it's width/height property (scaling works too), but if i do, it disappears
View 2 RepliesI have a question that I would really love answered. I have put script on a button which will scale a movieclip in intervals when pressed by the viewer. My question is if there is a way to tell it to stop at a certain point? Here is the code on the zoom button.
Code:
on (press) {
bigscan1._xscale += 25;
[code].....
is there a way to dynamically change the width of swf, accordingly to width of browser?
everybody hates horizontal scroll, but i don't want my flash movie to be tiny
I have a Movieclip on stage with nested movieclips inside. All referenced at 0,0. None of the child movieclips load any dynamic content, animate or have Masked Layers. It does have an input textfield in one of the child MCs. The parent MC shows 280 px width, while it returns 313 px with a .width trace. There is no code that alters the .width value of the parent MC at run-time. And the ParentMC on stage is not scaled (it is at 100% width/height)
View 1 RepliesI have my object which is supposed to re size keeping the original ratio of width/height.. I am using a listener since the stage is set to "noScale".
My object is resizing but I don't know how I can make it keep the original ratio?
I have been given the seemingly simply task of resizing a Group container by setting width and height explicitly in response to user interaction. However, changing these values have no effect on the size of the container at all. Changing scaleX and/or scaleY will change the size of the container just fine, but this is not the behavior I am after.I have tried overriding updateDisplayList() to set a specific width and height, but this has not yielded the desired results.
<?xml version="1.0" encoding="utf-8"?>
<s:Group xmlns:fx="ns.adobe.com/mxml/2009" ;
xmlns:s="library://ns.adobe.com/flex/spark"
[code]......
I would like to change the width of the rollover-resizing of this menu to 400 px,
ActionScript Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;[code]...
I have a Label inside a VBox.
My VBox has a width of 100% so when the widow is resized the VBox scales to the size of the window.
I want the Label inside the VBox to scale relevant to the size of the VBox containing it, so for example if the VBox is scaled to a very small size and even height of "0" the label will not be visible.
is there anyway I can do this in ActionScript?
I have tried so far to add a resize listener to the vbox performing math calculations on the label height and font size, which worked to a certain degree, however was jerky and the performance was v-slow when the calculation was performed on many VBox containing Labels simultaneously.
I have a problem on resizing dynamically loaded swf in to a flash movie. The senario is
1) swf files are uploaded by users and the path of the swfs(flash banners) are taken in to the flash via flasvars.
2)so swf uploaded for each user is displayed in a loop
The problem is user may upload swf with different sizes.So I want to re size them to main movie size(ie 500*70) So what i tried to do is using MovieClipLoader and fix the size in onLoadInit function.But it gives really different sizes
than expected.
I cant understand why flash behave like this.
1)Can i resize the extaernal swf by using above method?or
2)what is the approach to re size dynamically loaded swf s?
I'm looking to resize and move a movie clip with Actionscript and Easing. Here's an example of kind of what I'm looking for...
[URL]
I'd really like to do it using Flash 5, is it possible?
I am building a flash site for my own photography business and the site is designed in such a way that it will scale from 1200x720 down, but never up. So on the biggest monitor, the biggest this should get is 1200x720.
I am having an issue where after you resize the page down smaller than the biggest, i the main container of the content "mainStage" is too small, and even after maximizing the window, it is still stuck on a small size.
-- if you refresh the page with the window at ANY size, it works PERFECTLY.
-- if you resize the browser without refreshing the page, you will reproduce my issue.
I have uploaded the page here to be seen. [URL]
-- Here is the source for this. [URL]
i really want to get this resizing dynamically to work before i work on the rest of the page.
does anyone here know a free or commercial slideshow component for AS3 (must work with flex 3) which does the following:
cross-fading,ken burns zooming and panning with per image definition (eg. with xml file)scale-to-fill resizing of images dynamically resizable frame size (so it can be used as a browser background)It should work like on the following site [URL]My client wants this, but programming it from scratch will take rather long
I'm testing this idea of mine, but so far I've not been awarded succes.so, here's what's my idea about:I want to load a big background-picture into my Flash, and then I want it to be resized so it fits the screen-resolution that the user has on his/her browserit loads perfectly, and - from what I can see - keeps it's dimensions.but it does not resize to the size of the browser as it should....if you go to the link, and then manually resize the browser-window, you'll get the resizing of the background-picture going on, though.here's how it's all build:I have a test100.fla with a test100.as Document Class
test100.as:
Code: Select allpackage {
import CustomBackgroundTest;
[code]....
I am uploading different size of images dynamically but at the same time I want the stage to be resized accordingly to image's height and width.
View 11 RepliesI've tried a few ways but nothing seems to work. What I'd like to do is have my users post video's with the given embed code (example):
<object id="cnbcplayer" classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="400" height="380" codebase="[URL]">
<param name="type" value="application/x-shockwave-flash" />
<param name="allowfullscreen" value="true" />
<param name="allowscriptaccess" value="always" />
[Code] .....
But then, I want to resize it to be 300px wide. I've tried updating the attributes with jQuery but that didn't work.
I've got a client who's asking about resizing dynamically loaded images in flash. basically i'm building him a button that displays dyn. text and loads a .png based on a variable (easy). I'm going to tell him that actionscript/flash really has no means of resizing a loaded image and that you need some type of server-side script to do all of that.
View 2 RepliesIm building a site for a photographer, all images are xml driven.. When a thumb is clicked the full size image is loaded into an empty movie clip.
I am after a similar effect as seen here..[URL] If you resize the window the image resizes to scale...
I have managed to align the rest of the movieCLips to the stage when it is resized in its right positions just can't get the image to resize!.
I have a weird problem with Safari 5.0 and Flash player 10.1. When I resize the flash html object via ExternalInterface and JavaScript flash will jump down the page a little bit for a fraction of a second. Here is an example: [URL]. This may not be a flash question at all. It may be a CSS or JavaScript problem. It seems to only be a problem with Safari 5 and Flash 10.1.
You can view the source of the html page. Here is the code inside the sample FLA:
one.addEventListener(MouseEvent.CLICK, oneClick);
one.buttonMode = true;
two.addEventListener(MouseEvent.CLICK, twoClick);
two.buttonMode = true;
this.addEventListener(Event.ADDED_TO_STAGE, addedToStage);
[Code] .....
I have a Flash/Flex object (Flashlight-VNC), which I would like to dynamically resize to fit the entire window after pressing a button in the Flex app. This would preferably happen without restarting the Flex app (and therefore the VNC session). I would just use the built-in Flash fullscreen mode, however Adobe's somewhat silly security restrictions prevent keyboard input while in fullscreen mode.
How exactly can I do this? I'm already using SWFObject to embed the SWF, if that helps. I am open to any solution utilizing ActionScript, JavaScript, or both, however I am not all too familiar with ActionScript or Flex, and the AS-based solutions I have found involve extending a "Sprite" object to add resize functionality, which Flashlight-VNC does not seem to use.
I have two movieclips, one loads an image, I resize that mc and add it in a bigger movieclip which has to be resized too. My problem is that that the inner movieclip doesn't resize the way I want although I've tried many variants of the sequence of the commands. I've also taken into account something that I read that an empty mc resizes strangely but it didn't change anything.
that's the code:
loader_mc.x=0;
loader_mc.y=0;
cont_mc.x=1440;
[Code]....
red mc is the outer one but the sizes of the inner are not right it should be about one third of the outer but it's about two thirds. same with the height.
All I want is to be able to resize them independenlty. with the outter beeing bigger than the inner
I have two movieclips, one loads an image, I resize that mc and add it in a bigger movieclip which has to be resized too. My problem is that that the inner movieclip doesn't resize the way I want. I've also taken into account something that I read that an empty mc resizes strangely but it didn't change anything.
that's the code:
loader_mc.x=0;
loader_mc.y=0;
cont_mc.x=1440;
cont_mc.y=0;
[code]...
the size of the outer is right 1440x1000 but the sizes of the inner are not right it should be about one third of the outer but it's about two thirds. about same with the height.
All I want is to be able to resize them independenlty. with the outter beeing bigger than the inner. Or to be exact I want the the inner to fit exactly the height or the width of the outer depending on which site of the inner is bigger( for example if the inner's width is bigger than its height then the inner width gets as big as the outer's width and then inner's height gets resized according to its ratio) and furthermore to center it in the middle of the outer.
I'm loading a pic using a config file like:
[AS]
onClipEvent (load) {
loadText = new LoadVars();
[code]....
i'm new to action script 2.0 and i want to create a movie clip dynamically whose position and dimensions are changed in each frame as loaded from xml;
[Code]...
the position and dimension are changed but the problem is the last dimensions are not removed and it get bigger n bigger
What I'm trying to do build an FLV player which will take the size of the FLV movie and dynamically adjust the stage width/height to match the FLV.
View 2 Replies