ActionScript 2.0 :: Width Of A Dynamically Loaded Jpg?
Feb 12, 2004I'm loading a pic using a config file like:
[AS]
onClipEvent (load) {
loadText = new LoadVars();
[code]....
Similar Posts:
Flex :: Width/Height Of Dynamically Loaded Image?
Nov 16, 2009In my Flex application, I've got a component that extends UIComponent where I'm loading images at runtime and try to display them. I've tried lots of different approaches (using beginBitmapFill(), using different containers), but I can't get things to work as I want. The problem seems to be related to the width and height properties of the image, which aren't updated correctly.The idea is:
var sprite:Sprite = new Sprite();
addChild(sprite);
var im:Image = new Image();[code].....
The image's width and height doesn't seem to be correct when it's loaded. I get width==0 (and nothing is displayed), but the property $width seems to be correct. How can I assure that width and height of the loaded image is updated?
IDE :: Detect Width Of JPG Dynamically Loaded Into Blank Movieclip?
Feb 4, 2009I am loading jpgs into an MC. I make sure I wait to run and modification to the MC by confirming the image is loaded first.If I comment out the IF statements within the function "RW_pic_modifications()" and I trace the width and height of the MC AFTER each photo is loaded, I successfully trace the correct W and H.
My issue, however is when I DO RUN IT THROUGH the conditions within the "RW_pic_modifications()" function. Then any modifications to the MC W and H seem to compound and apply it to each iteration of the next MCs.I confirmed that my code and logic is correct. I just dont understand why performing a resize to the MC with one jpg loaded into it is not reset to the NEW JPG loaded into it, after the new JPG is loaded.
NOTE - I have an MC that stops on a frame until all the code here is executed. Once complete, then this MC plays to allow the pic to stay on screen for a given amount of time THEN it calls on the RW_Pauser() function.I am way over deadline.
Code:
How_long_to_pause = 4000;
Maximum_Image_Width = 137;[code].....
ActionScript 3.0 :: Resizing Movieclip Width To Stage Width Dynamically?
Jul 13, 2011how to get a movieclip named "topnav" to resize it's width to match that of the stage. I am trying to resize the width of a top nav bar across a resizable RIA. I have started with the following code but with only partial success:
Code:
stage.addEventListener(Event.RESIZE, resizeListener);
function resizeListener (e:Event):void {
var reg2 = stage.stageWidth / 100;
[Code].....
ActionScript 2.0 :: Dynamically Change The Width Of Swf, Accordingly To Width Of Browser?
Feb 15, 2007is there a way to dynamically change the width of swf, accordingly to width of browser?
everybody hates horizontal scroll, but i don't want my flash movie to be tiny
Flash8 Dynamically Adjust Stage Width From AS?
Sep 22, 2009What I'm trying to do build an FLV player which will take the size of the FLV movie and dynamically adjust the stage width/height to match the FLV.
View 2 RepliesActionScript 1/2 :: Dynamically Resize SWF Width And Height?
Jan 4, 2012i have different size (wxh) swf files, and i have to load different swf in one SWf file(say name sample.swf) now what my problem is when i load different swf in my sample.swf either it crop disply if bigger swf load or it leave space if it small..
sample.swf(300x300)
1.swf(200x200)
2.swf(400x400)
3.swf(300x300)
4.swf(100x500)
5.swf(50x350)
ActionScript 2.0 :: Dynamically Changing Height And Width
Aug 11, 2005I want to change the height and width of an object (specifically doubling it) after an interval of 2 seconds until the height and width of the object reach over 100. I've made two different scripts to try to make this possible.
[Code]...
ActionScript 2.0 :: Flash8 Set Max Width/height For Dynamically Called MC
Nov 27, 2009How do i set the maximum width and height of a dynamicly created MC. It is a mc holding an loaded image.
This is what i got sofar:
Code:
createEmptyMovieClip("imagecontainermedium", getNextHighestDepth());
// set the alpha to not see the picture loading...
imagecontainermedium._alpha = 0;
[Code].....
ActionScript 1/2 :: Dynamically Changing The Height And Width Of Stage?
Jun 3, 2009how can I change the height and width of stage dynamically. I tried it with the following code:
Stage.height = 250;
Stage.width = 250;
during the run time. Initially the Stage is at a height and width of 370 and 450 respectively. Also when I tried to trace the height and width of Stage after resizing the stage width and height, its showing the old value of width and height. That means the width and height not chnaging.
ActionScript 3.0 :: Dynamically Change Stage Width & Height?
May 13, 2010How to Change Stage properties(width,height,bitrate,color......etc) in dynamically...?
View 1 RepliesFlex :: Dynamically Change The Width Of Datagrid Column?
Jun 16, 2009Can we change the width of the datagrid column dynamically by clicking on the border of the column in order to display the complete string which is too long to be displayed and needs to be scrolled ? If so, How ?
Also, how can we ensure that the column width changes dynamically based on the number of characters / length of string; since many a times the data is too long to be displayed. Can we set the column width to take the length of data into consideration before displaying onto the datagrid ?
Flex :: Get Width Of Dynamically Created Custom Uicomponent?
Jul 15, 2009I have some custom components, that derived from UIComponent. I overloaded the updateDisplayList so they have custom look. I've created a layouter that lays out these custom components, but to place them correctly, I have to know the custom componets width, height. They are created dynamically. After all of them created (creationCompleted event fired for every), i try to laying out them, but width/height property is still 0. I am also tried to add them to a canvas, before the layout process.
how to create custom UIComponent that placed dynamically, and get to know the width and height of it.
With the use of the mx_internal namespace I can set width and height (using the internal $width and $height fields), and it looks like it is working. But not so clean/good solution.
ActionScript 2.0 :: Dynamically Resize Stage Width / Height?
Feb 8, 2009I'm using an xml attribute to control stage width/height. I've set up two variables (stageW, StageH, respectively) but when I [code]...
View 4 RepliesActionScript 3.0 :: Dynamically Add Movieclips Constrained To A Containers Width?
Oct 16, 2010I've got a problem with a (seemingly) simple equation that i can't quite figure out.
My problem is as follows:
I've got a pretty basic for loop that creates a 'thumbnail' and puts it next to the previous one (With a little padding) inside a containing movie clip.[code]...
ActionScript 2.0 :: Dynamically Resizing/limiting Width Of A Movieclip?
Sep 23, 2008I have some rectangles inside a movieclip. All movieclips are created by actionscript. I want to limit the size of the movieclip on top right corner when user starts drag.
Code:
this.holder_mc.onEnterFrame = function() {
this.holder_mc.rectangle_6._xscale = this.holder_mc._xscale-260;
[code].....
IDE :: GlobalToLocal3D - Determine Parameters To Dynamically Resize The Width Of MC
Dec 6, 2008I just am looking over the CS4/3D methods and am a little bit stumped at this: globalToLocal3D... I am just trying to determine parameters to dynamically resize the width of myMc (once it is pushed back in z dimension - say to 2000) - I am basically using the globalToLocal3D method - yet the compiler is throwing errors - Error #2004: One of the parameters is invalid. here is the code that should be self explanatory (other than the fact that I am doing something wrong)...
[Code]....
ActionScript 2.0 :: Dynamically Resetting Stage Height And Width?
Jun 2, 2011I am trying to load 1280 x 720 frame size swf's into 1004 x 768 frame size files. Can I dynamically reset the stage width to 1004 and height accordingly in proportion. Have tried mc._width and it doesn't work.
View 2 RepliesActionScript 3.0 :: Getting Width From A Loaded SWF?
May 1, 2009I am having an issue with pulling width and height from an external swf.
I can load it ok, and place it ok, but I want to shrink it when I place it and that is where the problem occurs. Here is the abridged code. The odd thing is that if I move the width and height lines inside the function, it works. Trouble is every time you click that tab the swf shrinks a little more.
Code:
//------------------Calling the external SWF and loading it-------------
var myRequest:URLRequest = new URLRequest ("images/filter.swf");
var myLoader:Loader = new Loader();
[Code].....
ActionScript 1/2 :: Dynamically Change Width And Height Of Video Component?
May 29, 2009Already I have one video player and it's width and height are set as 450 and 370 respectively. It's set by statically on its property field. Now I want to change the width and height of video component according to the specified value. Also the control box should be scale accordingly. But when i tried to change the video component's width and height while loading, it's not getting changed.
View 4 RepliesActionScript 3.0 :: Setting Movieclips Width Dynamically Based On Text In It?
May 11, 2010for each (var link:XML in settingsXML.links.link) {
menuItem = new MenuItem();
menuItem.menuLabel.text = link.@name;
[code]......
ActionScript 2.0 :: Dynamically Load JPEGs And Read Their Width/ Height?
Jan 30, 2004I was wondering if there was a way to dynamically load JPEGs and read their width/ height attributes before they actually land on stage. I have tried it once wherein I hide the targetted movie clip and try to utilize the INIT functin to check for initialize. This works pretty good except that a little dynamic animation I need tends to act a little later than it should creating a bug if u proceed immediately.
View 4 RepliesActionScript 2.0 :: Getting Width Of Loaded Movie?
Jun 4, 2009is it possible to get the width of a loaded movie? for example:-
Code:
_root.createEmptyMovieClip("pic", 1);
_root.pic.loadMovieClip("pic.swf");
trace(_root.pic._width);
From the code above, my trace outputs (0), ignoring the width of the loaded pic.swf, has anyone ever encountered this or a way around it?
ActionScript 3.0 :: Get Stage Width Of An Loaded Swf?
Sep 21, 2010Is there any way to get the real stageWidth of an loaded swf? The problem comes when the loaded swf has some elements outside the scene. In this case content.width becomes bigger then the scene. My code looks like this:
[Code]...
ActionScript 2.0 :: Get Loaded Image Width?
Jan 12, 2009I have created some movie clips dynamically using createEmptyMovieClip. Then I am loading images into the clips using the MovieClipLoader. In the onLoadComplete of the loader I am trying to position the clips based on the _width and _height.
I would think that since the clips are loaded as indicated by the OnLoadComplete firing they would have a _width, but it comes up as 0. What gives?
ActionScript 3.0 :: Get Width Of Loaded Image?
Jun 29, 2009I have a simple gallery where I'm loading thumbnails from an XML file.
The thumbnails are loaded into a containing MC (thumbCon), I want to be able to space the thumbs using the width of the thumbs.
How do I capture the width of the loaded thumbs?[code]...
ActionScript 3.0 :: Getting Loaded .swf Width + Height?
Feb 14, 2011Why is this not working?
ActionScript Code:
var ld:Loader = new Loader()
ld.load(new URLRequest("bi.swf"));
trace(ld.width);
addChild(ld);
It loads and is added just fine. But I need to know it's width in order so that I can center it better.It says that the width = 0?and if i do this...
ActionScript Code:
var ld:Loader = new Loader()
ld.load(new URLRequest("bi.swf"));
addChild(ld);
trace(ld.width);
I get the same result that the width is 0?
Actionscript 2.0 :: Loaded Movie Width Not Set?
Feb 15, 2009I am loading several movies into a main movie. I'm using moviecliploader class.loadMovie with a listener object.On LoadInit sets the dimensions and position of the loaded movie.With one of the movies this works fine, but with the other, as soon as I set the width, the movie disappears and on tracing the width following setting it it turns out to be 0.I've just returned to actionscript after a month and I have a memory like a sieve. I'm sure I remember this happening before but I can't remember what I did.
View 1 RepliesActionScript 2.0 :: Get Width Of Image Loaded?
May 15, 2007how do I get the width of an image dynamically loaded using MovieClipLoader's loadClip method? i tried
Code:
listener.onLoadComplete = functon(holder){
variable = holder._width;
}
ActionScript 2.0 :: Width Of A Dynamicly Loaded Jpg?
Feb 12, 2004I'm loading a pic using a config file like:
[AS]
onClipEvent (load) {
loadText = new LoadVars();
[code].....