What's wrong with this code? I'm trying to have audio as external mp3.
Code:
myAudio = new Sound(myAudioMC);
myAudio.loadSound("mix.mp3", isStreaming);
myAudio.setVolume(20);
myAudio.start(0, 999);
If I import an FLV video is there any way to remove the audio, put the audio into a byte array, and then re-add the audio to the flv video?
View 1 RepliesI have a flv file which is in spanish and I want to show the original video but I need to play the audio file which is in english. The length of the video and the audio file is same but I need to mute the audio of the video file and play the external mp3 file instead of it. Also the files will be hosted on a server and so the Streaming should be done for the video and audio simultaneously.
View 2 RepliesBecause flash doesn't loop external mps file correctly, there is always a pause in the loop. The work around is to load the AIFF, or WAV, file into the .fla and let Flash compress the audio file, then the loop works without the pause. The problem with this is that when I have many music loops it takes a long time to publish and test, so in AS 2 I would publish .swfs that compressed the raw audio file and gave the audio file a linkage. Then I would load the .swf into the main .swf and access the loaded .swfs linkage file.
[Code]...
I have a big problem that the audio of the external swf keeps on playing on top of other swf after clicking another button.
I have about 22 external swf files that are called up after clicking on their respective button. However, the audio keeps playing on top of the new swf that is selected. It thought the "removeChild(loader);" would work but it doesn't remove the audio.
I don't know if this may be an issue, but along with every swf that plays there are 3-4 .flv videos that are included in the swf. I have included the code.
import flash.display.MovieClip;
var Xpos:Number = 220;
var Ypos:Number = 105;
var swf:MovieClip;
[Code].....
I have a container swf which is used to load multiple external swfs into a blank movie clip. Done as follows:
blank_mc.addChild(externalSWF);
This works fine, however I've got a weird issue with audio. Some of my external swfs have audio clips in them and for some reason the audio doesn't go away when a new external swf is loaded. So say the user loads a swf with audio in it and the user switches to another page, the audio from the previous page keeps playing even though a new external swf has been loaded into the blank movie clip.
I tried using removeChild before the new external swf gets loaded, but that didn't seem to do the trick. Audio is loaded to the timeline like so:
var audio:Nasdaqbell = new Nasdaqbell();
audio.play();
also tried the audio on the timeline as "stream" and "event" and got the same results.
I managed to use a loader to load an swf that has a video/audio track encapsulated within it. It starts and plays fine. Because of property rights considerations, I must use the provided swf with the video within it rather than converting it to an FLV.
And using the unload command I get the video portion to stop, but not the audio.
I know that I need some kind of audio stop to stop the audio, but haven't been able to figure out exactly how.
The parent swf is pretty simple, no buttons, it just plays 6 external swfs under control of another program that starts it and stops it with no other interaction.
I would like to have an external file (actually, one of several randomly selected files, but I can handle that) play and loop but I have yet to understand how to do the latter. My code works great for playing the file through one time, but when playback completes, it's done. How do I loop the audio? Is there perhaps a listener that can wait for the file to finish playing, then call a function to play the sound again?
View 3 RepliesI have a small flash website where one of the pages has an embed flv video with sound. I need to it unload when the next swf is called through uiLoader. This is the code I am using to call the swfs.
Code:
but1.addEventListener(MouseEvent.CLICK, loadsSWF);
but2.addEventListener(MouseEvent.CLICK, loadsSWF);
[code]......
I have an event listener that is listening for the end of an eternal audio file. I want to move to the next page after an external audio file has completed playing: here is the code I have so far:
ActionScript Code:
d1Channel.addEventListener(Event.SOUND_COMPLETE, soundComplete, false, 0, true);
function soundComplete( e:Event ):void {
gotoAndPlay("next_page");
trace("sound over");
}
This seems to work intermittently. Sometimes it will, and other times it won't. Is there anything wrong with my code or theory. Is there a better way to do this that will yield more consistent results? Or do I need to import any Flash Events?
I have a few animations that run on different scenes each time a scene is loaded the external audio should start with it. Well here is the thing the animation always starts before my audio files and each scene gets bugged. I need to create an action that only allows my scene to start with the audio and also starts loading the next audio so it wont be dellayed.
On the first scene I have the following code:
scene 1 frame 1
var autoPlay:Boolean;
if(!autoPlay){
stop();}
scene 1 frame 2 animation starts and audio 1 loads
import flash.media.Sound;
[Code] .....
loaded an external swf (with audio) in a conteiner swf.
From the cointeiner I want to controll audio pause/resume.
I know the procedure to do this with a mp3 file, but I can't intercept the sound channel of my child swf...
this should be the code to obtain the sound position:
var soundChannel:SoundChannel = new SoundChannel();
var sound:Sound = new Sound(new URLRequest("SOUND.mp3"));
soundChannel = sound.play();
pausePoint = soundChannel.position;
But I haven't the mp3 path.... My mp3 is embedded into swf child. And I can't put actionscript function in child, because is haven't source fla.
This is part of my ongoing issue with 6 video files in six Scenes.I have 6 videos there were imported as enbedded, one in each scene. the first four play but the second two do not.whichever order i place the scenes, it is always the last two that pause at the first frame.o try another approach, I linked instead to a video externally. This seems to work, but, when I click a button to go to another scene the audio from the previous scene is still playing when the new video starts.
View 22 RepliesI have figured out how to load an external video file - and I can play an imported audio file, but I can't seem to use either method to load an external audio file into an array.
Here is my audio code:
var tour_audio:Array = [tour1, tour2];
var my_num:Number= Math.floor(Math.random()*2);
var ChosenSound = tour_audio[my_num];
var playing:Sound = new ChosenSound();
playing.play();
Here is my video code:
var my_videos:Array=new Array ("link1.mp4", " link2.mp4", " link3.mp4", " link4.mp4");
var randomIndex = Math.floor(Math.random()*my_videos.length);
my_player.source = my_videos[randomIndex];
I tried "var tour_audio:Array = ["link1.mp3", "link2.np3"]; - but that did not work.
I need to merge two flv files, using PHP. I can't use exec method. I am wondering if is possible to cut some part of one flv file (audio tag) and paste to another and overwrite duration for output file. [URL]..file-length-using-pure-php but I do not know how can I get an audio tag from a flv file? How many audio tags a flv file has? Which tags should I overwrite in output file to be able to play audio from two merged files?
View 1 RepliesI've designed a website for a client and it's completed but she's complaining that the music on the website is too loud. I made a button so you can turn the sound on and off, but i have no clue how to make a volume button for an external audio clip and i haven't found a single tutorial on the internet that can help me with this specific issue. Can someone help me with this and give me a step by step instruction, including any code i need.
View 1 RepliesI've got a swf which uses AS 3 to load separate audio (mp3) and video (flv) files. The reason they're separate is because the audio is just background music while the video is navigatable. The video kinda goes along with the audio, but it's not imperative that the two sync perfectly. However, the audio always starts playing before enough of the video has loaded to begin streaming.I'm at a loss as to how to get the two to at least START at the same time.
View 14 RepliesI created a Flash program that utilizes audio and text. The audio is located in an external folder and is loaded using .loadSound(). The text is located on the timeline and appears based on a certain time in the audio. I have a pre-loader that looks to ensure all of the external audio is loaded before the user can move onto the appropriate screen and the audio would play. This is using a combination of the .getBytesTotal and .getsBytesLoaded.
It works fine on Windows 7 but doesn't seem to be working one particular user's Windows XP on IE 7 (So it's not happen on all Windows XP). On a particular user's computer, the text is slow to load while the sounds loads pretty quickly leaving the text out of sync. After a few screens, the text will catch up with the audio.
Is there a way to make external streaming audio sound file "mp3" loop. my understanding is that streaming audio won't loop, only works for attached sounds...
var my_sound:Sound = new Sound();
my_sound.loadSound("jazz.mp3", true);
my_sound.start.(0, 99)
This actionscript works but it won't loop..
how to load audio and have it ready for after the preloader. I had it export for actionscript before but it loads before the preloader starts which really elimates much of the need for the preloader. I took off the linkage for it to load for frame 1. I search the forums and saw that a few people recommended following link
[Code]...
I have a project where an external video plays with cue points that trigger the elements on my main timeline (captions). I have a custom mute button for the video so that the guy talking on the video can be muted if necessary (did not use a skin for video controls but set it up as a button). The problem is, when I reach the end of the video and I click a "replay" button to restart at the beginning, the timeline and video start but if the video was muted previously, the video remains muted while my button shows that it isn't. How do I get the audio to turn back on automatically when restarted, or at a minimum show that it's still muted when replaying? My replay button AS2. mcPlayer is my flv.
[Code]...
There may be more than one answer to this, but I'd like to know if there's some technology out there that exists to handle Audio Processing / Playback in realtime, so that Flash can:
Interface with the technology / plugin to generate sounds with no delay or lag. Apply DSP effects (Reverb, Delay, Dynamic Range Compression / Expansion, Distortion, etc). Manipulate DSP parameters in realtime (sweeping an EQ filter's band or Q).
The most important thing of all, would be for this technology to be available to most users, as it would likely be used for Gaming environments or online Audio production, even. So far, Flash has a few ways to manipulate Audio Data, such as the SampleDataEvent, Andre Michelle's Popforge library, chiptune libraries like SiON, and possibly some other unheard of libraries.
I'm not really convinced though, that these methods are the optimal ways to create interactive sounds - sounds that change depending on game conditions, sounds that closely responds to the users actions. Nothing (that I've seen so far) easily allows developers to create or communicate with a DSP effect in order to manipulate the sound in this way, in realtime.
I know that Flash has the ability to communicate over sockets / ports, so perhaps there is an existing library that can communicate with an external plugin, and can be easily distributed to users at the same time.
Is there such an audio solution out there?
I'm building a project that dynamically loads external images and audio into it.The images in the external folder are numbered sequentially in the order they display as you click through them (1.jpg, 2.jpg, 3.jpg, etc). No problem.There is audio that is supposed to fade in a play with certain images. (1.mp3 fades in when 1.jpg is displayed.). No problem.Here's where it gets tricky... At least for me.Not every jpg has an audio file associated with it. The last audio that was triggered needs to keep playing until another jpg with cooresponding audio file plays, at which point the two audio files need to smoothly crossfade.1.jpg displayed => 1.mp3 fades in and plays.
(user clicks)
2.jpg displayed => 1.mp3 crossfades to 2.mp3.
(user clicks)
[code]........
hope i'm explaining this the right way. i'm using the flash flvplayback component to play a video. i've stripped the audio from the flv and am playing it, along with another audio clip, on the timeline at the same time. volume has been set for both clips, but i need to allow people to adjust the volume from the volumeBar that exists inside the video player. it's built in as2.
View 1 RepliesI am curious if there is a way to call back to the main timeline using AS3 after a video clip or audio clip that is being loaded externally, is done playing? For instance: you get to a page with a video on it, but when the video is done playing, instead of just sitting there, it automatically takes you to a new page (framelabel).
View 9 RepliesI have a few external audio clips in MP3 format that I bring in to my SWF by creating different Sound Channels for them. However what I would like to do it when the end of the MP3 file is reached, it will dispatch an event to make the playhead on the main timeline move to a certain frame.
View 2 RepliesI currently have random external swfs of "Buttons" loading and unloading into mc_containers into my main movie. These load and unload every couple of seconds.
What I would like to do is have sounds associated with these.. So if you was to click on one of the buttons, it would play a sound.
I have tried this by placing the sound in the button "down" section. However, it starts to play the audio and then as soon as the SWF unloads to load the next, the audio stops.
My question is: Is there a way that when you click on the external SWF loaded button - that it would then link to an audio file in the "main" timeline/library ? This way the audio would continue playing even though the SWF has unloaded.
I am using CS4 with AS 3.0... I want to implement both a freeware photo flash gallery and mp3 audio player that I found into my all-Flash website. Both of these require reading from an xml file to get their content. They both come with html embedding instructions, but I don't know about actionscript.
View 14 RepliesI ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
Anyone know of a skinnable audio player (or something similar to Windows Vista audio control in task bar) that i can embed in my website?
A player that can be customized to use a 'speaker' icon instead of a 'play' icon. When the speaker is clicked, the volume can be adjusted or turned off. The option of being able to autoplay and set the default volume level.
