ActionScript 2.0 :: How The SetInterval Command Works
Jul 17, 2004how the setInterval command works?i want it so that after you fire a laser from your spaceship, it takes 0.5 seconds to fire another.
View 2 Replies
Similar Posts:
ActionScript 2.0 :: How The SetInterval Command Works?
Jul 17, 2004how the setInterval command works?i want it so that after you fire a laser from your spaceship, it takes 0.5 seconds to fire another.
View 2 RepliesActionScript 3.0 :: Re-setInterval Each Time Function Works?
Mar 19, 2012I have a function that draws a rectangle on the screen (see createInfoPanel())While drawing rectangle, I am adding 2 text fields on it.But as you may guess, it is adding those immediately. I want to delay adding these text fields, then I want to remove these panels after a while. The problem is, when I set an interval or timer, they won't work after I using once (I had to stop them by clearing/removing, it didn't set them again).Since my panel is being created each time image changes, I need them to work every time image changes.
So, I have 2 questions:1- How can I re-set interval each time my createInfoPanel() function works? It won't work anymore after setting and claring once. 2- You can see infoPanel.addChild(titleField); line in addInfoPanel() function. How can I work a smooth animation here? I mean, text appears slowly?
[Code]....
Actionscript 3 :: Flash - Re-setInterval Each Time Function Works?
Mar 19, 2012I have a function that draws a rectangle on the screen (see createInfoPanel())
While drawing rectangle, I am adding 2 text fields on it. But as you may guess, it is adding those immediately. I want to delay adding these text fields, then I want to remove these panels after a while. The problem is, when I set an interval or timer, they won't work after I using once (I had to stop them by clearing/removing, it didn't set them again). Since my panel is being created each time image changes, I need them to work every time image changes. So, I have 2 questions:
1- How can I re-set interval each time my createInfoPanel() function works? It won't work anymore after setting and claring once.
2- You can see infoPanel.addChild(titleField); line in addInfoPanel() function. How can I work a smooth animation here? I mean, text appears slowly?
[Code]...
ActionScript 2.0 :: FMX - Works With The On (release) Command?
Aug 26, 2004I used the great kirupa tutorial for full flash sites. </shameless flattering> When i click my news button it loads, well the news page, duh, but my problem is that my news page is starting to get quite large and i would love it if i could get a little loading animation (which i shall make) while the page was being loaded.Here is the simple actionscript -
on (release) {
_root.contents.loadMovie("news.swf");
}
When i click the button it loads my main page, but when its online i have to wait quite a long time as the file is getting large. What action script do i need to add to have it play a small preloader.swf file while it loads the main news.swf file. I know there are preloader tutorials on kirupa here (they are qutie good ^^) but i need one that works with the on (release) command.
ActionScript 2.0 :: SetInterval In Movieclip Works But Breaks Stop(); Throughout Scenes
Mar 18, 2009I have a series of 6 images. In a single movie clip symbol (with the pictures embedded/attached in the swf), I want the images to fade in, stop for 4 seconds, fade out as the next image fades in, and repeats from there. I know how to do this with timeline tweens - but I wanted to learn how to make it in actionscript.
I've finally been able to make the images do this, but when I pull the movieclip into my main animation, it breaks all my stop(); commands for navigation. it seems to stop for 4 seconds and then continues on. I'm still very much an actionscript beginner, so I don't know how to troubleshoot it.
[Code]...
ActionScript 2.0 :: GetURL Command Only Works On Www And Not Http://
Jun 1, 2010When i open my page like this : www.mypage.com, the buttons work fine, and when i click them, they go to the wanted url...
But if i open my page like this : http://mypage.com, the buttons still play the over animation, but when i click them, nothing happens..
This is my actionscript code :
on (release){
getURL("http://www.mysite.com/link.php", "_self");
}
Flex :: App Fails To Compile With Mxmlc Command-line But Works With Flash Builder IDE
Apr 21, 2011i have this flex app (it's a flex project created from flash builder), and it compiles fine when i build it from the IDE.it fails to compile when i do it from command line through mxmlc.i am invoking the mxmlc at the location "flash-builder-installation"sdks"flex-ver"inthe mxml file is test.mxml.i don't have any dependency on any of custom swc file.i am getting the following type errors when i compile it.[code]
View 2 RepliesFlex :: Command To Pause, Stop And Close Vlc Player From Command Line?
Aug 5, 2010Well i have an adobe air which runs vlc-player at background as service. i check that in Windows Task Manager , the service runs when air application launches.
here is the code
processArgs.push("--extraintf");
processArgs.push("rc"); //Remote control
processArgs.push("--rc-fake-tty"); //Use terminal as output
[code]......
Flex :: Caringorm Calling Multiple Command In One Call (Queue Command)?
Mar 2, 2011I want to call 3 commands one by one , the relation between each commands are command should execute one by one in the previous command result. How to Queue Command's? What is the best practice to handle Queue command , my requirement is adding n number of commands and execute them.Main -> Execute c1c1 got the Result - Execute c2c2 got the Result - Execute c3
View 2 RepliesActionScript 2.0 :: SetInterval - How To Remove A SetInterval?
Jun 14, 2006im looking for how to remove a setInterval. i searched but the answer which was supposed to work dident for me.
[Code]...
ActionScript 3.0 :: Make An "Ignore Command If" Command?
Mar 30, 2012I'm new to Adobe Flash and especially new to Actionscript. Could somebody give an example and explain how to make and "Ignore *this* command if..." style command. Here's what I want to achieve:I have made a button (I may have done it in an odd way but it works) that moves when the mouse hovers over it and then moves back when the mouse moves away. I plan to put the finished product into Dreamweaver and have tried what I've done so far and it works. The problem is that if I move the mouse away before the first animation of the button has finished. It doesn't reach the *Mouse Out* command and then just sticks/stops in the bit where I have put a *stop* command.Basically, what I want is a way to ignore a command if something happens earlier on (such as the cursor being moved away).I've tried to explain the best I can without actually screenshotting it and copying commands.
View 6 RepliesActionScript 3.0 :: Movie Clip ROLL_OVER Only Works Once But MOUSE_OUT Works Infinitely
Apr 11, 2011I have a movie clip (with instance name rectangle_mc) on the stage. Within this movie clip there are two separation animations on the timeline. The ROLL_OVER animation starts on frame "over" and the MOUSE_OUT animation starts on frame "off." If I roll over the movie clip, the initial animation plays, and when I mouse out the other animation plays to restore it to it's initial state. However, once the rollover animation has played once, it will not play again when I roll over it again, but for some reason the MOUSE_OUT plays every time.
[Code]...
ActionScript 2.0 :: Movie Clip With A Stop Command On Frame 1 And A Stop Command On Frame 20
Jul 21, 2007I have a movie clip with a stop command on frame 1 and a stop command on frame 20.I'm trying to have two separate buttons that tell the MC (onRollOver) to play forward or to play backwards.
The actionscript on button #1-
PHP Code:
on(rollOver){ gotoAndPlay(_currentframe +1);}
The actionscript on button #2-
[Code]...
ActionScript 2.0 :: CS3 Use SetInterval?
Sep 19, 2009i use as2 and i want to know how to use setInterval
Code:
var pistolshottime:Number = 1
var counter:Number = 0;
var interval:Number = setInterval(pistolshottimer(),1000);
var pistolshottimer : function(Void){
counter += 1;
[Code]...
pistolshottimer is the period between shots and i just want to know why this doesnt work it says "an identifier is expected after the ':'" and it says after pistolshottimer
ActionScript 2.0 :: How To Use SetInterval
Nov 29, 2004how to use setInterval. I think this is what I need to use to do what I want to do, as shown in the ActionScript (2.0) I've pasted here:
bhold.buttonBlue.onPress = function() {
if (ohpNameRed._y == 0) {
MoveNameDn(ohpNameRed, 60, .3);
//i want a second or so delay before the following code is executed MoveNameUp(ohpNameBlue, 0, .4);
[code]....
ActionScript 2.0 :: Way To Pause SetInterval
Feb 17, 2010Wondering if there's anyway this can be done? Or is there anyway you can return the time elapsed since the last function call?
Reason being that I'm using it in a project that really requires the option to pause the game. So I'd need to "pause" an interval when the game is paused and then resume it from where it was stopped when the game is resumed.
ActionScript 2.0 :: Use SetInterval To Go To A Certain Frame?
Aug 17, 2010I'm in a project where I have to use setInterval to go to a certain frame after a period of time when hovering to some thing in my stage.
The code used is :
setInterval( function() { goToAndPlay(34); }, 100000;
stop();
The problem is that the counter is always engaged will not always go to the frame after exactly 10seconds, it will be random because it never stops counting.
Is there any way to clear the counter after each time I hover to the thing??
Flash CS3 ACS1,2.
ActionScript 1/2 :: Imagescroller When Setinterval Is Used
Jun 22, 2009I am working in an image scroller. Now i need to add a new feature. ie, To pause the scrolling for a specified time after each image scrolled out from the stage. But I have implemented this using a setInterval and clearInterval. But there is an issue occuring in this case. When the image pauses, a gap is occuring between the last image and first image of the scroller. Also when the scrolling continues this gap is also increasing. When the first image scrolled out, it will be again appending with the images scroller. That means it's appending after the last image of the scroller. Thus first and last images comes next to each other. When the scroller pauses, the gap is occuring between the first and last images. Anybody have idea about this.
View 4 RepliesActionScript 2.0 :: SetInterval Not Working In I.E?
Jan 27, 2009I have a flash 9 app that calls a php script that in turn pulls in some variables from txt files. The function within the flash file that calls the php script operates via a setInterval() function. For some reason, this works fine in Firefox and Safari, but in IE the swf fails to update the fugures unless i clear the cache and reload the page..rather than the setInterval() function doing so every 60sec...
View 0 RepliesActionScript 2.0 :: SetInterval For Only One Time?
May 2, 2004seems that my clearInterval is not working i want to make the setInterval only call the function once and stops
here's my code
Code:
createPortfolio = function (portSource, portLength) {
// clearInterval(_root.intervalID);
this.created = false;
[Code].....
ActionScript 2.0 :: Progress Bar For SetInterval?
Nov 30, 2005is it possible to create a progress bar which shows the progress of a setInterval?so if ive used setInterval(foo, 4000); it will "load" up to each function call...
View 7 RepliesActionScript 2.0 :: SetInterval - Get A Two Second Delay
Jan 27, 2006Is it based on framerate or something odd instead? To get a two second delay I have to set it to 1000.
View 2 RepliesActionScript 2.0 :: SetInterval Not Stopping?
Feb 13, 2006I am not sure whats going wrong where but something is because the setInterval continues to run after maxCount has been reached.
Basiclly it's a slide show feature.I am not sure whats going wrong where but something is because the setInterval continues to run after maxCount has been reached.Basiclly it's a slide show feature.
Code:
count = 1;
maxCount = _parent.imgCount;
function loadimg (imgNorm) {[code]....
I think it my coding. I am not to familiar with setInterval.
ActionScript 2.0 :: Using SetInterval Within A Class?
Apr 9, 2006function onLoad(){
trace("Calling SetInterval");
setInterval(this,"resizeImage",1000);
[code].....
ActionScript 2.0 :: Remove A SetInterval From MC?
Jul 26, 2006I have an MC (my_mc) with a button inside (mybtn_btn). Now I make something like this:
ActionScript Code:
my_mc.mybtn_btn.onRollOver = function(){
_root.showBubble();
[code]....
This doesn't work, of course. The bubble is removed, but not the interval. How the heck do I remove that interval?
ActionScript 2.0 :: Can't Get SetInterval To Work
May 10, 2007i am trying to trigger a function after a certain delay, which is why i used setInterval. i can get the function to happen after a certain time, but clearInterval doesnt seem to work it always worked before, when i was not writing it in oop, is there something special with this function when it's used in oop?[code]
View 5 RepliesActionScript 2.0 :: Cant Get The SetInterval To Delay ?
Sep 20, 2007ok what i have is an array that I want to display each image once when the page loads.so I tried the following, in in the init I called the function
[code]...
where the function setIcon tweens to the appropriate i in my array.When i go to publish this it doesn't ever activate the function playSlideShow, i tried activating it directly and it works, but i cant get a delay to it.What I want is for the swf to load, wait two seconds then activate setIcon(2).
ActionScript 2.0 :: SetInterval Isn't Working?
Sep 1, 2008I can't see why this setInterval isn't working ..basically I want it so a new instance of the same image from the library gets placed on stage at various time intervals at a different alpha level each time ... >
Code:
var myInterval:Number;
var number:Number = 1000;[code]............
ActionScript 2.0 :: SetInterval In A For Loop?
May 25, 2009What I'm trying to achieve is that I'm planning to fetch data from an XML file in certain time sequences. For this I would need a simple function that has a growing variable. I tried to test this as a text field that would show my variable go from 0 to 2 with one second between each change - but I can't get it to work.
[Code]...
