When i open my page like this : www.mypage.com, the buttons work fine, and when i click them, they go to the wanted url...
But if i open my page like this : http://mypage.com, the buttons still play the over animation, but when i click them, nothing happens..
This is my actionscript code :
on (release){
getURL("http://www.mysite.com/link.php", "_self");
}
Are there known issues regarding the getURL command in Firefox 3.5?I made a very simple flash movie with some getURL commands and they work in IE7 and IE8 but not in Firefox 3.5.[code]I just tested in Opera (9.24) and it doesn't work either...
View 1 Repliesit is possible of use string on the geturl(); command?
like this:
on (release) {
getURL(main.main2.toString(), _self);
_root.text = search;
}
is there any workaround so that the url will become dynamic? The links is stored in xml file.
ex of the links are :
this.html?gotoframe=#thisframe
that.html?gotoframe=#frame2
Basically the this and that html files contains swf that have alot of frames
.I downloaded this OS X dock template:Url...I got the pictures all changed to what I want, but I can't figure out how to insert the getURL command to make each icon hyperlink to a new webpage.I know it's in ActionScript 2.0, and that the pictures are movie clips.I know things have to be buttons to hyperlink in flash, but will I lose the OS X effect if I make that change?If someone could walk me through setting this up to have hyperlinking icons, that would be fantastic. Using Macromedia Flash Pro 8.Adobe Flash CS3 Pro is also an option.
View 2 RepliesIt is possible of use string on the geturl(); command?[code]...
is there any workaround so that the url will become dynamic? The links is stored in xml file.[code]...
is it possible to use relative paths e.g. ../website/home.html rather than [URL] with the getURL command?
View 1 Repliesi have that header for my navigation here: [url] However I cannot get the getURL command to function properly. You can test it out by clicking on a key meta word (right hand side) than clicking on "home" to take you back.As you will see it does not work.The site is built around Joomla—it's pretty basic and I didn't care for any of the navigational options so I built a flash menu.
edit I can get this to work when I "cmd-return" out of flash and test the .swf - but online it's a no go.
I wasn't quite sure where to put this. I created a banner for a friend in flash using actionscript 2 and the getURL command. When I go to embed it in HTML, the movie shows up and when you hover over it, it appears to link but when clicked it does not link. When I go directly to the .swf file it links, but not when I embed it. Is there anything special I have to add to my HTML to make the link work?
View 2 RepliesI have 2 'getURL' functions on one keyframe, one a text (converted) button, the other an image. They are both next to one-another however only the text (converted) one works. The top bit of code is the text (converted) button:
bt_url.onRelease = function (){
getURL("[URL]","_blank");};
bt_ethicaltrading = function (){
getURL("[URL]","_blank");
};
The code for each is exactly the same, I have checked instance names, tried different url's and even created an invisible button for the image based one. I have also tried putting the buttons on the same layer.
I have flash files on a page which load and play a sound file, then advance via getURL javascript to the next page when the sound file has finished playing (i.e. the movie is non-interactive, maybe this is part of the problem).
On firefox - both PC and Mac - it works just fine. On Mac Safari and Chrome at least is doesn't seem to do anything, but the same javascript works fine when I issue it to the browser manually.
the getURL statement
Code:
getURL("javascript:document.getElementById('NextButton').click();");
1. In the html I have used OBJECT with nested EMBED. With all the browsers that I tested, this worked fine, as did having only the EMBED code
2. I have used the allowScriptAccess parameter correctly in both cases (always), and the swf is hosted on the same subdomain as the survey engine too...
3. I'll check now if a simple alert() is displayed
how the setInterval command works?i want it so that after you fire a laser from your spaceship, it takes 0.5 seconds to fire another.
View 2 RepliesI used the great kirupa tutorial for full flash sites. </shameless flattering> When i click my news button it loads, well the news page, duh, but my problem is that my news page is starting to get quite large and i would love it if i could get a little loading animation (which i shall make) while the page was being loaded.Here is the simple actionscript -
on (release) {
_root.contents.loadMovie("news.swf");
}
When i click the button it loads my main page, but when its online i have to wait quite a long time as the file is getting large. What action script do i need to add to have it play a small preloader.swf file while it loads the main news.swf file. I know there are preloader tutorials on kirupa here (they are qutie good ^^) but i need one that works with the on (release) command.
how the setInterval command works?i want it so that after you fire a laser from your spaceship, it takes 0.5 seconds to fire another.
View 2 Replies:1111/admin/getApps?auser=admin&apswd=mypasswordLists all the apps in defaultVhost but I need to list all apps under a certain vhost how can I do that?Also when trying to load and onload apps for that virual host doesn't work with the main admin user and pass.So when I try to use the user name and password for that vhost I get
<level>error</level><code>NetConnection.Connect.Rejected</code><descri ption>Admin user requires valid username and password.</description><timestamp>Wed 13 Apr 2011 05:09:26 PM EDT</timestamp></result>
[code].....
I have a flash gallery in side my movie I have a next button and a prev button that works just fine. The issue I am having is when you click next and then go back the getURL function no longer works. It might be easier to view the issue. here is the link [URL]
View 1 RepliesI am making rest calls with a urlload.load(urlRquest).
also
urlRequest.method = URLRequestMethod.POST;
urlRequest.contentType = "application/xml";
When I make the calls within the Flash IDE, I get HTTPStatusEvent.status = 400 (or whatever) when an error occurs. And the IOErrorEvent.data contains xml (or sometimes a string).
However, when I run the swf in a browser (Firefox Mac or PC), the HTTPStatusEvent.status = 0, and the IOErrorEvent.data is empty. (Interestingly in Safari Mac, I do get the 400 status, but still no data.)
i have this flex app (it's a flex project created from flash builder), and it compiles fine when i build it from the IDE.it fails to compile when i do it from command line through mxmlc.i am invoking the mxmlc at the location "flash-builder-installation"sdks"flex-ver"inthe mxml file is test.mxml.i don't have any dependency on any of custom swc file.i am getting the following type errors when i compile it.[code]
View 2 Repliesam i publishing the movie incorrectly? It works great when I preview the flash file (cntrl+enter), but after I publish it and insert it into the html (in dreamweaver), the file shows up and animates perfectly, but when clicked, no link... It doesn't do anything
View 3 RepliesWell i have an adobe air which runs vlc-player at background as service. i check that in Windows Task Manager , the service runs when air application launches.
here is the code
processArgs.push("--extraintf");
processArgs.push("rc"); //Remote control
processArgs.push("--rc-fake-tty"); //Use terminal as output
[code]......
I want to call 3 commands one by one , the relation between each commands are command should execute one by one in the previous command result. How to Queue Command's? What is the best practice to handle Queue command , my requirement is adding n number of commands and execute them.Main -> Execute c1c1 got the Result - Execute c2c2 got the Result - Execute c3
View 2 RepliesSo I want to read http streams using flash tcp sockets. I do not really need the http header at all - all I need is body which contains flv. so how to read http response body into byte array using flash sockets?
View 1 Repliesa.swf is loaded in a.html which is hostedI want to know, if user browses[URL]
View 1 RepliesI'm new to Adobe Flash and especially new to Actionscript. Could somebody give an example and explain how to make and "Ignore *this* command if..." style command. Here's what I want to achieve:I have made a button (I may have done it in an odd way but it works) that moves when the mouse hovers over it and then moves back when the mouse moves away. I plan to put the finished product into Dreamweaver and have tried what I've done so far and it works. The problem is that if I move the mouse away before the first animation of the button has finished. It doesn't reach the *Mouse Out* command and then just sticks/stops in the bit where I have put a *stop* command.Basically, what I want is a way to ignore a command if something happens earlier on (such as the cursor being moved away).I've tried to explain the best I can without actually screenshotting it and copying commands.
View 6 RepliesI have a movie clip (with instance name rectangle_mc) on the stage. Within this movie clip there are two separation animations on the timeline. The ROLL_OVER animation starts on frame "over" and the MOUSE_OUT animation starts on frame "off." If I roll over the movie clip, the initial animation plays, and when I mouse out the other animation plays to restore it to it's initial state. However, once the rollover animation has played once, it will not play again when I roll over it again, but for some reason the MOUSE_OUT plays every time.
[Code]...
I have a movie clip with a stop command on frame 1 and a stop command on frame 20.I'm trying to have two separate buttons that tell the MC (onRollOver) to play forward or to play backwards.
The actionscript on button #1-
PHP Code:
on(rollOver){ gotoAndPlay(_currentframe +1);}
The actionscript on button #2-
[Code]...
I've created a 'flashvars' tag in my embed code (aid=test), which I simply wish to add to the end a GetUrl statement, contained in within a button (which is on the first level of the flash movie). This is the code I've added to the button...
on (release) { getURL("http://www.platinumselect.com?id="+aid);}
But this doesnt seem to work!? Is there anything else I need to do?
How i can use the function getURL with quotes? The reason that i need to quotes, is tu put a parameter to another function in Adobe Director.[code]...
View 1 RepliesHow do I use the getURL function in AS3 ?
View 1 RepliesXML test file
<Slides>
<slideNode linkURL="www.cnet.com" jpegURL="images/test1.jpg">test 1</slideNode>
<slideNode linkURL="www.zdnet.com" jpegURL="images/test2.jpg">test 2</slideNode>
<slideNode linkURL="www.pcmag.com" jpegURL="images/test3.jpg">test 3</slideNode>
<slideNode linkURL="www.newegg.com" jpegURL="images/test4.jpg">test 4</slideNode>
</Slides>
In the browser, www.cnet.com, does not work. The value it outputs is: file:///C:/Documents%20and%20Setting...w/www.cnet.com
ActionScript
----------------
slides_xml = new XML();
slides_xml.onLoad = startSlideShow;
slides_xml.load("slides.xml");
slides_xml.ignoreWhite = true;
[code]....
I want 2 open an image in a blank window, when user clicks on the button.I used the following coding to the button:
on (Press) {
getURL("www.domainname.com, "_blank");
}
But the above code is not working , when i click on it.