Actionscript 3 :: URLLoader.load POST - Getting Http Status=0 And No Data. Works In Flash IDE
Jul 13, 2011
I am making rest calls with a urlload.load(urlRquest).
also
urlRequest.method = URLRequestMethod.POST;
urlRequest.contentType = "application/xml";
When I make the calls within the Flash IDE, I get HTTPStatusEvent.status = 400 (or whatever) when an error occurs. And the IOErrorEvent.data contains xml (or sometimes a string).
However, when I run the swf in a browser (Firefox Mac or PC), the HTTPStatusEvent.status = 0, and the IOErrorEvent.data is empty. (Interestingly in Safari Mac, I do get the 400 status, but still no data.)
Code: var myData:URLRequest=new URLRequest("scrip.php"); myData.method=URLRequestMethod.POST; var variables:URLVariables = new URLVariables();
[Code]......
to send data to a script and I want it to go to that page too. Kind of like a if you had a flash login screen that just took a id and it sent you to the next page with that. I can do it with get put I need the id hiden
I'm new to Flex and couldn't figure out yet how to send binary data to the server as the body of a POST request. The HTTPService component doesn't seem to support this. The FileReference doesn't seem to support setting the data via the Flex API.
Im building a reservation form, using actionscript and php. I use sendAndLoad to send variables to php via POST, which returns a different HTTP POST response in case of sucess or not.
Is there anyway to "read" HTTP POST responses with actionscript?
I am trying to get my PHP variables from my load.php document to my flash-document.That all works fine and I am able to get my data down to flash variables inside my function.But, I would like to be able to access this data from outside of this function which gets the data - unfortunately I cant, or.. Don't know how to. I hope that you are able to shed a light upon my problem. So here goes, this is my code:
Code: var myLoader:URLLoader = new URLLoader() myLoader.dataFormat = URLLoaderDataFormat.VARIABLES
I'm working on a sample i found on this site:t captures the webcam & saves the image then posts it to a page.but it seems that i couldn't catch the saved image, im kinda rusty on'm capturing the response in a aspx page and save the image in a file. here's my asp.net code:
if (Request.Files.Count == 0) { Response.Write("ERROR: No files were uploaded");
I have Flash website, and I load data from XML file with urlLoader. If I change data in XML-file, refresh doesn't update data in site. I need to publish it again! How can I make this automatic, that I only need to refresh when data is changed? I can't allways publish when I change somethin in XML-file.
I understand the Flash and AS3 is single-threaded, at least at the user level. I would like to understand how asynchronous data loading is handled by the Flash player.
For instance, if I run CPU-intensive code that runs beyond the normal frame (lets say it runs on ENTER_FRAME, and consumes 1/4 per call). Does this leave any CPU cycles to load data from a URLLoader?
If http loading is truly synchronous, right down to handling the TCP/IP stack, one would get horrible performance. In Windows programming, I can do http access asynchronously (in which case the Windows libraries are doing either input on a separate thread, or doing hardware-level interrupts to handle the data -- I provide an asynchronous callback that may be on its own thread). Or, I can do synchronous download, in which case there will be hardware buffering, but my application is actively waiting for each buffer of data to be delivered by the hardware/OS combination.
URLLoader is asynchronous, but what does that mean? Does it mean that I can run the CPU and still download data? Or, will my download speed slow to a crawl if my Flash application is under heavy CPU load? Understanding how this works will help me design my product better, which both uses a lot of CPU, and downloads a lot of data (to the bandwidth limit of the network, if possible).
1 - SWF must have ability to loading binary data from any domain.
2 - SWF cant load policy XML file from url, cause upload form allows me only to upload swf files, so I cant include any other data. I tried:
Security.allowDomain("*");
But it works only for SWF files.I tried to embed policy XML file:
var dataXML:XML = <?xml version="1.0"?> <!-- http://www.foo.com/crossdomain.xml --> <cross-domain-policy>
[code]....
This will make an security error, if file is from different domain than SWF file.Its possible to get binary data from JavaScript using ExternatInterface in AS3 code.Here is cross-browser library for reading files binary: binary reader and later version jDataView.
I basically have a form inside of Flash that I need to submit to a server-side processing page, which will then return either json or xml telling if it succeeded or not ( json, xml I suppose ). My version of Flash is CS4 and I'm wondering if there are any libraries or frameworks I can use to accomplish this.
i have an air app that i put some updater code into and i keep getting 1 of 2 errors.When i test the app in Flash i get Error ID: 404. Invalid HTTP status code: 404.when i install the application and run it i get Error ID: 2032. Error #2032. the error windows are the windows that are written into the code to come up so i know that part of the code is working. Any ideas or similar experiences?
var appUpdater:ApplicationUpdater = new ApplicationUpdater(); var window:NativeWindow; var windowContent:myWindow = new myWindow();[code].....
We've setup a simple email sending bit of code that communicates with a server script. This is working fine but we're not able to capture the HTTP Status that is being returned by the server! We can see from the server and browser that the status '200' is being returned but for some reason the flash swf isn't picking it up. Is this a security issue?
Code: var EmailVariables:URLVariables = new URLVariables(); var request:URLRequest = new URLRequest(); var loader:URLLoader = new URLLoader(); EmailVariables.name = EnterEmail.Name_txt.text; EmailVariables.email = EnterEmail.EmailAddr_txt.text; [Code] .....
I use flex builder to compile a single class to load an text data from the same domain.it works perfect in IE browser. But something is wrong with the firefox browser.take a look at the following code:
How to retrieve xml data in an aspx page after sending it using URLLoader.load
This is the flash code i am using:
var urlLoader:URLLoader = new URLLoader(); urlLoader.dataFormat = URLLoaderDataFormat.TEXT; //tried by giving VARIABLES also urlLoader.addEventListener(Event.COMPLETE, handleComplete); urlLoader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
[Code]....
I were able to accept data in above statement when i send a string in var1 say "test". But on sending xml above error is getting.I have tried to load the xml data in XMLDocument also.
In AS20 i used sendAndLoad method to send and reterive xml data.
It rarely happened, I use a flash in exe type to access url in local server. It usually success to access the url. When it fail to access the url, open the ie to access the browser. the url works. After using browser, flash success to access the url. The url would return the JSON content. I use URLLoader to load url, and the return error is no responding when it happen.
If the error happen, it would not access the url even restart the computer.
I'm debugging in flash cs5 and I'd like to know if a localTrusted sandbox type swf file can use UrlLoader to connect to http urls? I'm pressing ctrl+enter to compile and run but for some reason I'm getting http 401 error such as the following. [HTTPStatusEvent type="httpStatus" bubbles=false cancelable=false eventPhase=2 status=401 responseURL=null] When I upload the files to my web server and execute, of course this works fine and no errors.Is there a way for me to connect to http urls from within the flash authoring tool using ctrl+enter to compile and run?
I am having a little trouble sending an xml string to an HTTPService an Actionscript3 (see code below). Basically, I am trying to send a georss xml string for conversion into another format. I am getting an ioError and suspect the xml is causing havoc with the services parser. I know this approach is probably not the best, but this is where I am at.
I have form in flash with input text fields with Var field set to t2_2 t3_2 t4_2... what i want to do when user enter values and press buton it should post data(values) to aspx page - how can i do that ? i saw what i did
[Code].....
then i can access t2_2 value on aspx page, so what shoul i put before getURL so it will set values from texboxes
I am using actionscript engine to upload a file, the engine will select the file and send the file over network thru HTTP POST command, the document says the POST message is like:[code]In server side I have a C++ program listens on port 80 and parse the POST message. I only want the file name and file data. How to decode the file data using c++, is it base64 encoded and is there a library can do it for me? I want to decode the binary, and write it to the file.
I'm running FMS 3.5 on RedHat, and have some server side actionscript that is attempting to perform an HTTP GET on a remote URL, e.g:
loadVars.send("http://someurl/");
This works on a Windows XP development server, but not on the RedHat deployment server. Are there any configuration options that I need to be aware of in order to allow my application to perform requests such as these (i.e. HTTP requests to remote servers)?
I've used the Flex HTTPService to connect to a backend blazeDS service without any problems at all. The question I have is, can I also use HTTPService to send a HTTP POST message to a server (with basic authentication)?
Specifically I'd like to be able to interface Flex with Notifo [URL] and to interface with it you just need to send a http POST with authentication and some key:value strings for the message content. (I've done it from java and from the command line with curl and it all seemed pretty easy to set but I'm just not sure how to go about trying this with Flex).
How would this be done via the HTTPService (if at all) ?
Can anyone see how the mxml/as class would look like and what would be in the services-config file and what adapters need to be used etc etc ??
I am sending the parameters from flex application through HTTP POST request to Python/PSP script. I am able to call PSP script from flex app using HTTP POST request, but i am not able to use/retrieve these parameters in Python/PSP
I'm uploading a bunch of base-64 encoded images via an HTTP post. I'm doing this using the URLLoader.load() function. I've added a ProgressEvent, but it only gets fired for the response...after the upload is complete.
i made a class for connection with php-script, which handles sql-requests. it sends requests via URLLoader(), here is simplified code:
Actionscript Code: public class SQLWrapper extends MovieClip{ private var serverUrl:String = "http://192.168.177.128/";private var request:URLRequest; private var
I have been working on this for a few days on the localhost set up, retriving data as varaibles from a php string. There is a output.php file located on the server. [URL]. My Flash code for retriving the code(the swf in embedded into a menu.php file that is in this dir [URL]). var theloader:URLLoader = new URLLoader(); theloader.dataFormat = URLLoaderDataFormat.VARIABLES; theloader.load(new URLRequest("[URL]")); theloader.addEventListener(Event.COMPLETE, turnOn);
There is no error given by Flash, I just does not load. This is what I have tried (as far as the link is concerned) theloader.load(new URLRequest("[URL]")); theloader.load(new URLRequest("[URL]")); theloader.load(new URLRequest("/output.php")); theloader.load(new URLRequest("output.php")); Still is not loading the file.
In my app, I load multiple xml files. And to load those, I always create a new URLLoader. Nothing special. The first file works fine, the second one does, too. The third one, however, reports to have loaded fine, but the data it holds is actually the data of the second file. The current workaround is to load the third file twice, which somehow works... weird.
