I'm uploading a bunch of base-64 encoded images via an HTTP post. I'm doing this using the URLLoader.load() function. I've added a ProgressEvent, but it only gets fired for the response...after the upload is complete.
View 1 RepliesHow can I save image with PHP which was uploaded with http post using FLASH? To upload to i'm PHP using this:
[Code]...
so the question is, how to form a file from that $_FILES variable?
I can get which part of file in bytes is loaded using videoDisplay component for RTMP protocol for VOD, I can get the current playing position using videoDisplay.playheadTime. But I want to know how many seconds of video are already loaded (not the length of bufferTime, which remains constant). i used videoDisplay.bytesLoaded when using RTMP it returns nothing ,if we uses HTTP it displays number of bytes loaded
The loaded size in bytes is not directly proportional to running time of the video, and while using rtmp im unable to get bytesLoaded too, how i can calculated the Video already loaded.
Im building a reservation form, using actionscript and php. I use sendAndLoad to send variables to php via POST, which returns a different HTTP POST response in case of sucess or not.
Is there anyway to "read" HTTP POST responses with actionscript?
I would like to know is there any limitations in flash textarea like the number of lines it can have or the number of bytes it can have. iam opening a text file using php in textarea, where all the contents of the files are not getting loaded in the textarea. If it is there then how to increase its size, is it same thing in flex?
View 1 RepliesI am having a little trouble sending an xml string to an HTTPService an Actionscript3 (see code below). Basically, I am trying to send a georss xml string for conversion into another format. I am getting an ioError and suspect the xml is causing havoc with the services parser. I know this approach is probably not the best, but this is where I am at.
[Code]...
I'm working on a sample i found on this site:
[URL]
it captures the webcam & saves the image then posts it to a page.
but it seems that i couldn't catch the saved image
i'm capturing the response in a aspx page and save the image in a file. here's my asp.net code:
if (Request.Files.Count == 0)
{
Response.Write("ERROR: No files were uploaded");
return;
[Code].....
I am using actionscript engine to upload a file, the engine will select the file and send the file over network thru HTTP POST command, the document says the POST message is like:[code]In server side I have a C++ program listens on port 80 and parse the POST message. I only want the file name and file data. How to decode the file data using c++, is it base64 encoded and is there a library can do it for me? I want to decode the binary, and write it to the file.
View 3 RepliesI'm working on a sample i found on this site:t captures the webcam & saves the image then posts it to a page.but it seems that i couldn't catch the saved image, im kinda rusty on'm capturing the response in a aspx page and save the image in a file. here's my asp.net code:
if (Request.Files.Count == 0)
{
Response.Write("ERROR: No files were uploaded");
[code].....
I'm running FMS 3.5 on RedHat, and have some server side actionscript that is attempting to perform an HTTP GET on a remote URL, e.g:
loadVars.send("http://someurl/");
This works on a Windows XP development server, but not on the RedHat deployment server. Are there any configuration options that I need to be aware of in order to allow my application to perform requests such as these (i.e. HTTP requests to remote servers)?
how to load image and display in flash from http post?
i would to http post some website and return captcha something and display
captcha from response some website from using actionscript flash?
I've used the Flex HTTPService to connect to a backend blazeDS service without any problems at all. The question I have is, can I also use HTTPService to send a HTTP POST message to a server (with basic authentication)?
Specifically I'd like to be able to interface Flex with Notifo [URL] and to interface with it you just need to send a http POST with authentication and some key:value strings for the message content. (I've done it from java and from the command line with curl and it all seemed pretty easy to set but I'm just not sure how to go about trying this with Flex).
How would this be done via the HTTPService (if at all) ?
Can anyone see how the mxml/as class would look like and what would be in the services-config file and what adapters need to be used etc etc ??
I am sending the parameters from flex application through HTTP POST request to Python/PSP script. I am able to call PSP script from flex app using HTTP POST request, but i am not able to use/retrieve these parameters in Python/PSP
View 1 RepliesI'm sure this a common Actionscript method, but my websearch on how to do this is turning up no results.
Using MX 2004 I am trying to get the current value of the web address in which the swf is residing and have actions take place based on the HTTP locations.
ie;
var a:String = this.HTTPaddress;
var b:String = this.HTTPaddress;
(have certain actions take place based on above vars.)
I'm new to Flex and couldn't figure out yet how to send binary data to the server as the body of a POST request. The HTTPService component doesn't seem to support this. The FileReference doesn't seem to support setting the data via the Flex API.
View 4 RepliesHow can I calculate the number of bytes download during RTMP streaming? So that I can keep track of bandwidth usage for particular user? I hope the question is simple enough to understand the requirements.
View 1 Repliesim trying to understand the code and how it works in building a preloader i have seen there are alot of tutorials but im not fully understanding some of it so i thought better if put 1 statement at and the areas i am unclear on
th first part im not clear on is the number of kilbytes in the movie do write it in the varaible as below .....
var numValue = 100;
var getBytesTotal ; //= the movie maybe is that possible
var getBytesLoaded;
// if kilobytes loaded is less than the number of kilobytes in total ////
///move the preloader forward upto NumValue of 100 ;
[Code].....
I am making rest calls with a urlload.load(urlRquest).
also
urlRequest.method = URLRequestMethod.POST;
urlRequest.contentType = "application/xml";
When I make the calls within the Flash IDE, I get HTTPStatusEvent.status = 400 (or whatever) when an error occurs. And the IOErrorEvent.data contains xml (or sometimes a string).
However, when I run the swf in a browser (Firefox Mac or PC), the HTTPStatusEvent.status = 0, and the IOErrorEvent.data is empty. (Interestingly in Safari Mac, I do get the 400 status, but still no data.)
how can I get the bytes loaded and bytes total, from a JPG i'm loading using loadMovie? the point it's making a loadbar
Code:
image.loadMovie("pic.jpg");
i have a project and i need that when a specific variable equals a specific value a random number decreases on the current number, its easy to make it decrease but i need to decrease instead of 4 to decrease a maximun of 5 and minimun of 3.ere is the code :
Code:
numeroDeTazos = 20;
quantidade.text = numeroDeTazos;
if (nrfinal2 == 33)
{
[code]....
I basically have a form inside of Flash that I need to submit to a server-side processing page, which will then return either json or xml telling if it succeeded or not ( json, xml I suppose ). My version of Flash is CS4 and I'm wondering if there are any libraries or frameworks I can use to accomplish this.
View 2 RepliesWhat I'm trying to do is get the total bytes of all the files I want to load and display the percentage loaded of total bytes and bytes loaded of all the files. Its a slideshow so i want all the files loaded and then it will play. I've looked at bulk-loader but it wasn't what I needed. The image are loaded from an xml file. I think I would need to create an Array and then find out the total bytes but I don't know how to reference the loader in the progress.
[Code]....
I have a flash template that I bought and customized with dreamweaver, flash and Coda html editor, the website test PERFECTLY when I test the index.html file, all of the buttons work fine, I have a total of 12 .flv videos and they ALL play back fine, when I play the index.html file, the problem occurs when I upload the files to my godaddy server, 11 of the videos play fine, the whole site is fine, it is one particular .flv file that will not play once it is uploaded to the server. I have changed the orders the video play, renamed the file and changed the html flv path to reflect the name change, I have deleted all the files off my server, refreshed the server logged out and re logged on and uploaded everything again, I have re-encoded the original .mov file to a .flv file again using Adobe media encoder, still nothing, I am wondering why would the index.html play this particular .flv file fine, but once uploaded to the server it will not play, the path is correct I have checked it, if the path were the problem the index.html for that particular file would not play when I test the index.html file before I upload it, but it plays fine until it is uploaded, I am uploading the whole folder on the root, and this particular video file is in a folder with all the rest of the .flv files, I even tried changing the path and putting this particular .flv file in a seperate folder and change the path still nothing.
View 7 RepliesI feel like such an idiot but after trying endlessly I still haven't managed to come up with a way to display the current frame number of nested movie clip ("ecke1") (in a dynamically created text field).The problem really is that I don't know how to have flash keep updating the variable. Here's my latest attempt:
Code:
var frame:int = 0;
addEventListener(Event.ENTER_FRAME,updateframe,false,0,true);
[code]....
Does anyone know an url where I can get the current time as either a string or a number? Or how do I solve the problem that flash can't create an external time? Or does anybody have a
perl-file that they wouldn't mind sharing with me that could do the trick
I need to trace the current level number that I am working on. So say I have 3 swf's loaded onto different levels (_level0, _level1, _level2, _level3), and each has a button, so when I press the button in level1, the number will trace 1, press button in level2, number will be 2, etc.
View 1 RepliesWhat is the actionscript 3 syntax for retrieving the frame number that our object is currently in ?
View 2 RepliesI want to get the current frame and current scene because I want to be able to return to that same exact scene and frame when I click a button that goes to a different scene. When I click a button that says "Exit" I want to go back to the same spot as before.
View 1 RepliesI have a movieclip placed in the main timeline. Inside that movieclip, there is another movieclip.I need to know the current frame number of the inner movieclip when the animation is playing.And report that current frame number back to the actionscript in the main timeline.
View 2 RepliesI have a slider where I check the current value to see if it's within various number ranges. I'm basically running the same comparison over and over for 14 range sets. Is there a way to not have to hard code each one?The snippet below is hard coded 14 times with incrementing boxes[x] values. boxes[x] is a predefined array:
Code:
if (sliderval >= boxes[1].position && sliderval < boxes[2].position) {
//do 1st code
}[code].....