I'm working on a sample i found on this site:
[URL]
it captures the webcam & saves the image then posts it to a page.
but it seems that i couldn't catch the saved image
i'm capturing the response in a aspx page and save the image in a file. here's my asp.net code:
if (Request.Files.Count == 0)
{
Response.Write("ERROR: No files were uploaded");
return;
[Code].....
I'm working on a sample i found on this site:t captures the webcam & saves the image then posts it to a page.but it seems that i couldn't catch the saved image, im kinda rusty on'm capturing the response in a aspx page and save the image in a file. here's my asp.net code:
if (Request.Files.Count == 0)
{
Response.Write("ERROR: No files were uploaded");
[code].....
I basically have a form inside of Flash that I need to submit to a server-side processing page, which will then return either json or xml telling if it succeeded or not ( json, xml I suppose ). My version of Flash is CS4 and I'm wondering if there are any libraries or frameworks I can use to accomplish this.
View 2 RepliesI am using actionscript engine to upload a file, the engine will select the file and send the file over network thru HTTP POST command, the document says the POST message is like:[code]In server side I have a C++ program listens on port 80 and parse the POST message. I only want the file name and file data. How to decode the file data using c++, is it base64 encoded and is there a library can do it for me? I want to decode the binary, and write it to the file.
View 3 RepliesWhen I execute the (2nd) below code with a wrong url (number '1' added at the URL end), I get the below error. How can I catch this error, in case the url is wrong, so that I can give out an error message to the user ?
Error opening URL 'http://localhost/myapp/cgi-bin/savePlanScale.ashx1?NoCache%5FRaumplaner=F7CF6A1E%2D7700%2D8E33%2D4B18%2D004114DEB39F&ScaleString=5%2E3&
[Code]....
Im building a reservation form, using actionscript and php. I use sendAndLoad to send variables to php via POST, which returns a different HTTP POST response in case of sucess or not.
Is there anyway to "read" HTTP POST responses with actionscript?
How can I save image with PHP which was uploaded with http post using FLASH? To upload to i'm PHP using this:
[Code]...
so the question is, how to form a file from that $_FILES variable?
how to load image and display in flash from http post?
i would to http post some website and return captcha something and display
captcha from response some website from using actionscript flash?
I have been trying to upload swf file which was inserted on http page.
I have uploaded http, swf, flash files and scripts but I can only see text on the website.
When I deleted http file and check the website I could open swf file and see the image.
I am making rest calls with a urlload.load(urlRquest).
also
urlRequest.method = URLRequestMethod.POST;
urlRequest.contentType = "application/xml";
When I make the calls within the Flash IDE, I get HTTPStatusEvent.status = 400 (or whatever) when an error occurs. And the IOErrorEvent.data contains xml (or sometimes a string).
However, when I run the swf in a browser (Firefox Mac or PC), the HTTPStatusEvent.status = 0, and the IOErrorEvent.data is empty. (Interestingly in Safari Mac, I do get the 400 status, but still no data.)
I am having a little trouble sending an xml string to an HTTPService an Actionscript3 (see code below). Basically, I am trying to send a georss xml string for conversion into another format. I am getting an ioError and suspect the xml is causing havoc with the services parser. I know this approach is probably not the best, but this is where I am at.
[Code]...
I have uploaded http pages with flash but unable to see it on internet.I had the same problem before but when I reduced the size of flash file, it started show on the net.However, this time it does not work.The files I uploaded were http, flash, swf, scripts.The size of flash is 127kb and swf is 4kb.
View 7 RepliesI'm running FMS 3.5 on RedHat, and have some server side actionscript that is attempting to perform an HTTP GET on a remote URL, e.g:
loadVars.send("http://someurl/");
This works on a Windows XP development server, but not on the RedHat deployment server. Are there any configuration options that I need to be aware of in order to allow my application to perform requests such as these (i.e. HTTP requests to remote servers)?
I've used the Flex HTTPService to connect to a backend blazeDS service without any problems at all. The question I have is, can I also use HTTPService to send a HTTP POST message to a server (with basic authentication)?
Specifically I'd like to be able to interface Flex with Notifo [URL] and to interface with it you just need to send a http POST with authentication and some key:value strings for the message content. (I've done it from java and from the command line with curl and it all seemed pretty easy to set but I'm just not sure how to go about trying this with Flex).
How would this be done via the HTTPService (if at all) ?
Can anyone see how the mxml/as class would look like and what would be in the services-config file and what adapters need to be used etc etc ??
I am sending the parameters from flex application through HTTP POST request to Python/PSP script. I am able to call PSP script from flex app using HTTP POST request, but i am not able to use/retrieve these parameters in Python/PSP
View 1 RepliesI'm uploading a bunch of base-64 encoded images via an HTTP post. I'm doing this using the URLLoader.load() function. I've added a ProgressEvent, but it only gets fired for the response...after the upload is complete.
View 1 RepliesI'm new to Flex and couldn't figure out yet how to send binary data to the server as the body of a POST request. The HTTPService component doesn't seem to support this. The FileReference doesn't seem to support setting the data via the Flex API.
View 4 RepliesIn Flash AS3 i wanna write the single try catch block in order to catch any errors in whole class. For ex, i have a lot of functions in myClass.as. I don'w wanna write in each function try catch blocks in order to catch errors in this function. Is there any methods to do this?
View 2 RepliesI am trying to set up a form in a flash movie that will post the users entry to a php page. I then need the php page to re-direct the user to a page to show a result.
I have the following AS in the flash form. It seems to post to the php page but from within the flash movie. Rather than taking them to the php page, as a non-flash form post would.
on (release) {
loadVariablesNum("search.php", 0, "POST");
}
Is there a way I can get the flash form to post to the php page in the same way a non-flash form would post.
Hope this makes sense! Basically, when the user clicks the submit button, I need the browser to load another php page that gets the user's input via post.
Can someone point me to a simple example of posting to a user's facebook pages using a query string? ie I'm not using facebook connect.
View 1 RepliesI have a rails app that embeds a swf. The swf takes user input and posts to the server. For testing purposes, the controller is just redirecting the browser back to another pagewithout processing the data. Interestingly, after the post, the server log and the firebug log shows what clearly looks like a successful redirect (200) showing the correct URL GET, but the browser does not actually move to the new page and is stuck on the same page with the flash app. Same behavior occurs in both Firefox and Safari.
View 1 Repliesfrom time to time I get feedback from my web portal customers that they cannot see Flash component on the page - instead there's a blank white region. When it happens I instruct them to clear browser cache, and it solves the issue. Is there any way to handle this differently, using HTTP headers etc.
View 1 RepliesIs it possible that I go to an html page , (which contains a flash movie) and let the movie start playing in a certain behaviour according to a parameter passed in the URL?
View 3 RepliesI'm trying to load an xml file from via http into my flash 8 file. Locally it works fine but when on the server it fails. I assume this has to do the flash security sandbox. How do I get around this. I own the servers so is there some sort of fix that I upload to allow the swf to receive the data?
View 1 RepliesI'm trying to write a Flex client that interacts with a Spring-Flex java application. I would like to catch (the flex equivalent of) SecurityExceptions and Display an error page if the user was trying to do something they aren't allowed to dox op up a login box if the user wasn't logged in According to the Spring-Flex docs,
[Code]....
want to make drag and drop and catch page center to stage
View 2 RepliesI have been trying to insert flash file but I keep getting error messages that:
Not Found
The requested URL /annimations/Snow.html was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
I firstly publish flash into both swf and http files. Then, I opened view source of the http file and pasted the code onto the dreamwaever file.
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="[URL]" width="700" height="500" id="Snow" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="false" />
<param name="movie" value="Snow.swf" />
[Code] .....
In addition, I deleted code that swfobject.registerObject(FlashID) on the http file. The dreamweaver gave an error message that the code swfobject.registerObject(FlashID) can cause error when downloading the flash. Finally all http, swf and flash files were uploaded. But I still got the error message above. In the past, I managed to upload flash using the method above, although I did not get any message regarding swfobject.registerObject(FlashID).
how can i play wave file using flash .
I m able to play mp3 files using following code
[URL]
I'm trying to build a workaround for embedding my (downloaded) flash videoplayer. (it's the JWplayer...)
At the moment, when somebody wants to embed the videoplayer they have to include the swf with all the added flashvars (url...). That's messy, and it feels a bit risky... people who know what they are doing can also just remove the plugin and other added data, resolving in me not being able to track pageviews etc.[code]...
Turns out that, when I use file_get_contents on a regular test file, info.php, that responds through a $_GET['var'], the above stated code works, but when I use it on the flashplayer, it doesn't...
As in: the flash file does not seem to be accepting (or responding to) the added header variables...
We have a lot of crossdomain.xml files at my company. Every service that has Flash availability needs one. Keeping them in sync is annoying, so I'd like to be able to have just one crossdomain.xml file hosted somewhere, and then http redirect (302) all the requests to that central location. Is this possible? I can't find documentation anywhere on the web about the rules.
View 1 Replies