url...when you click on DATES it will bring up an event calendar everything works fine but when i click on another nav link like PHOTOS the dates remain visible!this is a serious problem and i cant figure out how to unload whatever operations cause that layer.
View 3 RepliesDon't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 RepliesI am trying to use the same script, an image uploader (that uses PHP), twice to upload two different images into two different scroll panes using two different buttons, while displaying the current action in a text area.I would have thought this could be done by changing the names of the buttons etc and then changing them in the script to match, but I'm not entirely sure how to go about doing this (I am completely new to Flash!)
ActionScript Code:
//Allow this domain
System.security.allowDomain("http localhost/");
[code].......
I've created a application where the viewer could change colours, add text, add logos, rotare them, etc... How do I create a reset button which resets everything to back normal in a specific FRAME? What functions do I have to use?
E.g.
Frame 5 is used to Add colours and text, etc...
Frame 10 is used to Add logos,scale them, rotate them, etc...
I need a reset button in Frame 5 to make only the things which were changed back to normal.
I need for my little project know a way to do following things:
- Getting any character from string (preferably operating on strings like on 1 dimensional arrays)
- Get ASCII code for character
- Convert number which contains ASCII code to character
This is what Have done but will take up a lot of lines
Code:
check.onRollOver = function(){
_root.check.gotoAndStop(2);
};
check2.onRollOver = function(){
[code]....
Let's take the next example:
<mx:State name="sayHello">
<mx:SetProperty name="preText" target="{this}" value="Hello"><mx:SetProperty>
</mx:State>
Can I somehow know when preText property has been set to hello?
[Code]...
If I encode all colors into one single float value (RGB) as:
//Each Channels are from 0 - 255
red << 16 | green << 8 | blue;
How can I retrieve those color channels back in AGAL? There doesn't seem to be any bitwise operators.
I want to pack epoch milliseconds into 6 bytes but i have problem. Let me introduce it:
[Code]...
I'm editing the MotionPath LinePath2D by Greensock to make it become LinePath3D. However I'm stuck in editing this method:
[Code]....
I don't get the operations Greensock does to find the y and x inside the atan2. Why does he multiply xChange (which is a scalar and it should be the delta-x of the Line segment [IMG]) to the b component of the matrix and then sum it to the other thing?
[Code]....
I'm trying to make a calculator to convert radians to degrees. I can do it with radians in decimal form (0.523 instead of PI/6, for example) with no problem. I'd like to do it in the correct way, but I don't know how to make math operations directly in text field nor introducing the PI number.
View 2 RepliesI'm using WebService class with WSDL.How to list available operations in WSDL and their parameters?There is operations property but it's empty.
View 2 RepliesI am currently working with a hierarchical tree structure in AS3/Flex, and want to enable drag and drop capabilities under certain conditions: Only parent/top level nodes can be moved Parent/top level nodes must remain at this level; they can not be moved to child nodes of other parent nodes Using the dragEnter event of the tree, I am able to handle condition 1 easily.
[Code]....
I am working on a project where I need a lot of calculations.I found a really strange and very annoying problem in Flash: If you try to multiply 17.4*32.8 the result is 570.7199999999999 !!! This is just a single example.In this way my application looks buggy sometimes. What's the reason for this wrong result?In my application I don't want to round the numbers .
View 5 RepliesI want the current swf to unload and the new one to load only after a transition occurs. Is there a more efficient way to do this than if. switch()?
View 2 RepliesI am working on a school project that requires me to load external .swf or .jpg files. I currently have all of the buttons working and are loading an external .swf file on to the screen. The problem I am having is that when I go from one button to the next the loaded .swf stays on the screen and the next .swf gets loaded on top of it. I know that I need to unload the file but I am not sure where to put the code for the unload or what code exactly to use. I would like when the button is pressed to unload the previous loaded .swf and load the new .swf without having a separate button to unload.
[Code]...
I am doing some research on creating clcikTags. I read a few places that the clcikTag should be on the top layer. That has been fine, but now I want to loop it and I usually put my actions in the top layer. Will this cause a problem? Am I better off just putting my loop action on the last key frame of the clcikTag layer?
View 3 RepliesIm creating a program that is designed to allow the used to select 3 pictures (movie clips) and print them off on a single peace of paper.
The program works by allowing the user to select 3 graphics (the graphics are actually instructions for various exercises) and then moving the desired movieclips onto the stage. This all happens on a layer named "Content"
So far the program will allow the user to select the movieclips and will move them into place on the Content layer as well as move smaller versions of the pictures into a preview box the only thing it does not do is print. (the most important bit)
Is it possible to create multiple layer masks over a single layer using Actionscript3?Below is the flash effect I wanted to create with masks.First it starts from A and goes to B and C simultaneously.Then from B it goes to H and D simultaneously (the same applies to C).This is how the end result will look like.ps. I need my background to be transparent. I'm embedding it into a web page later.
View 2 RepliesI was wondering whether it would be possible to perform operations on Filters, specifically the DropShadow filter, such as resizing it. Are there any known ways to do it?
View 7 RepliesIs there a direct way how to turn a negative number to positive using bitwise operations in Actionscript 3? I just think I've read somewhere that it is possible and faster than using Math.abs() or multiplying by -1. Or am I wrong and it was a dream after day long learning about bytes and bitwise operations?
What I saw was that bitwise NOT almost does the trick:
// outputs: 449
trace( ~(-450) );
If anyone find this question and is interested - in 5 million iterations ~(x) + 1 is 50% faster than Math.abs(x).
I'm doing a lot of lineTo() operations within a sprite but now I need to draw a line WITHOUT anti-aliasing applied. I assumed it would be easy enough to disable anti-aliasing either for a single draw operation, or in the very least for the entire sprite - but I'm really struggling to work out how to do that.
View 6 RepliesI'm trying to unload an external SWF on _root to load a new one instead. I've tried (almost) everything but can't figure it out... I get this error : "Error #1010: A term is undefined and has no properties."
[Code]....
I can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 RepliesI want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
View 3 RepliesI have a container MovieClip called Drags where I can drag stamps (other MovieClips)--they are added to the Drags container via addChild. I have a second container MovieClip above that one (display order-wise) call Paint that contains a bmp, and some sprites used for adding a layer of paint.
My question is this: I need to be able to click on the Paint layer when I am above a draggable MovieClip and trigger the MouseEvent for the correct object to drag it around, but the item must always remain below the Paint layer.
I'm trying to do a little comic comedy type video in Flash. I've done an outline sketch with the pen tool of my first character, now I want to color it BUT I want to keep the colors and the outline sketch separated on two different layers. Is there a way I can select the path (outline) on layer A and then colorize it with the bucket tool on layer B? The problem I'm having is that every object I select it automatically jumps to that corresponding layer.
One reason why I want to do it this way is I still want to continue working freely on the outline sketch since it's not fully finished, so that I just can blend the colors out and keep working on the outline, at the same time I want to color it while I go just to see where it's going and to make sure that I'm not wasting my time unnecessarily with trying to do a outline just to find out that it won't work out at the end.
how to do a comic type animation, how to create the characters, how to make them move and talk? It can be a free or paid resource.
Why this code doesn`t work?
tip_052.addEventListener(MouseEvent.MOUSE_OVER,ove rSub);function overSub(evtObj:MouseEvent) {
tip_052.visible = true;
else[code]....
appear this error "Scene 1, Layer 'Layer 3', Frame 1, Line 291083: Syntax error: else is unexpected.
this is the END of the code:
this.createEmptyMovieClip("pos", total);
pos.moveTo(radius.b, 0);
pos.beginGradientFill("radial", [0xCCCCCC, 0x999999], [100, 100], [0, 255], {matrixType:"box", x:-radius.b-radius.b/2, y:-radius.b-radius.b/2, w:radius.b*2, h:radius.b*2, r:0});
for (var radians = 0; radians
I get a error for the last line. The error is this:
**Error** Scene=Scene 1, layer=Layer 1, frame=1:Line 11: ';' expected
for (var radians = 0; radians
I cant get it working.. I have flash mx 2004 pro..
Is it possible to add layers, re-order layers, move movieclips from layer to layer or specify which layer a duplicate movieclip appears on at runtime with AS3?I am aware of the depth properties and the functions associated with that but it would be easier to have a concept of a layer because I am dealing with masks.I have a nasty feeling I'm gonna be told that layers don't really exist within an swf and that depths and setmask are all there is to work with.
View 4 Replies