ActionScript 2.0 :: Make Some Movie Clips Function As Buttons To Load Some External Swfs?

May 24, 2009

So I want to make some movie clips function as buttons to load some external swfs. I have this action script on the mc's:

on (release)
{
loadMovie("Chuck.swf", "motionmc");
}

It was working when it was a button, but now nothing happens?

View 2 Replies


Similar Posts:


ActionScript 3.0 :: Load External Swfs Inside A Movie Clips?

Sep 18, 2011

This is my first time working with As3 and im a bit lost, everything is so different from the old good As2... what im trying to achieve is to create a simple virtual tour, i have a map with a few buttons on it that when clicked should lead to a panoramic swf that contains a picture of that particular place in the map. I already have the map and the panoramic swfs. But im clueless as to how to actually put them all together in one document. I tried by using this method but for some reason that loads just the panorama swf and not the picture inside it.

[Code]...

View 0 Replies

ActionScript 2.0 :: Make These Movie Clips Function As Buttons?

Oct 15, 2006

I have this page that has 8 movie clips, and I want to make these movie clips function as buttons. I got that part done already, but what I need now is the Rollover part. I made one separate animated movie clip that'll function as the rollover, so whenever a button is rollovered the animated movieclip will play on top of that button. So my question is how do you designate the one animated rollover movieclip to play on top of each separate button when they are rollovered on? Hope it's not too confusing to understand.

View 3 Replies

ActionScript 2.0 :: "Transitions Between External SWFs" - Using Movie Clips Instead Of Buttons?

Mar 5, 2009

I have just completed the "Transitions Between External SWFs" tutorial and I'm now I'm at the stage of altering a few things in there to suit my needs. But I've run into a problem...For my buttons, intead of "Button" symbols, I want to use "Movie Clip" symbols - reason being is that I've got some specially animated Movie Clip buttons that I wish to use.To get this... err "working"... with my Movie Clip buttons I have needed to use "_root." when referencing to the container Movie Clip. Now that works to an extent, but for some reason each button plays only "red.swf" even when there is no mention of it in the ActionScript and is instructed to play "blue" for example ("red.swf" happens to be the first appearing movie).Normal method with Button - works fine!

Code:
on (release) {
if (_root.currMovie == undefined) {
_root.currMovie = "red";
container.loadMovie("

[code]....

View 2 Replies

ActionScript 3.0 :: Created 5 Buttons To Load 5 Different External Swfs Into Webpage

Jan 23, 2010

I've created 5 buttons to load 5 different external swfs into my webpage. I use the following script. How do I unload it when the next button is been clicked. [code]

View 3 Replies

ActionScript 2.0 :: Unload/Load Movie Clips In Parent Movie From Buttons In Child Movie?

Feb 12, 2009

I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.

View 6 Replies

ActionScript 2.0 :: Buttons Load The External Swfs Except When Click On The Contact Button That Is In The Main Flash Page

Feb 23, 2011

I am loading swfs into a movie clip. However, the contact button is not a loaded swf any longer. It's in the main flash page. This is what I want to do. All the buttons load the external swfs except when I click on the contact button that is in the main flash page. I need to get the other buttons to load after I click the contact flash button. Below is the code for the contact button and the one under for one of the other buttons.

[Code]....

View 3 Replies

ActionScript 3.0 :: Link Buttons To External Movie Clips?

Sep 10, 2009

On one of the pages, i've posted 6 pictures, and make them buttons. And when i click on them, i want to pop up a player with a FLV video clip. FLV video clips that are located on my hard drive and in the root directory of the site. I didn't want to use one of CS3 players, so i have embedded a flvplayer (JW, i think).And, for two days, i search the forums for the AS3 code to make this work, and no luck. And here, i observed that the users get help. Probably it's easy enough for AS3 users, so nobody have problems with this, and for that reason i didn't find posts with this problem. However, if that doesn't work with an external player, i'll do it with whatever player you say.

View 2 Replies

ActionScript 3.0 :: OOP: Multiple Classes - Add Functionality To The Buttons To Load Swfs Into Main Movie

Nov 2, 2009

I had to create a menu using array and I had to animate it. With some great expertise from people, I've accomplished that. But now I have a question about OOP, because I'm trying to add functionality to the buttons to load swfs into my main movie. Even though I strictly follow tutorials and exercises, I can't figure out how to reference a variable made in one class to another. For instance, I have index.as, navbar.as, and menubutton.as. I assume I need to add a loader to my index.as. But I can't trace the loader in my other classes. I've been told to effectively accomplish this, it is best to use custom event dispatchers. But I'm lost on how to use them.

View 12 Replies

ActionScript 2.0 :: Load External Swfs Into The Main Timeline Of Movie?

Oct 14, 2003

im using a load targetscript to load external swfs into the main timeline of my movie, however im keeping much of the other layers/mc's loaded, and the external swf is loading over them, the level the blank movie clip is created in doesnt seem to be working propperlly?? whats going wrong?

bandb.onPress = function() {
_root.createEmptyMovieClip("empty2", 4);
loadMovie("flash/band.swf", "_root.empty2");
container._x = 0;

[Code]...

View 4 Replies

IDE :: Make Some Buttons That Play Different Parts Of Multiple Movie Clips?

Mar 10, 2010

I am trying to make some buttons that play different parts of multiple movie clips- and also link to a url. I also want to be able to click on a movie clip and make it play starting from a certain point (this is what I have been working on) I have this code

stop();
_root.frogdance.stop();
froggy.onRelease = function() {
_root.frogdance.play(4);
}

it is on an actions layer of my main timline- I am not sure if I put it in the wrong place or what- but it doesn't do ANYTHING when I click on it when testing the movie. I gave the frogdance movie clip the instance name 'froggy' in the properties panel. The rest of what I am working with will be buttons that do things- but I also want this movie clip thing to work...

View 1 Replies

ActionScript 2.0 :: Levels - Load External Swfs Into The Main Timeline Of Movie

Oct 14, 2003

im using a load targetscript to load external swfs into the main timeline of my movie, however im keeping much of the other layers/mc's loaded, and the external swf is loading over them, the level the blank movie clip is created in doesnt seem to be working propperlly?? whats going wrong?

[Code]...

View 4 Replies

Professional :: Load Movie Clips From External .swf File?

May 14, 2010

I need to load files from the library of another .swf file (AS3). How to accomplish that?

View 1 Replies

ActionScript 2.0 :: CS3 Buttons In Loaded Swfs Loading Other External Swfs Into The Main Timeline?

Sep 11, 2009

I have a main fla file which loads an external swf into an empty movieclip on the main timeline which works fine but I want a button in the external swf to load another external swf into another empty movie clip on the main timeline.eg. start.swf loads UKEIAMap.swf into (empty movie clip within start.swf) MapLoader_mc then a button havant_b within UKEIAMap.swf needs to load HavantProjectSheet.swf into (empty movie clip within start.swf) ProjectSheetLoader_mc without unloading UKEIAMap.swf

View 3 Replies

ActionScript 3.0 :: Call Load Function On A Loader Two Movie Clips Down?

Oct 6, 2009

Call the load function on a loader two movie clips down?

View 1 Replies

ActionScript 2.0 :: Make Preloaders To Load Scenes Or Just Movie Clips?

Apr 3, 2007

how to make preloaders to load scenes or just movie clips.

View 3 Replies

ActionScript 3.0 :: External Swfs Load - Remove The Swfs And Sound After A New Button Is Clicked

Nov 13, 2010

I am loading eight external swfs by way of eight buttons with actionscript to remove the swfs and sound after a new button is clicked. This works fine except that as soon as you get to the frame where the actionscript is all the swfs load at one time on top of each other. I don't want any to load until the button is clicked for the right one. MouseEvent listener works but only after all the swfs have loaded. How do I get the swfs to load only when the buttons are clicked. I can't figure out what I am doing wrong.

[Code]...

View 5 Replies

Make An Interactive Flash Application That Works By Detecting Mouse Overs And Clicks On Various Buttons/movie Clips?

Oct 10, 2009

I am trying to make an interactive flash application that works by detecting mouse overs and clicks on various buttons/movie clips and then moves to the appropriate part of the time line. But I am having an issue when I use more than one addEventListener in any one frame. I have attached the code for one such frame below. When I comment out the addEventListner and the other code relating to the followBall function this works fine and directs the user to frame Inlet_Valve_Open_Frame but now only the followBall function is working and when i try to click on the Inlet_Valve_Button movie clip nothing happens.

I have never read all the help files on the adobe flash CS3 as i don't have time and i have built this code up based on examples i have found online. I wanted to include my fla file but it's to big 6Mb. But i have attached the swf so you have an idea what i am doing.

Code: Select allstop();
//1.
stage.addEventListener(MouseEvent.MOUSE_MOVE,followBall);

[code]....

View 1 Replies

ActionScript 2.0 :: Function For _root - Control A Movie Clips Current Frame By Another Movie Clips?

Sep 13, 2009

I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:

on(release){
_root.gotoAndStop(1);
}

but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:

on(release){
_*movie_clip_name*.gotoAndStop(1);
}

View 1 Replies

Multiple Movie Clips On Stage - Buttons Not Working In Movie Clips?

Jul 15, 2009

I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.

View 2 Replies

ActionScript 3.0 :: Load External SWF With Movie Clip Buttons?

Oct 2, 2011

Im trying to load an external SWF on to a parent SWF with AS3... When I'm editing the code I get no errors, but when I test the movie I get this error.[code]...

The file I'm trying to load is called PhotoViewer.swf... But that file physically has nothing on the stage all it has is in the publish settings, at the action script settings in document class it says PhotoViewer, a .as file which I have... Its like a gallery and it uses an XML file... I want to be able to switch back and forth between 2 "Photoviewers" loaded by the buttons, only displaying one at a time. So I wonder if this affects the loading of the SWF or my code is just bad...[code]...

View 1 Replies

ActionScript 2.0 :: Preloader - Can't Get Any Of The External Swfs To Load Into The Empty Movie Clip Called "content"

Oct 24, 2003

I went through Claudio's preloader transition tutorial on kirupa ([URL]). I have tried to apply it to my own fla and everything seems to work fine EXCEPT I can't get any of the external swfs to load into the empty movie clip called "content". And yes, I have checked and rechecked to make sure that all MCs have instance names!

View 7 Replies

ActionScript 3.0 :: Loading External Swfs With Button Move Clips

Sep 8, 2009

I have a movie with 5 buttons. The buttons are movie clips with up, over and pressed states. I am trying to load each movie into a movie clip on the stage. All I can get it to do is load 1 movie.I am getting this error.[code]

View 19 Replies

ActionScript 2.0 :: Buttons And Transitions - Load External Swf Files Into An Empty Movie Clip?

Jan 11, 2004

I have a problem with buttons and transitions.I have two buttons onstage (they're inside a movie clip) inside the movie, on the button one I have the following code:

on (release) {
if (_root.externaltwo._currentframe == 7) {
_root.externaltwo.gotoAndPlay(8);[code]....

I have similar code on button two and this does indeed make the buttons move into place as required. My problem is this, I need to load in external swf files into an empty movie clip on the main stage called container. These External SWF files have transitions and this is where my problem is. If I place a normal button on the stage it works but not if the button is inside a movie clip and has actions applied as above. The code next is what I have believe should also be placed on the button to make swf transition one load in.

on (release) {
if (_root.currMovie == undefined) {
_root.currMovie = "externalone";[code].....

Obviously a similar code would be placed on button two so the transitions could take place.I am uploading my file so you can see exactly what I am talking about. Also in this file will be a folder containg a version that works but without the buttons moving up and down which is the effect I wish to have

View 4 Replies

ActionScript 2.0 :: Create A Movie With Buttons That Load External Movies And Works Seamlessly?

Nov 18, 2007

i used kirupa's [URL].. tutorial to create a movie with buttons that load external movies and works seamlessly.

my problem is that i want to do the same thing on the external movies that are loaded so to be able to load new external movies on top of them. it does not work and i know its because of the _root script that gets messed up when a new movie is loaded. it has to become _parent or smthing but i can't seem to be able to make it work..

View 4 Replies

ActionScript 2.0 :: Make Movie Clips Point At Other Movie Clips?

Jan 4, 2009

I'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?

View 5 Replies

ActionScript 2.0 :: Make A Button Load An External Movie And Go Full Screen?

Oct 16, 2009

I've been searching for a way to do this without using html. For some reason i can't have my enter site button load the main movie from the splash page and go full screen at the same time. here is my full screen code: (where do I put my loadMovie script to make both events happen at the same time)

_root.enter_btn.onPress = function(){
if(Stage["displayState"] == "normal"){
Stage["displayState"] = "fullScreen";

[Code].....

View 0 Replies

Using Multiple Movie Clips For Separate Buttons And Mouse Over Buttons?

Nov 24, 2009

I am using Flash CS4 with ActionScript 3 and I am fairly new at it. I am struggling with two things.
 
1. How can I start a movie clip while scrolling over a button? I know how to start a movie clip when a button is clicked.
 
2. How can I use multiple movie clips for seperate buttons?

[URL]

View 3 Replies

ActionScript 3.0 :: External Swfs Load In Different Places On 2nd Load

Oct 19, 2009

I'm loading (and unloading) external swfs into a holder in my main document. However, they seem to load perfectly the first time, but after that, they load at a different x and y. I've seen this happen before in someone else's file, but I'm not sure what the solution is.

This is the bare bones of it:

Code:

sceneHolder.x=0;
sceneHolder.y=0;
addChild(sceneHolder);

[Code].....

View 1 Replies

ActionScript 3.0 :: Load External Swfs Which Load Videos

Apr 11, 2009

Okay so I am trying to load external swfs which load videos dynamically.

I can load the swfs into the parent fla fine (if I remove all the code and just place a circle or something on the stage of the swf), and the swfs are also loading their respective videos correctly. But when I try to load the external swfs, if they contain any casting related code in them, I'm getting an error

[AS]TypeError: Error #1009: Cannot access a property or method of a null object reference.
at swf1_fla::MainTimeline/frame1()[/AS]

Is there some specific method to casting within external swfs?

My code for loading the videos is this:

[AS]var vc:NetConnection = new NetConnection();
vc.connect(null);
var vs:NetStream = new NetStream(vc);

[Code].....

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved