What I want is to do this [URL] in actionscript rather than with tweens...as u can see, it takes EONS too long to load (on some PCs at least) (and I know, it DOES need a preloader (which I have), but I'm going to add that later. I want to get this going first). Now, I read a decent bit about onEnterFrame, and did some tutes, but I'm not quite sure how to use it to do what I want.
View 2 Replies
im using MC Tween [URL] but i have a question how can i use multible tweens? if i do
mc.tween("_x", 10, 1.5);
mc.tween("_y", 10, 2.5);
he goes directly to x 10 an y 10 is there a way that he goes first to x 10 and when he's there he goes to y 10?
i am using the gtween erley beta in my project, and i loved the multiTween class that could take an target array and tween all the targets, but now i updated to the latest release, and now the function seams to be gone?
Some one know if this is coreckt ? And are there an anouther tweening lib out there that can do the same?
I seem to remember reading that you shouldn't do it.I was mad at Flash CS4 and CS5 because I wasn't able to make the animation work like After Effects, as far as animating something, having it rest, and then animating it again. I know you can do this already, however, if you add easing you could mess yourself up as the ease gets applied to the entire tween. I wanted to be able to tween something with an ease, then let it rest, then tween it again, again with an ease.
Tonight I discovered this: Place CTI over last frame of first tween, select object, copy. Go to next "slot" and Insert Blank Keyframe, then Paste in Place the object. Make some more frames. Then after it all make a New Keyframe (content from preceeding keyframe gets copied into it, then add more frames, select them and Make Tween. I now have 2 tweens on the same layer, each with their own easing that can't get stretched out of place.However, when I did this I noticed, before making the second tween, that I was not able to just click the object and Make Tween from there. I had to actually make regular frames and convert them
I have a problem, which I couldn't solve. I made three motion tweens. One is the background, which slides in from left. Another one, is a car, which goes in the scene from right. The two visible wheels of this car are spinning too using a motion tween. The problem is that all these motion tweens keep looping. I would like to let the background and the wheels of the car loop forever, but I want the car to come in from right and stop on the left. When I tried to stop it, it stopped the car, but unfotunately it stopped the background too. How could I manage to let the background and the wheels of the car loop, but stop the car in a position?[URL]
View 6 RepliesI'm trying to mask multiple shape tweens for a slideshow animation I'm working on. (the transition would look just like the main animation on this page url...)
Everything works fine when I'm only masking/tweening one shape. But as soon as I add a few more dquares to the mix everything goes to hell. Can someone tell me the most efficient way to have multiple shapes tweening, while masking an image underneath them?
What I am wanting to do is move multiple MCs when a MC (acting as a button) is released, the following is the code that i have tried but it doesn't want to work:
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;[code]...........
I have a few movie clips in the library. each is created at runtime, placed in an existing movie clip, and given some text (each movie clip has a dynamic text box inside). The header text loads, and then body, and then the enter button. My problem is that the tween for body don't work, yet the tweens for the header and the enter text work. The only difference between the header and the body movie clips, is that the textbox inside, in the body clip is set to multiline.[code]
View 3 RepliesPicture this, for now anyway, as I will be uploading my example when I get home from work. I have five squares all the same size on 5 different layers in slightly different posistions so it looks like a diagonal stack of squares.
I have a button called playHead which I need to act as a counter I will now state the play buttons functions. Once the user presses the play button the first square moves horizontally off of the stage through a coded tween, whilst the square behind it moves into its original position.
I need this function to happen for all of the squares, I would ideally like to use a key listener and the LEFT ARROW instead of a button but I am doing it this way firstly.
The problem is that because I am using multiple tweens and only 1 button everytime I press the play head it trys to trigger the first tween: I feel that I need a counter mechanism that turns off tweens that have already finished and counts through a variable to know which square has been moved. I will upload my progress at 6 tonight GMT.
having a problem with targeting multiple motion tweensin Flash CS4. I am using AS2 and attempting to change thevisibility of eight separate motion tweens (visible false and thentrue). I want to be able to affect each tween separately. I amlooking to activate visibility as follows:
if (triggerclip._currentframe == 2) {
sword._visible=true;
}
[code]....
i'm trying to tween a movie clip, there are multiple, called clipsArray0, 1, 3 etc.. i can pull back the number via creating a listener but when i try and tween this i get an error as the propriety if a String.
How do i get the String name to reference the movieclip with the same name?
clipsArray[i].addEventListener(MouseEvent.ROLL_OVER, makeListener("clipsArray" + i));
function makeListener(name:String):Function{
return function (event:Event):void{
[Code]....
I am trying to target multiple tweens, trying to turn their visibility false/true. I have named each tween in the tween properties box, and I have targeted them like this: plane.plane2.tween1._visible=false (and so on), but no go! Only the first of the seven is actually affected--the others are not.
View 11 RepliesI am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work.This is what I have now because I do not know where to put the other button names without getting errors.
stop();
next_btn .addEventListener(MouseEvent.CLICK, nextImage);
var imageNumber: Number=1;
[code]......
I want to get my movieclip "dial_graphcis_mph" to start at X position 0, move to X position -292.35,move back to X position -220, and then yoyo between -230 and -220.Is it possible to do this without using the TweenTimeline class or similar?I want to keep all the code on the stage with the movieclip if possible...The following code only yoyos between 0 and -292.35.
stop();
import fl.transitions.Tween;import fl.transitions.easing.*;import fl.transitions.TweenEvent;
var tweenMPH = new Tween(dial_graphics_mph, "x", Strong.easeInOut, 0, -292.35, 6, true);
[code]....
I'm looking for some actionscript that will move a clip from one point to another, but in a curve. I've done one that tweens the x and y positions as well as the scaleX and scaleY that sort of does this.
Seems I've seen this sort of thing on YouTube at the end of watching a video. A set of small videos appear, they scale up in size and move to a new position, but they go up, and then down smoothly (thus, a 'curve');
I'm trying to create various tween for various movies, comething like this:
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;[code].....
My problem is how to call a specific tween to stop it, for example: onrollover stop the tween assigned to "barra3" mc for example. I can't use bot_alpha.stop() it doesn't work. I think it's because i have multiple "bot_alpha" tweens, i need something to dynamic create bot_alpha1; bot_alpha2; ... ...
I have a image of a person that I would like to load a certain number of times in a row to show a total of how many people took part in this particular event. In total I need 166 replications of this image, is there any actionscript I can use to do this without having to create a key frame for every separate image?
View 7 RepliesI have this animated block that I want to use multiple times in a scene. Everything looks fine until I move the background(separate layer) with a tween. The second it moves it shows only one animating block instead of 4. Also, if I click on "show this layer only" it only shows the one block.So how can I use this movie clip multiple times?
View 4 RepliesI have an array of suffixes that I'm using to load images, some of which are used multiple times:
Code:
for(i = 0; i < imageSuffixARR.length; i++){
var tempLoader:Loader = new Loader();
var loaderOBJ:Object = new Object();
[Code].....
I'm running into is that whatever loader calls the multiple used SWF last gets it. How do I fix this so that the same loader can be used multiple times?
I have a large image that exceeds the bitmapdata limits, so I am trying to break it up into 4 separate images and encode them separately using the PNGEncoder. The first 1 comes out great. The remaining 3 all contain the same bytearray data and result in a blank image.
Code:
public function encodeUsersDrawing():void{
pngImageQuadrant1 = new BitmapData(1875, 2400, true);
pngImageQuadrant2 = new BitmapData(1875, 2400, true);
pngImageQuadrant3 = new BitmapData(1875, 2400, true);
pngImageQuadrant4 = new BitmapData(1875, 2400, true);
[Code] .....
when I click a button it loads an SWF, then when I click another button it loads another SWF into the same loader. However it appears to be loading multiple SWF's in conjuction with the amount of times I clicked a button. So say if I clicked a button 3 times it would load 4 of the same SWF's on the forth time and load them at the same time.
[Code]...
I have the following code to pick up collision detection between two objects:
[Code]...
Im sure there is a simple way to do this, but it's been driving me nuts for days now.I am trying to loop through all the data in my xml file, thats no problem, however I need to read the data three times for the menu I am building. Is there a simple way to do this? Basically I want to take the first set of results, then add on the second then the third. So I will end up with a list of data three times what is actually contained in the xml doc.
View 2 RepliesI'm creating a movie where I need to have several copies of the same external image.It seems that when viewing the movie in Firefox the external image is downloaded only once regardless of the number of copies I make, which seems correct.In IE the external image is downloaded once each time I copy it within the movie.And that just doesn't seem right.(I've upgraded both IE and FF to Flash Player 10.)For testing purposes I've written the following code
Code:
var pages = new Array();
pages[0] = "images/Page_01.jpg";
[code].....
i want to have multiple blocks moving over my stage, but i want use just the one mc in the libary and my function, what adds a new block with random color, alpha and speed.I think, that i have to use addChild();, but i have no idea how to use it properly.
Attachments:
block.zip (7.1 K)
Is there a way to make an item, which can be draged onto the stage mulitple times? Like in making beats in music apps. You select a sample and drag it into the stage.
View 1 RepliesI'm having trouble with sound in Flash. I may have went about coding the wrong way, because most of my codes are on frames.
So, I have these two variables
var outsideDay:Sound = new daysong();
var outsideNight:Sound = new nightsong();
And I want to play these songs on a specific frame. However, the sounds play sporadically, like 50 times at once. I think it's because I have other codes that link to the frames with a Enter_Frame function. How can I get the sounds to loop and not play multiple times at once?
i want to reuse an image multiple times within an item renderer, is it possible to embed the image and then reuse multiple times without having to go back to the server for the image? Is this the most performant solution?
View 1 RepliesThis code is for my login component. I want to get a special string for encrypting my password. This string is given by my authservice. But when i login i get a multiple times a alert with Done(line 69 in the pastebin code or line 4 in the code on the bottom of this question). But i want that it shows one single time. Does someone know what is wrong with this code?
protected function tryLogin():void {
encryptStringResult.addEventListener('result', function(event:ResultEvent):void {
var encryptString:String = event.result.toString();
[code].....
The following code works in the following way:
When I enter incorrect values in the txtother.textbox and focuses out, an alert will be displayed as "Please enter a valid Format Mask." . After pressing the "ok" button in the Alertbox the txtOther.focusout even is triggered again. i.e. immediately after pressing the OK of alert, the same ALERT is displayed again.
I have added the code for ur reference:
//in mxml File:
<mx:Canvas label="General" >
<mx:VBox>
[Code].....
I don't want to the alert to come again and again .. I need it in such a way that when the ok button of alert is pressed. The txtother.text should be in focus, and the alert should not come again and again as before.
