ActionScript 2.0 :: Put A Image Instead Of Output="true"?
Apr 22, 2011Code:
on(release){
if(onetext.text==""){
[code].....
Similar Posts:
ActionScript 3.0 :: Image Smoothing = True When Mouse Is Over The Image?
Apr 14, 2009Is there a way have smoothing = true on an image on the stage that isn't dynamically added.I know about "allow smoothing" .What I want to do is have the image smoothing = true when mouse is over the image so a tween event can occur. The reason I want to do it like this is because I don't like it when "allow smoothing'is ticked the image is blurred.
View 1 RepliesActionScript 3.0 :: ButtonMode = True; .useHandCursor = True; Only Works On Half Of The Button?
Sep 4, 2009about.buttonMode = true;
about.useHandCursor = true;
I have this on a MC I use for a button - and it works but only on HALF of the object - how can I make so it works on the whole object itself?
ActionScript 2.0 :: If Condition - (condition1=true) AND (condition2=true)?
Jun 11, 2004I know how to do this in other codes, but..if (condition1=true) AND (condition2=true) then... How do you do this in AS?
View 5 RepliesTrue-to-aspect - Full-browser Scaling Image Background?
Apr 12, 2010I have been trying to work out how the full-browser background was done here: [URL] It scales in a very elegant way: it never stretches the image, stays centered on the image and never causes ugly blank areas around the image. For me, it's become deceptively difficult to achieve! :-(
View 1 RepliesActionScript 2.0 :: [Flash 8] - Output Image File?
Feb 6, 2008using .lineTo(x,y) and .moveTo(x,y) i have created an image and i would like to save that image as a separate .bmp or .gif or .jpeg (format is not really important). Is there some way that i could acheive this? and would it involve calculating the color of every pixel?
View 1 RepliesActionScript 3.0 :: Trace Doesn't Output Anything In The Output Window Anymore?
Nov 20, 2009I'm quite new to AS3 (coming from php/c#) and like it very much. My problem: trace doesn't output anything in the Output window anymore?!
View 2 RepliesActionScript 3.0 :: Trace Doesn't Output Anything In Output Window Anymore
Nov 20, 2009I'm quite new to AS3 (coming from php/c#) and like it very much.My problem: trace doesn't output anything in the Output window anymore?!
View 3 RepliesActionScript 2.0 :: Read "true" As True?
Nov 18, 2003I am pulling the words "true" and "false" from a query, but in flash I need them to be the values of true and false, not strings, is there a way to convert this datatype?
View 3 RepliesProfessional :: Export An Image From Flash, The Output Color Not Same As Original From Flash
Nov 5, 2010i try to create my logo from flash
i use export function in gif format.
the output color is not same as what i saw at flash.
may i know why? below is the screenshot.
flash
output
ActionScript 3.0 :: Selectedcolor, True To The Text True Or False In The False Print Text?
Aug 28, 2010Selectedcolor, true to the text true or false is false text into print.colorPicker component in, I select Export to a selected color, the color value myMC texte into summer, but accuracy can not control.
var myColorPicker:ColorPicker = new ColorPicker();myColorPicker.editable = false;myColorPicker.visible = false;myMC.visible= false;myColorPicker.addEventListener(MouseEvent.CLICK, clickHandler);myColorPicker.addEventListener(ColorPickerEvent.CHANGE, changeHandler);[code].........
ActionScript 2.0 :: Link Input Text To A Variable And Output That Text To The Output Window Using Trace
Jul 22, 2005I'm teaching myself ActionScript and the book I'm reading just got into input text capabilities. The book shows me how to link input text to a variable and output that text to the output window using trace. My question is: how can I display the text that the user input onto the actual movie. For example... if I wanted the visitor to type their name into the input text box and click Submit and then a phrase shows up with their name such as "Hold on Name, my site will be done soon." How do I reference that variable and have it actually display in my movie?
View 5 RepliesData Integration :: Php Data Correct On HTML Output But Output To Flash Is Incorrect?
Jun 22, 2006var nextY = 0;
var nextY2 = 18;
for (var count = 0; count < result_lv.typeCount; count++)
{
[code]....
The type count is correct but the information for the project is wrong.
ActionScript 3.0 :: Set The Caption To True?
Aug 7, 2009I can set captioning to true in component inspector; is there any other way that we can set the caption to true?
View 1 RepliesFlex :: Get A True MouseOver?
May 20, 2010so mouseOver and RollOver, and their respective outs work great as long as your mouse is actually over the item, or one of it's children. My problem is that I may have another UI component "between" my mouse and the item I want to process the mouse/rollover(maybe a button that is on top of a canvas, but is not a child of the canvas). The mouse is still over the component, there's just something else that it's over at the same time.
Here is a simplified code example detailing my question copy/paste that into your flex/flash builder and you'll see what I mean:Edit, I just made this more complicated and true to my actual problem, drag slowly, if you move your mouse further than the button in a single frame it kinda breaks, but that is just in this simplified version
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" width="500" height="268"
[code]....
ActionScript 2.0 :: If Else Always Returning A 'true' Value?
Mar 7, 2010I am makign something which generates a random number, then proceeds to check it against a range of fields loaded from an XML file. I have checked and the fields are loading the correct numbers in, but the "if" statement is always returning 'true'. The only time I have been able to get it to properly execute is when I use numbers instead of variables. I have tried using Number(variable), but that doesn't seem to fix anything. here is my code.
ActionScript Code:
on (release) {
_root.colnum = Math.round(Math.random()*100);
if ((_root.colnum<=_root.wballmax) && (_root.colnum>=_root.wballmin)) {
[Code]....
ActionScript 2.0 :: Flash 8 - How To Get True Fullscreen
Apr 4, 2009I m designing a webpage in flash. Actually I am looking for fullscreen for my webpage. I know some methods to do it, but with that, the position of the page contain not changes as per browser window's size. I have used below code, but what i want exactly for that see this website: [URL].
The code that I used is below.
Stage.align = "TL";
Stage.scaleMode = "noScale";
function modoFullScreen() {
Stage["displayState"] = "fullScreen";
} function modoNormal() {
Stage["displayState"] = "normal";
[Code] .....
Mc.visible = True Button Not Working?
Jan 2, 2010I'm using Flash Cs4 with As3 to make a project. In part of it I have an object which is invisible, but when a button is pressed is made visible. Only problem is, it won't make it visible.
Heres my code
PHP Code:
import flash.events.Event;import flash.events.MouseEvent;aSettings.visible = falsevar setVisible:Boolean = false;buttonVisibility.addEventListener(MouseEvent.MOUSE_DOWN,function():void
[Code]....
I'm not receiving any errors at all, but whenever I click the button the output says "false", so I know that its not changing it to true.
Visible Property Does Not Work For True
Apr 17, 2011I have a clip which is basically a set of button clips. When a button is clicked it fades (i used the ._alpha property) and finally when its 0 alpha, it removes itself (by using _visible=0 property). It works perfectly. Now when another button is clicked. I wanted the button which is currently not visible to restore its visibility. But using _visible=1; just isnt doing it (pastbutton._visible=1;). I tried a lot of trouble shooting, trace shows that the correct button path of the last invisible button is stored in pastbutton. But still when the next line says pastbutton._visible=1 still it doesn't restore the target button which is stored in the pastbutton variable.
View 1 RepliesButton Pressed True Or False?
Nov 4, 2009Basically what i have is three buttons which can be pressed in a maximum of 7 different combinations. Each of these buttons has a movieclip underneath that advances to the next frame when the button is pressed. Each clip has two frames with actions, frame 1 has:
stop();
var option1:Boolean = false;
and then frame 2 has:
stop();
var option1:Boolean = true;
So when you press a button you have true, and false when the button is pushed again.
i already have a constant loop between frames 2 and 4. At frame 4 i think i need to have some code that detects which state the 3 boolean statements are in and then load a movie depending on which statements are true and which are false.
ActionScript 2.0 :: Possible To Set Vars Like True And False In XML?
Apr 25, 2007I never get the hang of these.'
Code:
_global.web_link_activate = (wArray[this.id]);
if (_global.web_link_active == "no"){
_root.load_area.zoomer.enabled = false;
_root.load_area.zoomer._alpha = 20;
[Code] .....
That should work but it does not. it always says "yes" wArray is a drawn from an xml document.
XML is
Code:
weblink="yes"
Can I set vars like true and false in xml kinda like weblink=false??
ActionScript 3.0 :: HitTestPoint( X, Y, True); Implementation?
Jun 2, 2009Testing this function and running it 11k times on a shape where I use:
shape.opaqueBackground = true; shape.cacheAsBitmap = true;
Is extremely slow.. It seems to take 4 to 5 seconds to check a 101 x 101 tectangular area.I'm wondering how it is implemented...I know the code for the SDK is available?I can 'getPixel' from a bitmap to get the very exact color of that pixel in 1/1000 that time.If I happen to have the bitmap data.But with a shape that is already 'treated as a bitmap' (see above) using hitTestPoint can stop your system. It should not be vastly inferior to work with Shapes than it is with bmp data..
ActionScript 3.0 :: If Button == True Not Working?
Jan 11, 2010I'm making a flashmovie using AS 3.0 and I have all my button inside a movieclip. (Scene of 1 frame with a movieclip, everything inside the movieclip).
Now, I set a button to false and I want it so that if you click on it, it becomes true. Then, another button(arrow) will do something depending on whether or not it's false or true.
My code looks like this:
stop();
var button_btn = false;
button.addEventListener(MouseEvent.CLICK.buttonCli ck);
function buttonClick(event:MouseEvent) {
[code]....
Now it appears to me that the button doesn't go to true at all...
ActionScript 3.0 :: Testing For XML Items To Be True?
May 27, 2010I have an XML file and in the file there is a node called <content>. This content can have one of two child nodes <flashID> or <loadUrl>. I have a function called videoList. Here I am using a switch case statement. Where I am running into problems is trying to determine which menu item <categoryName> has a video and play it.
In my videoList, case "Our Work" does not have any video urls associated with it. Yet when I click on this button in my clipClick function, the menu, it plays a video. How do I write my clipClick function or videoList function to check for when the <loadUrl> is present in the <content>.
Code:
//put button names from XML into an array
var categoryNames:Array;
//create menu
[Code].....
ActionScript 3.0 :: HitTestObject Always Returning True?
Jun 1, 2010I'm having some trouble with an Asteroids game I'm making as a first game. The issue I'm having is that I'm trying to do hit detection using a for loop that runs hitTestObject against every item in an array, but every time it runs it returns true no matter where the ship or the asteroid are on the stage.Here is my code:
Code:
function setup() {
stage.addEventListener(KeyboardEvent.KEY_DOWN, keypress);
[code].....
ActionScript 3.0 :: LoaderMax, Can't Add ButtonMode True?
May 20, 2011I don't know how to add buttonMode true in my gallery and somehow it doesn't loop for all the images in XML. it starts not from first image, it starts from secondI used a snorklTV tutorial (Bullet-Proof TimelineMax Transitions) for my gallery animation.Code is in class "main"
Code:
package
{import com.greensock.events.LoaderEvent;
[code]......
ActionScript 2.0 :: Set The EmbedFonts Property To True?
Jan 3, 2004How do you set the embedFonts property to true with actionScript? I am trying to have a font embedded (font symbol?) and I do not know how to set it with teh embed fonts property so it shows up in the .swf file.
View 2 RepliesActionScript 2.0 :: Set The True And False Statements?
Apr 5, 2005I have this code on a movie clip:
Code:
onClipEvent (enterFrame) {
this.gotoAndStop ()
if (Key.isDown(Key.DOWN)) {
this.gotoAndPlay ()
}
}
But the problem is, when I let go of the arrow key, the movie keeps on playing. How could I make this work, so that the movie clip would go to the first frame when you let go of the arrow key?
Because this code didn't work:
Code:
onClipEvent (enterFrame) {
this.gotoAndStop ()
if (Key.isDown(Key.DOWN)) {
[code]....
I just don't know how to set the true and false statements.
ActionScript 3.0 :: DOUBLE_CLICK Doesn't Work (it Is Set To True)
Feb 23, 2009I don't know why but this function will not work with double click I want a double click button on frame 2 to go to frame 1.The function works fine if it is a mouseClick event but double click prevents it from working. what is with that?
PHP Code:
table_mc.back_btn.addEventListener(MouseEvent.DOUBLE_CLICK, mainMenu);
table_mc.back_btn.doubleClickEnabled = true;
function mainMenu(event:MouseEvent):void {
gotoAndStop(1);
elementType_txt.text ="";
}
Add The Parameters ,true And ,false To The Stage Event?
Mar 5, 2010I am having a problem with stage event listeners in Explorer 7 and up.I place an object, say a circle, on the stage in layer 1. I make it a symbol and give it an instant name of myBall_mc.I add a blank keyframe at frame 25 and create a motion tween moving the circle across the stage.I add a new layer, name it actions and place the following code in the first frame.
stop();
stage.addEventListener(MouseEvent.CLICK, onClick);
function onClick():void[code].....
Works perfectly when testing. Works perfectly when exported to a .swf in Firefox. Doesn't work at all in Explorer 7 and up.If I add a button to the stage and change the event listener to listen for a mouse click on the button, it works perfectly in all browsers.
Now here's the weird part. If I leave the script exactly like I have it above and place a box, the entire size of the stage, over the stage and set its alpha to zero. It works perfectly in all browsers. This is without even changing the event listener from stage to whatever I called the stage covering object.It registers as a stage level mouse click!
I've tried to add imports but this didn't change anything. I tried to add the parameters ,true and ,false to the stage event listener after the function name. Everthting I've tried comes up short. The only thing that works for Explorer browsers is covering the stage with an object.