I am new to flash programming. I have to create a flash card game for a client.There are 52 cards with back showing in 52 rectangles. Each time the swf loads the position of the cards has to be different (randomly placed) in those 52 rectangles. Click on the card and the face of the card shows. Also an option for shuffle. When the user clicks on shuffle, the cards are randomly placed.
View 1 RepliesMy goal is to get a single stroke to animate randomly every time I open the animation. My code seems to be creating a new strokes during the animation causing them to stack on top of each other. This animation would work if only the previous stroke did not multiply.
[Code]...
I am trying to select and highlight a specific row on the datagrid in an embedded swf everytime the movie loads. I am using flash cs3 and actionscript 3 , published on flash player 9. anyone done anything similar? Did quite a bit of searching none of the methods actuall seemed to work.
View 1 RepliesI'm trying to place my mc's at a different position each time the game starts but within a certain area. I've used random before...
random(300);
...but I want it to be randomly between the coords
_x 150 and 450
_y 250 and 350
I want to attach a mc from the library, then duplicate it 2-3 times, and have the duplicates start in random _x / _y locations on the stage. They then slowly drift across stage.The code I've got so far loads the mc from the library, duplicates it once, and places it randomly. But it only creates one duplicate instead of 2 or 3. And I suspect it could be simplified.So I need corrected code to create 2 or 3 duplicates, and have them start randomly and move at the same speed across stage. Maybe advice on how to allow them to move at different speeds would be useful as well.[code]
View 2 RepliesI want to load some mcs randomly on the stage, except for a footer area at the bottom of the stage. Is there a way to exclude just a certain part of the stage using something like Math.random()*Stage and then specifying the bottom 300 pixels as off limits?
I'm using the whole stage because the swf is embedded 100% across the browser, so I can't restrict the dimensions.
Code:
onClipEvent (load) {
x = this._x=Math.random()*Stage.width;
y = this._y=Math.random()*Stage.height;
}
I have a flash file which loads an XML file containing links to my photos.var listLoader:URLLoader = new URLLoader( new URLRequest("filelist.xml") );When I test out the Flash movie through Flash, there are no problems.When I place it in my index file, the XML file no longer loads. (just the swf)When I place the XML file in the same directory and the XML and swf files, it loads the images.[code]I've also changed the url in actionscript to:var listLoader:URLLoader = new URLLoader( new URLRequest("mediaflashfilelist.xml") );
View 1 Replieshow could I randomly place x number of rectangles on stage so that they dont overlap?
not tween, just place?
I am trying to figure out how to randomly place four cards on stage through external AS3, by arrays.For example:
Code:
var positionArray:Array = ["48.50", "125.50", "202.50", "280.50"];
function getXAxis():String
[code]......
Is there anyway to randomly place a MovieClip/Sprite on an irregularly shaped object?For a rectangle, it seems pretty straightforward (i.e. use Math.random with the range being the coordinates of an object)...but what if say, you would like to avoid placing objects in the center?
View 2 RepliesI am trying to make what I thought would be a very simple random picture display. I have five movie clips named myClip1, myClip2, etc. All are on the first frame of the timeline. Each has this as a movie clip action:
Code:
onClipEvent(load){
_alpha = 0;
}
The frame also has an action like this:
Code:
nClipMax = 5;
// nClipMax being the number of movie clips
this["myClip" + Math.ceil(Math.random()*nClipMax)]._alpha = 100;
When I test this the background (an image) displays but nothing else, the movie clips stay transparent. I have tried several variations without any luck.I am mainly an asp and net developer that uses flash periodically so be gentle.
I'm currently working on a site where the background pictures (wallpapers) loads randomly with xlm.Loading of the pictures working properly until I try to put the AS: (stageResize/stageListener) it doesn't load.I have tried numerous things but it's still not working.
I've used the following script:
Code:
Stage.scaleMode = "noScale";
Stage.align = "TL";
stageResize = function () {[code]...........
I have four dynamic text field created at the authoring time in Frame-4. I just need them to be placed randomly every time when I come from Frame3. I have known that there is a Math Class which generates random numbers which would be an effective way. how do I proceed ahead i.e shall I create an array and seed it with the their current positions etc etc
View 5 RepliesSo the following code is Lee's implementation of a preloader which works fine first load but goes crazy when the browser loads a cached file, jumping from 0% to 100% randomly Things I have tried to no avail: switching off gzip compression, tho I dont think it is on Using ENTER_FRAME instead of progress and complete
[Code]...
I'm trying to fade in and out some movie clips using the Tween class, but am having problems. I have the following code which fades in my movie clips:
Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
// Fade in and out
var myTween1:Tween = new Tween(wds_mt, "alpha", Regular.easeIn, 0, 0.5, 100, false);
var myTween2:Tween = new Tween(wds_sf, "alpha", Regular.easeIn, 0, 0.5, 150, false);
var myTween3:Tween = new Tween(wds_hush, "alpha", Regular.easeIn, 0, 0.5, 120, false);
var myTween4:Tween = new Tween(wds_10, "alpha", Regular.easeIn, 0, 0.5, 300, false);
var myTween5:Tween = new Tween(wds_uf, "alpha", Regular.easeIn, 0, 0.5, 210, false);
However, I need to fade them out and then loop the fade in-out animation forever.
I had an idea I would like to incorporate into my site, and sure that Flash can accomodate, but what better place to check!? Say I have a mc_1, mc_2, mc_3, mc_4, and mc_5 all are basically the same information, just varied lead in animations. Is there a code that I can call to randomly choose among those when the site is loaded? Pretty vague I know, but right now I am adding them via "addChild," so would there be something I could use to accomplish this?
View 3 RepliesI have a slider on my stage that returns a number between 0 - 300 depending on where the user moves the slide.What I would like to do is add and remove movieclips as the user slides the slider so that the number of movieclips on the stage is proportional to the slider's value.An example: If the slider value is 300, I want 300 circles on the stage. As the slider moves down to zero, the number of circles on the stage decrease.I've been trying to think of the best way to do this. Should I use addChild and removeChild? Or just change the visibility?And what would be the best way to refer to each movieclip? Should I use an array? Or maybe an if/else statement?
View 4 RepliesI'm working with a randomly moving MC, and now it looks good except the collisions with the level. When it hits the level it gonna rotate and go another way. I don't want it go through the walls.
PHP Code:
onClipEvent (load) {
xx = -(Math.cos(this.ro._rotation*(Math.PI/180)))*speed;
yy = -(Math.sin(this.ro._rotation*(Math.PI/180)))*speed;
this.ro._rotation = random(360); radie = 9;
[Code] .....
I posted this in the Flash 8 forum, but wonder if I'll have better luck in here. I need to get movie clips to play randomly. Currently, I have actionscript on Frame 1, and a movie clips on the stage in Frame 2. Also in each movie clip as the last frame I have "PlayMC();".[code]
View 1 RepliesThe player controls the character with their mouse - it follows their cursor. I'm trying to make an environment continually scroll from the right hand side of the screen to the left - much like in Canabalt (click to see). I've been trying to do this with tweens, but it doesn't seem like it's going to be the most efficient way of doing it... Plus Flash keeps dying on me whenever I try to do it.
I have a couple of background images, and then I have objects in the foreground that the player is going to destroy by mousing the character over them. How do I get Actionscript 3 to place instances of movieclips on the screen at certain points, and make them to scroll from the right of the screen to the left? I have a lot of different movieclips to use, so it'd also be great if they could be removed from the stage once they reach a certain point.
I am generating movieClips outside of the stage I want to send them randomly into the stage in enter frame. Currently it looks like this, so they go like in all directions... How could I direct each of them randomly into the stage?
Code:
function timerEvent(e:TimerEvent):void {
var newObj:MyObj=new MyObj();
//this places them randomly outside of the stage
[Code].....
I can place the movieclips randomly on the stage but I am trying to randomly populate shapes with movieclips.
Code:
ball_mc.x = Math.random() * stage.stageWidth;
I tried just replacing stage.stageWidth with box_mc.width but that didnt work. Also, I wanted to create more complicated shapes for their bounding area then just a movieclip's rectangle.
I have an mp3 playing. What I would like is to have a movieclip that is located in the library appear, complete it's animation then get removed. The movie clip must complete this proccess 4 times, randomly during the length of the song but never at the same time and not in the last 5 seconds of the song. BTW I can't do this manually by just firing it off a random amount of times because this code will be used with lots of different mp3's, so I need to use the dynamic data I get by retrieving the song length. I have the code working to retrieve the length of the song, and I have a variable that stores the length minus 5 seconds from the end, so I basically have the length of time I wish to work with.
My problem is making the movie clips appear 4 times randomly throughout that length of time. The code is below (what I have so far), the movieclip is stored in the library as circle_mc. The timer I'm using at the beginning of the code (to retrieve the length of the song) is set to run after 2 seconds this is because there is a delay in the music starting and if it did it instantly the number retrieved obviously would be 0, so I delay it by 2 secs till I know the song is playing. At the moment I'm just trying to get it to fire twice, at the moment it fires once or not at all.
Code:
import flash.media.Sound;
import flash.net.URLRequest;
import flash.media.SoundMixer;
import flash.utils.ByteArray;
import caurina.transitions.Tweener;
[Code] .....
i have been trying to understand the basics of trigonometry, and after a lot of tutorials I am at level 0....
I have this bit of code that draws a cicle on the stage
[Code]...
I would like to place small movieclips on the path of this circle..
I am trying to call objects from the library for a collection game.
Having major issues with the best way to assign the good objects and the bad objects to later update a score.
how i can first assign the movieClips from the library into a good and bad array and then after randomally fill the stage with them.
I want to randomly load 3 animations in a topbanner on my website. The 3 animations are placed inside their own movieclip and loaded to the stage by using "attachMovie". This works fine. But when a movieclip is loaded to the stage and the animation inside of it is finished playing how do i attach or load another movieclip randomly to the stage?
[Code]...
I want the final result to be a stage with a certain number of circle MC's moving around. I have made the circle MC, and added the AS so that it will start at a random point with a random color, then start moving around randomly. I want to make it so that In the beginning the document will duplicate the movie clip x amount of times, using a for loop. I want to then have all the new circles move around, and when two circles hit each other, they will dissappear, using the removeclip function. You can only use this on duplicated movieclips though, so how would i make all the circles duplicated? Is there a way to duplicate the original movieclip x amount of times then delete it? Or is there a way to remove the original after it is in a collision? Also I don't know how to do the collision detection. I am thinking of using a hittest, but would I just do it with a for loop? Is there a way so that if an MC hits any other MC?
View 3 RepliesI am trying to develop a program which attaches movieclips randomly around a point. The attached movieclips should not overlap each other.
View 2 Repliesscreen size: 550 x 400 i want to spawn movie clips randomly from the upper part of the screen and to make them go to the bottom. My game name is coin collector, so i want to spawn coins falling down and make my stickman catch'em.
ActionScript Code:
Add the AS2 in a box like this one
I am working on a website where I have some movieclips on the stage scattered. Some overlapping each other. Now when I move my mouse over any movieclip, I want the movieclips around it to move away from it and when I rollout they should get back in place. An example of this can bee seen on [URL].
View 6 Replies